New Genesis type atomizer by DID!

[Cloud Wizard]

Congrats gmtrh, she's a beauty!

 

[Cloud Wizard]

OK...so I bought a completely polished Poldiac and polished DID on 1/5/12...(I have a mini and a Gemini already.)

So what do I do on the 21st?

-- O-rings set for the DID and Short-DID
-- Orings set for the Mini DID
-- Set of 3 Nuts for the "DID" and "Short-DID"
-- Bottom Connector Insulation Spacer
-- Stainless Steel nut for Mini DIDgeminiTemon
-- Insulation spacer for DID Top Cap
-- Insulation spacer for Mini DID/Gemini/Temon Top Cap.
-- Atomizer The SHORT DID - Airhole : 1.20mm, Finish : Satin
-- Poldiac BTO - Body Tube Finish : Satin,
Bottom End Cap Finish : Satin,
Button Body Finish : Satin,
Pant Tube Finish : Satin,
Shirt Finish : Satin,
Shirt Type : Slotted,
Top End Cap Finish : Satin
-- Shirt for Poldiac - Material : Brass, Shirt Finish : Satin, Shirt Type : Slotted
-- Shirt for Poldiac - Material : Brass, Shirt Finish : Polished, Shirt Type : Slotted
-- Pant for Poldiac - Dimensions : 18650, Finish : Satin, Material : Brass
-- Pant for Poldiac - Dimensions : 18500, Finish : Satin, Material : Brass
-- Pant for Poldiac - Dimensions : 18350, Finish : Satin, Material : Brass
-- Pant for Poldiac - Dimensions : 18650, Finish : Polished, Material : Brass
-- Pant for Poldiac - Dimensions : 18500, Finish : Polished, Material : Brass
-- Pant for Poldiac - Dimensions : 18350, Finish : Polished, Material : Brass
-- Poldiac contacts set
-- O-rings set for the Poldiac
-- Magnets for the Poldiac

I had to sell a few "lesser" mods to swing it...but I'm sold!

Holy moly! Now that's "stocking up for the winter"...

 

[gmtrh]

Yes I know, polished topcap, bottomcap and button body with satin clothes and satin body tube is so old, but still very sexy

DiDs and Gemini body is in satin as well.

I love it, vapes excellent

 

[Mata]

I have found this nice pic on FB

The guy milled an hole on a spare 18350 tube and the result is a nice did shield that in my
opinion makes the Poldiac/D20 combo look better.
I will definitely try that with an extra Poldiac button shirt as my milling skill is below poor

 

[Brigit]

OK...so I bought a completely polished Poldiac and polished DID on 1/5/12...(I have a mini and a Gemini already.)

So what do I do on the 21st?

-- O-rings set for the DID and Short-DID
-- Orings set for the Mini DID
-- Set of 3 Nuts for the "DID" and "Short-DID"
-- Bottom Connector Insulation Spacer
-- Stainless Steel nut for Mini DIDgeminiTemon
-- Insulation spacer for DID Top Cap
-- Insulation spacer for Mini DID/Gemini/Temon Top Cap.
-- Atomizer The SHORT DID - Airhole : 1.20mm, Finish : Satin
-- Poldiac BTO - Body Tube Finish : Satin,
Bottom End Cap Finish : Satin,
Button Body Finish : Satin,
Pant Tube Finish : Satin,
Shirt Finish : Satin,
Shirt Type : Slotted,
Top End Cap Finish : Satin
-- Shirt for Poldiac - Material : Brass, Shirt Finish : Satin, Shirt Type : Slotted
-- Shirt for Poldiac - Material : Brass, Shirt Finish : Polished, Shirt Type : Slotted
-- Pant for Poldiac - Dimensions : 18650, Finish : Satin, Material : Brass
-- Pant for Poldiac - Dimensions : 18500, Finish : Satin, Material : Brass
-- Pant for Poldiac - Dimensions : 18350, Finish : Satin, Material : Brass
-- Pant for Poldiac - Dimensions : 18650, Finish : Polished, Material : Brass
-- Pant for Poldiac - Dimensions : 18500, Finish : Polished, Material : Brass
-- Pant for Poldiac - Dimensions : 18350, Finish : Polished, Material : Brass
-- Poldiac contacts set
-- O-rings set for the Poldiac
-- Magnets for the Poldiac

I had to sell a few "lesser" mods to swing it...but I'm sold!

