New Projects by Atmomixani

[JohnD0406]

Just a suggestion... You know what would be really cool? A 30mm mod to 22mm 510 adapter, without airflow control, to make it look more hybrid. Current 26650 series atomizers are all over the place in size, and I can't say I've seen any 30mm at all. Maybe you have a 30mm hybrid atomizer planned, but that 30mm to 22mm would be awesome!

PS - I don't know if I'd be crazy about a 30mm atomizer really. Maybe the Russian, if they kept the chamber size the same. More air space in a dripper is not a good thing for flavor, though it would hold more juice. Reduced air chamber atomizers really seem to bring out the flavor. Think kayfun/Russian. I have a KFL+ v1 on my mixed matte Nemesis, and that setup is my 'treat' when I come home from work.

Just my

 

[Cearamm]

@Loco69

Katerina, i just recieved my Nemi Nemesis and Anima combo. I wasnt sure theyd be worth $300 but now im sure! The engineeringand finish on them is nothing short of spectacular! They are the most beautiful pieces in my collection!

The nemi nemesis is waaaaaaay smaller than it looks in photos. So tiny! Its basically a mechanical mod but in Ego size and convenience. In 14500 even with a Penelope it disappears in the hand.

I can only say i will definitely be getting another nemi nemesis for myself, as this one is for my lady.

Thank yiu Anima for making elegant high end gear....it really sets a high standard!

 

[Loco69]

Just a suggestion... You know what would be really cool? A 30mm mod to 22mm 510 adapter, without airflow control, to make it look more hybrid. Current 26650 series atomizers are all over the place in size, and I can't say I've seen any 30mm at all. Maybe you have a 30mm hybrid atomizer planned, but that 30mm to 22mm would be awesome!

PS - I don't know if I'd be crazy about a 30mm atomizer really. Maybe the Russian, if they kept the chamber size the same. More air space in a dripper is not a good thing for flavor, though it would hold more juice. Reduced air chamber atomizers really seem to bring out the flavor. Think Kayfun/Russian. I have a KFL+ v1 on my mixed matte Nemesis, and that setup is my 'treat' when I come home from work.

Just my

A slanted cap is already in our projects to make...

 

[Loco69]

@Loco69

Katerina, i just recieved my Nemi Nemesis and Anima combo. I wasnt sure theyd be worth $300 but now im sure! The engineeringand finish on them is nothing short of spectacular! They are the most beautiful pieces in my collection!

The nemi nemesis is waaaaaaay smaller than it looks in photos. So tiny! Its basically a mechanical mod but in Ego size and convenience. In 14500 even with a Penelope it disappears in the hand.

I can only say i will definitely be getting another nemi nemesis for myself, as this one is for my lady.

Thank yiu Anima for making elegant high end gear....it really sets a high standard!

It is a small set but you ll be impressed from the vape they can give you...
Anima rules...

 

[CannedWolf]

It is a small set but you ll be impressed from the vape they can give you...
Anima rules...

Echo this 100%. the Anima is a fantastic dripper. I own 2 and use them very frequently. you wont be disappointed.

Anima definitely rules

 

[Cearamm]

I just wanna give a shout out to Katerina and Mixalis...

I had a very small issue with my top delrin insulator and center pin. She sent out a replacement lightning fast and made no attempt to charge me anything!

This was a nitpicky problem with the threading but nonetheless she was understanding and great! Most modders simply wouldnt provide the same level of understanding and would charge, so i commend the guys at Atmomixani for truly caring about their customers! Great job


PS...do you have a rough estimate for when the Alecto will drop? I was guessing 2 months? Thanks again!

 

[CannedWolf]

I just wanna give a shout out to Katerina and Mixalis...

I had a very small issue with my top delrin insulator and center pin. She sent out a replacement lightning fast and made no attempt to charge me anything!

This was a nitpicky problem with the threading but nonetheless she was understanding and great! Most modders simply wouldnt provide the same level of understanding and would charge, so i commend the guys at Atmomixani for truly caring about their customers! Great job

the best part is this is standard for them. Hands down the best service in the industry... and some of the best service I've ever experienced not just in this industry, but in general.

