On the site it mentions to drop about 7 drops on the atty...normal dripping requires 2-3...did I read that right?
New HV and LR 306 atomizers from ikenvape.com
- Thread starter atavanhalen
- Start date
- th_trl_thread_readers 0
- Status
I think that part of the reason for this is there is quite a bit of wicking material below the bridge.
I have modded my 306 Attys by tying a knot of extra wicking material around the bridge and cutting off the excess and leaving about 1/8 of an inch extra and am using my 306's this way with my bottom feeding mod and it is seriously kicking some but, I have noticed it doesn't burn, give extra flavor, great vapor, and it seems to hold the liquid better and I don't have to pump my button as much to deliver liquid, give it a try guys you may just like this.!! I used the wicking material from some of the newer CE2R4 Carto's by the way.!
. Sounds like a good idea. I don't have any bottom feeders but I do want one. Is there any place that you know of that sells just wicking material?
Are the drip tips in stock yet? I want to pickup a couple 306's but don't have any tips! And i don't feel like going to another vendor for just that one thing.
They're coming Geoff BUT they haven't exactly shipped yet. I have something Very new and very special being produced which I think might take the cake in cartomizer development or atleast another stepping stone, either way it's revolutionary and may even change the cartomizer world. Regrettably, this new unit will be in transit with the drip tips, causing the delay. I'm estimating 2 weeks till arrival of this particular shipment.
YouTube - BlueprintDK's Channel
Although this video is in Dutch, a picture is worth 1K words. A simple solution that will get you by until they do arrive.
Ahh I get it, so he's using a 510 atomizer/cartomizer body over the the 306 atom, by securing it on by cutting just a slice of the 306's orange cap to wedge it into place. Genius!
Begins at 4:04 min.
Thanks for the link Switcher!
No probs! I didn't have a DT either and this works like a charm. I used a old CE2 cart for my mod (the one that tasted like kerosene) I got some use out of it after all
This little 306/510 slip joint works perfectly I cut only a half inch of a stock 306 and used a 510 with even a little small 510 drip tip on the end of that and it is perfect
What do you do...just pull out the battery connector off of an old 510? Using pliers or something?
Thank you Van!
You heard him right folks!
We now have the small and powerful 306 in IKV signature 3.5Ω High Voltage and 2.0Ω Low Resistance!
We also have 306 Drip tips in Transit!
When you get these please let us know.... I would love to try the 306 LR attie..... well after reading Switches review I just gotta try them.....
LOL, reading Switched's reviews can be hazardous towards one's prosperity. However, if these perform for the length of time the rest of his atties perform, you will be ahead
LOL, reading Switched's reviews can be hazardous towards one's prosperity. However, if these perform for the length of time the rest of his atties perform, you will be ahead
lol... I don't know about hazardous more like uplifting to one's enjoyment of vaping.... your reviews are always to the point and such a great read... I bet a lot of people benefit from your info....... Have you thought about doing videos along with your writings?
LOL, you do have a point wrt uplifting one's enjoyment. I never thought of it that way. No just written reviews no cameras for me.
When you get these please let us know.... I would love to try the 306 LR attie..... well after reading Switches review I just gotta try them.....
Haha I was just showing this to a customer just a few hours ago. This is my tracking information on this shipment.
Thursday, November 04, 2010 Location Time
14 Processed at SEATTLE - USA SEATTLE, WA - USA 18:07
13 Shipment arrived at incorrect facility. Sent to correct destination SEATTLE, WA - USA 09:45
12 Arrived at Delivery Facility in SEATTLE - USA SEATTLE, WA - USA 08:14
11 Arrived at Sort Facility SEATTLE - USA SEATTLE, WA - USA 06:10
10 Departed Facility in CINCINNATI HUB - USA CINCINNATI HUB, OH - USA 04:57
9 Processed at CINCINNATI HUB - USA CINCINNATI HUB, OH - USA 03:17
8 Clearance processing complete at CINCINNATI HUB - USA CINCINNATI HUB, OH - USA 01:35
7 Arrived at Sort Facility CINCINNATI HUB - USA CINCINNATI HUB, OH - USA 01:35
Wednesday, November 03, 2010 Location Time
6 Departed Facility in HONG KONG - HONG KONG
- Status
Similar threads