That's not grabbing of the shelve
that's making a choice!
Set for life (not just the winter, CW )
I like it when I see people doing that, no matter what they choose!

Looking forward to your review, A.G.
With this package you can sure show the unique dressing option.



Now, about battery's......

 

[Brigit]

Yes I know, polished topcap, bottomcap and button body with satin clothes and satin body tube is so old, but still very sexy

DiDs and Gemini body is in satin as well.

I love it, vapes excellent

Well, if 3 weeks is old, I'm ancient...

Love your new satin set up!

 

[Felonyruckus]

Seriously satin brass for the shirt and pants look amazing.

 

[Felonyruckus]

Jim take care of yourself...now I understand why so many people have waiting list for other mods. I think that the Poldiac is a legitimate mod to have patience. When I ordered mine and had it so quickly, I felt like I cheated the world and those that were on waiting lists for other mods that aren't quite as good were getting cheated.

Made me laugh because I took the Poldiac to a very popular vape lounge and one of the guys was like, "That's nothing on the ___ ___ "(it will remain nameless) I said "Have you even heard of a Poldiac?" Do you know what the cocky ... guy said? THIS IS A SALESMAN!! "I'm too busy to research things." I was like, well welcome to Douchebagistan!

sorry venting

 

[studiovap]

I have found this nice pic on FB

The guy milled an hole on a spare 18350 tube and the result is a nice did shield that in my
opinion makes the Poldiac/D20 combo look better.
I will definitely try that with an extra Poldiac button shirt as my milling skill is below poor

Who needs to see the liquid, all stainless hey dspin

Take two mini DID o rings one 18350 pants sleeve.

 

[Felonyruckus]

[/QUOTE]

BADASS!!!

 

[studiovap]

Who needs to see the liquid, all stainless hey dspin

Take two mini DID o rings one 18350 pants sleeve.

It is very heavy in this configuration though as much as i like the looks, great home defense instrument

 

[AlmightyGod]

Although the shipping isn't inexpensive, the expedience is fantastic!

Indianapolis, IN, United States 01/24/2013 7:32 A.M. Out For Delivery
01/24/2013 5:14 A.M. Arrival Scan
Louisville, KY, United States 01/24/2013 3:05 A.M. Departure Scan
Louisville, KY, United States 01/23/2013 2:31 P.M. Import Scan
01/23/2013 11:49 A.M. Arrival Scan
Philadelphia, PA, United States 01/23/2013 9:54 A.M. Departure Scan
01/23/2013 7:26 A.M. Arrival Scan
Koeln, Germany 01/23/2013 5:17 A.M. Departure Scan
01/23/2013 12:23 A.M. Arrival Scan
Muenchen, Germany 01/22/2013 11:12 P.M. Departure Scan
01/22/2013 10:19 P.M. Arrival Scan
Spata, Greece 01/22/2013 8:40 P.M. Departure Scan
01/22/2013 7:59 P.M. Arrival Scan
Athens, Greece 01/22/2013 7:57 P.M. Departure Scan
01/22/2013 7:30 P.M. Origin Scan
01/22/2013 4:20 P.M. Pickup Scan
Greece 01/22/2013 7:27 A.M. Order Processed: Ready for UPS

 

[Cloud Wizard]

Although the shipping isn't inexpensive, the expedience is fantastic!

Indianapolis, IN, United States 01/24/2013 7:32 A.M. Out For Delivery
01/24/2013 5:14 A.M. Arrival Scan
Louisville, KY, United States 01/24/2013 3:05 A.M. Departure Scan
Louisville, KY, United States 01/23/2013 2:31 P.M. Import Scan
01/23/2013 11:49 A.M. Arrival Scan
Philadelphia, PA, United States 01/23/2013 9:54 A.M. Departure Scan
01/23/2013 7:26 A.M. Arrival Scan
Koeln, Germany 01/23/2013 5:17 A.M. Departure Scan
01/23/2013 12:23 A.M. Arrival Scan
Muenchen, Germany 01/22/2013 11:12 P.M. Departure Scan
01/22/2013 10:19 P.M. Arrival Scan
Spata, Greece 01/22/2013 8:40 P.M. Departure Scan
01/22/2013 7:59 P.M. Arrival Scan
Athens, Greece 01/22/2013 7:57 P.M. Departure Scan
01/22/2013 7:30 P.M. Origin Scan
01/22/2013 4:20 P.M. Pickup Scan
Greece 01/22/2013 7:27 A.M. Order Processed: Ready for UPS

