New Genesis type atomizer by DID!

[Cloud Wizard]

Hehe

Your not setting a good example for the youngins. Lets see how far off the chart you were. I'm pretty sure the chart doesn't go this high...

You my friend were seriously in the pink!!

LOL, I have one of those charts (made one when I started vaping - 9 days till 1 year). I haven't looked at it in a looong time (have an electrical calculator on my iPhone). But you are right that it was a careless experiment (I should've thought it through first)

 

[MiriamWTH]

Hehe

Your not setting a good example for the youngins. Lets see how far off the chart you were. I'm pretty sure the chart doesn't go this high...

You my friend were seriously in the pink!!

Hmm going off that chart I am always in the red.

 

[kwalka]

With RBAs flooding the market and noobs everywhere starting to build coils, I've been plastering this all over the forum. vaping stacked batts at 25+watts can be a very enjoyable vape, but it must be done safely and one must understand the science behind it and what can happen. A popped coil is best case scenario.

Vape safe keep it legal!

 

[yankeebobo]

Hehe

Your not setting a good example for the youngins. Lets see how far off the chart you were. I'm pretty sure the chart doesn't go this high...

You my friend were seriously in the pink!!

PINK?! THAT looked like it travelled into a new color off the sheet. DEEP RED!

 

[kwalka]

YANKEE Happy new year!

 

[yankeebobo]

YANKEE Happy new year!

Same to you!

 

[jhjohnson123]

Hey guys. I have 2 questions. Does the poldiac button line up with the wick? Also, I have been using the kick and at 9 watts I am getting the same vape I do at 10 watts on my provari. Is there some reason for this? Its just bothering me.

 

[rwechsler]

Yes I have. Now I need another 18650 tube so I can stack my MNKE 18650s
Now with that being said, I haven't managed to successfully wrap a 7.4v genesis coil yet! I've gotten 6v to work fine, but my current goal is to get a well broken in 10 wrap of 26g vaping at 7.4v! Maybe that's what I'll spend the rest of the day playing with

Has anyone tried stacking batteries yet? Seems to me that combining the 18650 tube + 18350 tube = stacked 18500's....


Edit: Well, I now know what happens - POP!!!!
I only have AW IMR 18490's so they were a little short. I added a magnetic spacer to each and first hit button pulse - snap-crakle-pop... Using a 4/5 30awg on a wick-wide (2.8mm) in a Gemini. Resistance was in the ~1.2ohm range. I'm guessing ~59 watts wasn't a good starting point (8.4v!1.2ohm). If I try it again it'll be on 1/2 dead batts with a few more wraps.

 

[studiovap]

Yes I have. Now I need another 18650 tube so I can stack my MNKE 18650s
Now with that being said, I haven't managed to successfully wrap a 7.4v genesis coil yet! I've gotten 6v to work fine, but my current goal is to get a well broken in 10 wrap of 26g vaping at 7.4v! Maybe that's what I'll spend the rest of the day playing with

I've had a go with 7.4v using 32g, which I am no longer a fan of. Not great results. Dual 28g coils in series is the way to go, buggered if I can wire them up though

 

[Pete54]

Hey guys. I have 2 questions. Does the poldiac button line up with the wick? Also, I have been using the kick and at 9 watts I am getting the same vape I do at 10 watts on my provari. Is there some reason for this? Its just bothering me.

You can make the button line up anywhere you want to by adjusting the positive post as shown in Ricks video.

 

[Pete54]

Jim, I haven't hidden the button yet (other than to see how it works). I still think it's a great design but why would I ever want to turn it off!
Can't wait for the brass accents and that cool slotted shirt if it becomes available.

 

[studiovap]

Running 100m solid #200 mesh wick with a 28g 6wrap coil at 1ohm at present with very surprising good results.

 

[Out Of The Ashes]

Hi all, I'm about to buy a Temon B.T.O. Would you recommend the 500 or 650 tube and does anyone have a preference on brass or SS connectors?

 

[Conard]

I've only locked the button a few times.
I can slide the Poldaic into my watch pocket and the button is still exposed.

I would keep it as part of the design if possible. It adds to the coolness of the design of this bad boy.

 

[2GLR]

Hi all, I'm about to buy a Temon B.T.O. Would you recommend the 500 or 650 tube and does anyone have a preference on brass or SS connectors?

To answer this question I spent all day at work and then 4 hours at the bar. I would suggest you buy the whole set. 650's to get the business done, and 500's to get past the cougars. I currently have used the brass on both tubes with no significant differences. The 650's do seem to hit a little better for me.

 

[Out Of The Ashes]

I wish I could get the full set, but it took me a while to gather enough money for the B.T.O. $72 donsn't sound like much but when you don't have it it is. Interesting about the 650 hitting better. Do you have a preference, cosmetically, with the brass .vs SS?

To answer this question I spent all day at work and then 4 hours at the bar. I would suggest you buy the whole set. 650's to get the business done, and 500's to get past the cougars. I currently have used the brass on both tubes with no significant differences. The 650's do seem to hit a little better for me.

 

[2GLR]

I prefer the clean look of the SS.

 

[Out Of The Ashes]

Were do you get your 14650 bats? I've only seen efest, does AW make that size?

 

[2GLR]

Efest from CCV

 

[Out Of The Ashes]

Screw it, I'm overthinking this. Anything I get from Jim will be wonderful. Just purchased my Temon.

Temon B.T.O.

• Atomizer : Temon
• Battery Tube Dimensions : 14650
• Button+Top Connector : Stainless Steel, Finish : Polished

Stainless Steel Drip tip ENA

• Finish : Polished