new UFS leaking with photoes

[uryong]

I posted before.

I already bought steel UFS connector.

New one works well.

e-cigz `s friend told mt that he will contact to imeo.


I found with the juice control fully closed there is liquid getting into my all atty.

I examined the point where the base cup meets the atty when the juice control is fully closed

and I noticed there's some problems, a small crevice between atty and base cup .

I think the size of bridges are little bit different and make it crevice

and the atomizer is not straight when screwing with UFS connector.

One of them is very thin. The others are fat....Photo #4

You can find some crevice between the atty and the base cup.


1. the gap upper UFS ans 510 atomizer




2 and 3 . leaking liquid in the atomizer despite if fully closing all









4. the upper bridge is thinner. and screw thread is not straight!!!!!!!!!!!!!

 

[imeothanasis]

Hi my friend ury

What do you mean by saying: "the upper bridge is thinner. and screw thread is not straight" What is the upper bridge and witch screw thread is not straight?

 

[imeothanasis]

Also, can you please send me back your UFS to examine it? If its not ok I will replace it of course

 

[Zoranth]

Imeo, I see the problem and it is with the Connector portion. The crenelations are not the same thickness and the hole appears to be off center causing the atomizer to be misaligned with the tank.

 

[imeothanasis]

I dont think this is a problem Zor. The hole is straight but the channel isnt because tool cut more surface from one side. But this doesnt affect the way atomizer sits on the hole. I still want to have this unit back to me to check if it really leaks. I say this because I receive e-mails that people insist that something is wrong with UFS but after my explanations it looks like UFS doesnt work because they cant make it work and not because UFS is faulty. One person insist that connector was faulty because it had no threads on the top of it.
I dont mean something about ury but I want to see the unit. Maybe he is right but maybe not.

 

[silentt]

Yeah there could be something wrong but before I bought a GG I always read this: This is an advanced user device.

When I first started using it I would flood it or not get enough juice and I thought it wasn't working right. Then after weeks of really studying it I could vape it perfectly and it is one of my favorite tank systems ever.

 

[blackwater]

It's frustrating to say the least until you get it down. I still have troubles some times but I always say to myself " take it apart, clean and lube and start from scratch". Not saying that your UFS isn't messed up just that it's a hard device to "get down" ya know.

Chris

 

[wigglr]

Everybody seems to flood their UFSs. It is almost impossible for me to flood mine haha.

Today I was filling up the UFS, and I left the juice control COMPLETELY open while pouring in juice... got NONE in the atomizer.

 

[Major]

Yeah there could be something wrong but before I bought a GG I always read this: This is an advanced user device.

When I first started using it I would flood it or not get enough juice and I thought it wasn't working right. Then after weeks of really studying it I could vape it perfectly and it is one of my favorite tank systems ever.

Right on brother SIlent! I read long and hard that statement before buying my first GG. In fact it is what led me to the Family here. Yes there are deviations in some tolerances that are common to all machined pieces but there are also O-rings to account for this.

Doesn't mean every piece is always going to work right every time but flexibility is the key. GG isn't USB. USB is plug "n" play, GG is advanced user devices. No offense to anyone with valid issues. Just sayin' though that that's why we're getting the videos and pictures reorganized for easier search and locate.

It isn't hard to become an "advanced user" but you do have to know going in that it will take some "omg's" and "oh ***ts" before you get comfy with each device.

 

[barman_dani]

I dont think this is a problem Zor. The hole is straight but the channel isnt because tool cut more surface from one side. But this doesnt affect the way atomizer sits on the hole. I still want to have this unit back to me to check if it really leaks. I say this because I receive e-mails that people insist that something is wrong with UFS but after my explanations it looks like UFS doesnt work because they cant make it work and not because UFS is faulty. One person insist that connector was faulty because it had no threads on the top of it.
I dont mean something about ury but I want to see the unit. Maybe he is right but maybe not.

Hi

I have to admit that I have nagging Imeo with the same situation during the weekend, and I have to be fair, although the cut was off center giving the impression that can be the problem to some leaking, with a little of patience to realize how it works the problem of leaking ends and we can enjoy the ggts and the ufs at is top.... with all the assembly and disassembly of the ufs to take pictures to send to Imeo finally I understand how it works and how I should handle the ufs to make it work.

Regards
Daniel

 

[bpaulette]

...the problem of leaking diapers...

Who doesn't hate leaking diapers? As a father of 2, I feel ya.

 

[barman_dani]

Ok sorry about the mistake, english is not my native language...

 

[bpaulette]

No offense intended! Your English is superb, especially compared to my Portugese!!!

I just saw "diapers", and couldn't resist.

 

[barman_dani]

non taken! We are all family... GG family

 

[utal]

Great Daniel! Another PT guy here, cool

Algarve rules

Hi

I have to admit that I have nagging Imeo with the same situation during the weekend, and I have to be fair, although the cut was off center giving the impression that can be the problem to some leaking, with a little of patience to realize how it works the problem of leaking ends and we can enjoy the ggts and the ufs at is top.... with all the assembly and disassembly of the ufs to take pictures to send to Imeo finally I understand how it works and how I should handle the ufs to make it work.

Regards
Daniel

 

[imeothanasis]

Small cap plays a very big role on flooding guys. If you screw it hard then there is no flooding at all. But as I see it only very few people understand this. So for the guys that have overflooding, tight the cap. For the guys with opossite issue, dont tight the cap

Everybody seems to flood their UFSs. It is almost impossible for me to flood mine haha.

Today I was filling up the UFS, and I left the juice control COMPLETELY open while pouring in juice... got NONE in the atomizer.

 

[imeothanasis]

yes, we are barman. The best of the world!

non taken! We are all family... GG family

 

[uryong]

This is right....

 

[uryong]

I dont think this is a problem Zor. The hole is straight but the channel isnt because tool cut more surface from one side. But this doesnt affect the way atomizer sits on the hole. I still want to have this unit back to me to check if it really leaks. I say this because I receive e-mails that people insist that something is wrong with UFS but after my explanations it looks like UFS doesnt work because they cant make it work and not because UFS is faulty. One person insist that connector was faulty because it had no threads on the top of it.
I dont mean something about ury but I want to see the unit. Maybe he is right but maybe not.

Above all, I love your GG, I`m GG familly. I was in greece during 1 weeks during my honeymoon trip. So I`m late to reply.

Anyway, Zoranth is right.... Imeo. I`m not good at english , so I`ll show show What I draw. And I`ll send it back to you. Let me know your address please. My e-mail is oryo@naver.com.

 

[dspin]

Well after all this, me thinks I should try out my new UFS instead of letting it sit around.