Yeah, the new shipping is great. Jim used to have USPS as an option and it was crazy how long shipments would just sit in customs in NYC. Literally 2-3 days for MMV to ship and then 3-4 weeks with customs (made folks nuts...)

 

[Cloud Wizard]

Wow, that looks cool. Unlike Dave, I'm still fascinated by the "Lava Light" mystique of clear tanks (bubbles are just fun...) but think after work today I will try this with my Pol in 500 mode and the 350 pants over a std sized DID.

 

[strprswpr]

I have found this nice pic on FB

The guy milled an hole on a spare 18350 tube and the result is a nice did shield that in my
opinion makes the Poldiac/D20 combo look better.
I will definitely try that with an extra Poldiac button shirt as my milling skill is below poor

Button shirt has a thinner wall. I thought about that....But the hole didn't line up with the clear tube on my tank....So I milled my own hole. I think I might do it to my other Poldiac.....Maybe have the hole on both sides.
Another thing is now I can find the button easier when I'm driving at night. I feel for the hole.....

 

[rwechsler]

Blindly feeling for the hole can get you in a whole lotta trouble sometimes
Just last night my poldiac ended up rolling around the floor of my car b/c my aim wasn't too good...

Button shirt has a thinner wall. I thought about that....But the hole didn't line up with the clear tube on my tank....So I milled my own hole. I think I might do it to my other Poldiac.....Maybe have the hole on both sides.
Another thing is now I can find the button easier when I'm driving at night. I feel for the hole.....

 

[Cloud Wizard]

I have the patience of a 3 year old (couldn't wait till after work).

 

[Uma]

Yes I know, polished topcap, bottomcap and button body with satin clothes and satin body tube is so old, but still very sexy

DiDs and Gemini body is in satin as well.

I love it, vapes excellent

Congrats!! It's beautiful!! A very classy combo indeed. The Poldiac is going to be heralded as the Liz Taylor/Jackie Onassis of the vaping world. It's variety of poses will never grow old, we'll always want more pics of these beauties.

Jim take care of yourself...now I understand why so many people have waiting list for other mods. I think that the Poldiac is a legitimate mod to have patience. When I ordered mine and had it so quickly, I felt like I cheated the world and those that were on waiting lists for other mods that aren't quite as good were getting cheated.

Made me laugh because I took the Poldiac to a very popular vape lounge and one of the guys was like, "That's nothing on the ___ ___ "(it will remain nameless) I said "Have you even heard of a Poldiac?" Do you know what the cocky ... guy said? THIS IS A SALESMAN!! "I'm too busy to research things." I was like, well welcome to Douchebagistan!

sorry venting

That's sad and too often too true, about the research they do. Most of them rely on the salesmen that drop by their establishments, or rely on their hired shoppers to stock their stores for them. But after seeing your Poldiac first hand, I bet that store owner delegated the rest of the day's workload to his employees and headed straight to Google.

BADASS!!![/QUOTE]
I'll second that!

Button shirt has a thinner wall. I thought about that....But the hole didn't line up with the clear tube on my tank....So I milled my own hole. I think I might do it to my other Poldiac.....Maybe have the hole on both sides.
Another thing is now I can find the button easier when I'm driving at night. I feel for the hole.....

That is so brilliant!


Congrats to all the new owners of Jim's creations!!
I hope Jim is feeling better today.

 

[Uma]

Looks sharp Cloud!!!

 

[Cloud Wizard]

Looks sharp Cloud!!!

LOL, thx Uma. Not my idea, just can't help trying new stuff I already took it back off, looks pretty cool but it makes a pretty loud whistling noise that was getting on my nerves.