 

[ronnieOFcloud9]

Do any of you own a legion? I had a question as to I just recently acquired one. As soon as I got mine I polished it own hoping I would get the mirrored brass top cap and lock ring/button but it seems my whole mod now is polished and I can't figure out how to get the factory finish. If that makes any sense. Can someone who owns a legion help me in getting the desired effect?

 

[Cearamm]

@Loco69

Any estimation on the release for Alecto? I am thinking of getting a 69 mod to get a side firing mod and i want a telescopic too. Plus the 69 is absolutely the most gorgeous of all telescoping and side firig mods.

I will need an Alecto too tho..just trying to plan.

Also, any chance of some new atomizers down the line? Maybe a silica based style ? Thanks again, your brand and work within Atmomixani is mind blowing

 

[Loco69]

@Loco69

Any estimation on the release for Alecto? I am thinking of getting a 69 mod to get a side firing mod and i want a telescopic too. Plus the 69 is absolutely the most gorgeous of all telescoping and side firig mods.

I will need an Alecto too tho..just trying to plan.

Also, any chance of some new atomizers down the line? Maybe a silica based style ? Thanks again, your brand and work within Atmomixani is mind blowing

I think Alecto will be ready after summer holidays....It is still in testing and we ll start production in the next days but i dont think we ll be ready before August...
At the moment i dont have any news for atomizers....;-)

 

[Loco69]

Do any of you own a legion? I had a question as to I just recently acquired one. As soon as I got mine I polished it own hoping I would get the mirrored brass top cap and lock ring/button but it seems my whole mod now is polished and I can't figure out how to get the factory finish. If that makes any sense. Can someone who owns a legion help me in getting the desired effect?

Ιf you didnt use any abbrasive method to polish and you leave it without polishing for a while will become as before again...;-)

 

[Loco69]

Nemesis Ss with New engravement are almost ready
I ll let you know when is the release

Some photos for now from the new engravement...

 

[BluSwatch]

Nice! I like the mixed.

 

[JohnD0406]

Ιf you didnt use any abbrasive method to polish and you leave it without polishing for a while will become as before again...;-)

Isn't the Legion a mix of polished ends and brushed tubes? Sounds like he polished the tubes and wants them brushed again. From my limited experience, get a GP "PnB" tool (male + female 510 connections with the other end that goes into a drill) and some Scotch-Brite green pads, and let it spin. Take off the AFC ring first, of course, or you'll brush that too. Aside from the PnB tool, you could use an old cartomizer in a drill, just don't tighten it too much. You could also gut the cartomizer and fill it with epoxy to make it stronger. The PnB lets you polish/brush atty's also.

I'd still like to know the "secret sauce" Atomomixani uses in their manufacturing of brushed tubes...

 

[CannedWolf]

Isn't the Legion a mix of polished ends and brushed tubes? Sounds like he polished the tubes and wants them brushed again. From my limited experience, get a GP "PnB" tool (male + female 510 connections with the other end that goes into a drill) and some Scotch-Brite green pads, and let it spin. Take off the AFC ring first, of course, or you'll brush that too. Aside from the PnB tool, you could use an old cartomizer in a drill, just don't tighten it too much. You could also gut the cartomizer and fill it with epoxy to make it stronger. The PnB lets you polish/brush atty's also.

I'd still like to know the "secret sauce" Atomomixani uses in their manufacturing of brushed tubes...

Since brass is a softer metal, I would be careful with a drill based tool. do it by hand VERY lightly with scotchbrite or steel wool. Remember, slow and steady wins the race. be SUPER careful.

 

[Loco69]

NEXT RELEASE BY ATMOMIXANI


on Tuesday 01-07-2014 at 09.30 a.m. , local Time Athens, Greece.
You can see the difference in time here The World Clock

The release will be made in our new site.Please reset your password if you havent done already

How to reset your password?

1. Follow the link "Forgot your password".
2. Fill in your email address and press the button "Retrieve Password".
3. In a few minutes you will receive an email in order to complete the process. Check your SPAM Mailbox folder also in case you cannot find the email on your Inbox.

In any case, if you encounter any problem on the reset password procedure, please contact with the webmaster@atmomixani.gr including the link for reseting the password you had received on the email in order to help you with the password retrieval procedure.



