Got them used from a local fellow vaper & I'm enjoying every minute of it 
Thank you for the innovation Atmomixani~
Thank you for the innovation Atmomixani~
- Status
Can't believe how much I'm loving my Nemi! IGO-S with 17mm Cap It All Fauxgotti, rebuilt yesterday to 0.88 ohms (20W/4.7A @ 4.2V) with a 4/5 wrap of 28GA on a 5/64" bit, cotton wicked. Upgraded to magnets - love that too.
If I believe the 10C rating on the Efest 14650, I'm running this build at half of what it could do. My only complaint is how loose the top cap fits - too easy to slip off (can't hold the mod by the cap). A hybrid dripper would be nice, but just like my full-sized mixed matte Nemesis, I wouldn't want to lose the top brass. The Nemi in particular would look funny with the lock ring being the only brass, IMHO.
Can't wait for the tax return check - my collection's going to grow!
PS CannedWolf - I used a very sharp 'hobby knife' and traced a ring around the convex negative end of the 14650. Not perfectly round, but not too close to the edge, and solved the Nemi firing problem. All 3 of the 14650's I got had too much shrinkwrap, but all 3 work fine now.
If I believe the 10C rating on the Efest 14650, I'm running this build at half of what it could do. My only complaint is how loose the top cap fits - too easy to slip off (can't hold the mod by the cap). A hybrid dripper would be nice, but just like my full-sized mixed matte Nemesis, I wouldn't want to lose the top brass. The Nemi in particular would look funny with the lock ring being the only brass, IMHO.
Can't wait for the tax return check - my collection's going to grow!
PS CannedWolf - I used a very sharp 'hobby knife' and traced a ring around the convex negative end of the 14650. Not perfectly round, but not too close to the edge, and solved the Nemi firing problem. All 3 of the 14650's I got had too much shrinkwrap, but all 3 work fine now.
Last edited:
Can't believe how much I'm loving my Nemi! IGO-S with 17mm Cap It All Fauxgotti, rebuilt yesterday to 0.88 ohms (20W/4.7A @ 4.2V) with a 4/5 wrap of 28GA on a 5/64" bit, cotton wicked. Upgraded to magnets - love that too.
If I believe the 10C rating on the Efest 14650, I'm running this build at half of what it could do. My only complaint is how loose the top cap fits - too easy to slip off (can't hold the mod by the cap). A hybrid dripper would be nice, but just like my full-sized mixed matte Nemesis, I wouldn't want to lose the top brass. The Nemi in particular would look funny with the lock ring being the only brass, IMHO.
Can't wait for the tax return check - my collection's going to grow!
PS CannedWolf - I used a very sharp 'hobby knife' and traced a ring around the convex negative end of the 14650. Not perfectly round, but not too close to the edge, and solved the Nemi firing problem. All 3 of the 14650's I got had too much shrinkwrap, but all 3 work fine now.
I'm glad trimming the plastic worked for you and equally as glad that you are enjoying it.
As for the dripper, keep your eyes on the forum. Katerina posted some initial pics some time ago on the Nemi hybrid dripper... and a follow up with a brass ring on it as well (which addresses your concern with only the brass locking ring). No idea when they are coming... I'm guessing they will be here when they are ready
Quick question for all those who are regulars. My friend decided to try and shave down his Nemesis top pin because of large gaps he was getting down by the switch. Long story short now he has a super short and pretty much fubar top pin lol. Does anyone know of anyplace in US selling these so he doesn't get killed on shipping for just a pin?
Thanks for everyone's time.
Thanks for everyone's time.
Is the 3d being sold in other US shops aside from VapeRev? I saw another US shop selling the 3d but wanted to make sure that they're not trying to sell off a clone as an original
VapeRev has the extended top pin - didn't see the standard top pin. Does your friend have the Kick ring installed? Might be an option.
Here's a list of authorized resellers: https://www.facebook.com/notes/atmomixanigr/atmomixani-points-of-sale/354712881327259
Thanks for the link! I saw this, a US shop and I felt doubtful especially because they're selling both clones and authentics and I remember seeing somewhere that VR is the only authorized US seller
(Per Loco69 - removed the link to the unauthorized site)
Last edited by a moderator:
I've seen the standard pins there before. An option is to get the long ones and shave those as well (though, I prefer the kick ring look myself)
I would like to inform you that on Monday 03-03-2014 is a holiday in Greece and therefore all the orders will be shipped on Tuesday 04-03-2014..
Yep. Petros is still doing them to the best of my knowledge. As I understand it, the list is huge and its being done by one guy so, it takes time.
When I got on the list the first time, it was about 1 - 2 weeks after he initially announced them and it took 3 months to get mine. I am very sure there are more on the list now than there were then.
If I were you, I would send him a note with something like "hey - no rush and I dont want to be pushy but, i wanted to check and make sure I am still on the list and to see if you need anything from me" or something similar (just don't do the "where's my mod!" because that's rude
)I'm sure he will get back to you. It may not be right away but, he will. I know he is super busy these days...
Hope that helps.
Edit - the quality is worth the wait (which I'm sure you already know). you could also check the classifieds from time to time or create a want ad. I have seen a few get sold here.
Last edited:
Dome Air control shields
Protects the glass and give a different look to your dome atomizer
https://www.atmomixani.gr/index.php...omizer2013-11-29-11-41-51_/dome-supplies.html
Protects the glass and give a different look to your dome atomizer
https://www.atmomixani.gr/index.php...omizer2013-11-29-11-41-51_/dome-supplies.html
Can I just get a VW Edition Nemesis? I've been waiting so long I might need to get on the list for a custom edition. It might be faster.
- Status
Similar threads
