Well i don't want to have to suck so hard to get the throat hit... Maybe more vapor but i know i prefer the airflow to be closed at the top of my wocket pod system because the flavor is better and i feel the air coming in more. I don't like not feeling how much I'm taking in
- Status
Skrr-S tank with GT CCell coils may be an option for you @DRB92, but you never know until you try. I use one as a fall back option from my RBA's.
GT CCell is rated at 0.5 ohm and the newer GT CCell 2 is rated at 0.3 ohm, personally I'd say the 0.5 ohm may be a good coil for you.
And the CCell coils do produce very good flavour.
GT CCell is rated at 0.5 ohm and the newer GT CCell 2 is rated at 0.3 ohm, personally I'd say the 0.5 ohm may be a good coil for you.
And the CCell coils do produce very good flavour.
And if you're interested in an RBA @DRB92, there's a lot of options.
For an RTA, the Coppervape Hussar Project X is probably one of the most easiest to work with.
Here's the thread link for more information.
Hussar Project X RTA Clone (by Coppervape)
And RDA's or Drippers are really easier to work with than RTA's, so many to choose from there. But they do work better with Squonk Mods (they have a liquid feed bottle that when squeezed forces liquid up into the RDA and vacuum sucks back the excess), otherwise you have to drip liquid into the RDA and this can get messy quickly.
And as for wire, Stainless Steel is good due to its ability to be run in TC or Wattage modes. Simple round wire is good to simple complex coils such as Claptons (thinner wire wrapped around a thicker wire, look similar to an electric guitar string).
Here's a link for a good Clapton wire, FYI.
Spooled Clapton Wire 316L SS (26g/30g or 28g/36g)
For an RTA, the Coppervape Hussar Project X is probably one of the most easiest to work with.
Here's the thread link for more information.
Hussar Project X RTA Clone (by Coppervape)
And RDA's or Drippers are really easier to work with than RTA's, so many to choose from there. But they do work better with Squonk Mods (they have a liquid feed bottle that when squeezed forces liquid up into the RDA and vacuum sucks back the excess), otherwise you have to drip liquid into the RDA and this can get messy quickly.
And as for wire, Stainless Steel is good due to its ability to be run in TC or Wattage modes. Simple round wire is good to simple complex coils such as Claptons (thinner wire wrapped around a thicker wire, look similar to an electric guitar string).
Here's a link for a good Clapton wire, FYI.
Spooled Clapton Wire 316L SS (26g/30g or 28g/36g)
I didnt mean to suck super hard - just a degree or 2 more than you were. And no doubt you'll find a smooth happy medium
So can I try different coils for my pod system or do i need a new mod? Im not really familiar with what an RBA is and ECT
@DRB92, you can use lots of different atomisers or tanks with your Snowwolf mod. It has a Female 510 connector and atomisers or tanks have a Male 510 connector, so you can mix and match.
And RBA means Rebuildable Atomiser, there's 2 different types RTA's (Rebuildable Tank Atomisers) and RDA's (Rebuildable Dripping Atomisers).
RTA's are like a tank and RDA's are very different but are easier to work with than RTA's due to the fact that they cannot suffer airlocking (vacuum forms in tank and pressure cannot equalize, then liquid cannot wick and you end up either toasting to burning your wicking), but to get the best experience with an RDA you're best using them with a Squonk mod.
And a Squonk mod is a specially designed mod that has a liquid feed bottle that when you squeeze, forces liquid up through a special 510 connector (has a hole in centre pin for the liquid to pass through).
And ask away, it's how we learn new things. And there's no stupid questions, unless it's can I run my 0.1 ohm atomiser using an 18650 cell, the answer is no and most importantly it's stupid and dangerous.
And RBA means Rebuildable Atomiser, there's 2 different types RTA's (Rebuildable Tank Atomisers) and RDA's (Rebuildable Dripping Atomisers).
RTA's are like a tank and RDA's are very different but are easier to work with than RTA's due to the fact that they cannot suffer airlocking (vacuum forms in tank and pressure cannot equalize, then liquid cannot wick and you end up either toasting to burning your wicking), but to get the best experience with an RDA you're best using them with a Squonk mod.
And a Squonk mod is a specially designed mod that has a liquid feed bottle that when you squeeze, forces liquid up through a special 510 connector (has a hole in centre pin for the liquid to pass through).
And ask away, it's how we learn new things. And there's no stupid questions, unless it's can I run my 0.1 ohm atomiser using an 18650 cell, the answer is no and most importantly it's stupid and dangerous.
Awesome thank you. So does the RDA have less problems with leakage? What tank would you recommend for this mod that I could use a .4 -.5 coil? Is there tanks that only open on the top instead of both top and bottom? One of the reasons I bought the wocket is there was no leakage problems but I suppose a .4 coil in a wocket wouldn't work?
@DRB92, easy option is probably going to be one of those Vaporesso Skrr-S tanks. With the 0.5 ohm GT CCell coils it's nice, flavour with clouds.
The Coppervape Hussar Project X is something worth considering, as no need to change your Snowwolf mod. But you have to learn how to wrap a coil and then wick it, it's sounds a lot more daunting than it actually is in real life.
The same goes for RDA's, in that you have to learn to build. But with your Snowwolf, you would have to drip liquid into one.
A Squonk mod would get round this and would be another investment, and there's loads of cheap clone RDA's around (all if not most of the fun, but for a fraction of the price).
The Coppervape Hussar Project X is something worth considering, as no need to change your Snowwolf mod. But you have to learn how to wrap a coil and then wick it, it's sounds a lot more daunting than it actually is in real life.
The same goes for RDA's, in that you have to learn to build. But with your Snowwolf, you would have to drip liquid into one.
A Squonk mod would get round this and would be another investment, and there's loads of cheap clone RDA's around (all if not most of the fun, but for a fraction of the price).
Thank you all for all your help. I got a tank that came with a .4 coil and absolutely love it. The flavor is fantastic, getting throat hit and not havong problems with leakage so far! Gonna keep my wocket as im also understanding how to inhale it properly. Thanks for all the feedback
- Status
Similar threads