Products to be available

Nemesis Ss Matte Cnc Engraved
https://eshop.atmomixani.gr/en/by-atmomixani/154-nemesis-matte.html

Nemesis Ss Shined Cnc Engraved
https://eshop.atmomixani.gr/en/by-atmomixani/151-nemesis-shined.html

Nemesis Ss Vw Cnc Engraved
https://eshop.atmomixani.gr/en/by-atmomixani/153-nemesis-vw-edition.html

Nemesis Naval Brass Cnc Engraved
https://eshop.atmomixani.gr/en/by-atmomixani/192-nemesis-brass.html

Also available

69 Telescopic Mod(2 editions)
https://eshop.atmomixani.gr/en/13-69-telescopic-mod-devices

Loki Tank V2 in ss shined and mate and brass shined and matte(4 editions)
https://eshop.atmomixani.gr/en/20-loki-tank-devices

Striker atomizer for Nemesis(4 editions)
https://eshop.atmomixani.gr/en/by-atmomixani/39-striker-matte-for-nemesis.html
https://eshop.atmomixani.gr/en/by-atmomixani/3-striker-ice-shined-for-nemesis.html
https://eshop.atmomixani.gr/en/by-atmomixani/75-striker-shined-for-nemesis.html
https://eshop.atmomixani.gr/en/by-atmomixani/78-striker-ice-matte-for-nemesis.html

Striker atomizer for 69(4 editions)
https://eshop.atmomixani.gr/en/by-atmomixani/76-striker-shined-for-69-mod.html
https://eshop.atmomixani.gr/en/by-atmomixani/84-striker-ice-shined-for-69-mod.html
https://eshop.atmomixani.gr/en/by-atmomixani/73-striker-matte-for-69-mod.html
https://eshop.atmomixani.gr/en/by-atmomixani/74-striker-ice-matte-for-69-mod.html

Striker atomizer 510(4 editions)
https://eshop.atmomixani.gr/en/by-atmomixani/194-striker-matte-510.html
https://eshop.atmomixani.gr/en/by-atmomixani/77-striker-shined-510.html
https://eshop.atmomixani.gr/en/by-atmomixani/79-striker-ice-matte-510.html
https://eshop.atmomixani.gr/en/by-atmomixani/80-striker-ice-shined-510.html

Dome Atomizer(4 editions)
https://eshop.atmomixani.gr/en/25-dome-atomizer

3D Atomizer(4 editions)
https://eshop.atmomixani.gr/en/28-3d-dimmi-s-dream-dripper

Nemi(2 editions)
https://eshop.atmomixani.gr/en/31-nemi-devices

Anima Atomizer(8 editions)
https://eshop.atmomixani.gr/en/40-anima-atomizer

Steam machine(5 editions)
https://eshop.atmomixani.gr/en/11-steam-machine-devices

Anodized Tubes
https://eshop.atmomixani.gr/en/21-nemesis-anodized-aluminum-tubes

 

[Cearamm]

I ordered my erics edition 69 mod the day before the new cnc steel tubes are announced. Baaaaah humbug.

I may be in a minority but i may prefer the original laser engravement. If only it was deeper and thicker to stand the test of time. Maybe thats not possible with laser engravin? Iduno.

If i do grab a cnc steel piece i may try to inlay the engraving with dark brown/black enamel or something to bring it out. I just love the darkness of the brand new lasered nemesis out of the bag. It just looks absolutely stunnin to me. Because the heat isnt there with cnc engraving, the metal doest change colors. It still looks absolutely stunning but you get my point.

 

[Loco69]

Will have them ready in July

Will be available in 4 editions
Full matte
Full Shined
Nyx edition(matte tube)
Aether edition(shined tube)

 

[Mr.Mann]

Will have them ready in July

Will be available in 4 editions
Full matte
Full Shined
Nyx edition(matte tube)
Aether edition(shined tube)

This is almost too weird. The Nemesis logo is so ubiquitous now -- which may be why you all changed the logo -- but for me to "accept" this, it's going to take a while (maybe all the way until July? LOL).

 

[BluSwatch]

WHEN July? LOLOL