New Vs Old Atomizers

Status
Not open for further replies.

bewzer

Super Member
ECF Veteran
Jul 23, 2009
349
3
Everett, Wa.
mine leaks a bit too when on its side but i wasnt sure it was normal or not since its my first ecig...seems to preform well and all but i guess i can try some old and not improved attys...other than that its been a great purchase except i dont think i did a good job picking the regular ECOpure, should have picked the "Rich" lol
 
T

Topher

Guest
I've been using the 510 w/ new attys from Innovapor for over a week now (first e-cig, first time user) and have honestly detected no leaking or ill-fitting carts. Granted, the carts don't "snap" into place but they aren't just falling off, either. The only "leakage" I've seen has been around the top of the cart and where it marries up with the inside of the atty tube (looks almost like condensation) but it has never found its way outside of the assembled e-cig--regardless of how I lay it down.

The only thing I have to compare the 510 atomizer with is the 306 atomizers I bought for dipping/dripping. In that comparison, I'm getting much better results dripping on the new 510 than I am on the 306.
 

halopunker

Unregistered Supplier
ECF Veteran
Dec 31, 2008
2,446
183
New Philadelphia, OH
You know...The more I read about these, the more I doubt these are Joye's. There have been two clones of the 510 that have recently been created by other companies. One replica is made by the same company that creates the J118 (someone asked if the 'J' standed for Joye...I doubt it).

Can anyone show pictures of the 'new' carts, and people are saying these ones came from east mall. Has anyone received the 'new' ones from innovapor?
 

UptownRiot

Super Member
ECF Veteran
Jun 28, 2009
734
0
Jacksonville, FL
what other atomizers work with the 510 other than the blu cig ones because there 9.99 for 2 on blu cig website i tried them and there not as good

Buy your 510 parts from a supplier other than Blucig, you will be much happier.

However, if I were you I would wait to buy any more attys until this "new" atty situation is straightened out and you know what you're getting and from whom.
 

V10Beast

Full Member
ECF Veteran
Jul 6, 2009
38
0
California
Can you get some pics for us all?


Eastmall FLAT Carts. They work really well and fit well with the "old" atty's. But does not fit well with their own "new" ones.
 

Attachments

  • IMG00166-20090723-1318.jpg
    IMG00166-20090723-1318.jpg
    20.7 KB · Views: 103
  • IMG00167-20090723-1318.jpg
    IMG00167-20090723-1318.jpg
    20.6 KB · Views: 89
  • IMG00169-20090723-1319.jpg
    IMG00169-20090723-1319.jpg
    19.4 KB · Views: 98
Last edited:

RsL

Super Member
ECF Veteran
Apr 18, 2009
755
2
Minneapolis
You know...The more I read about these, the more I doubt these are Joye's. There have been two clones of the 510 that have recently been created by other companies. One replica is made by the same company that creates the J118 (someone asked if the 'J' standed for Joye...I doubt it).

Ah, ha! I know who makes the J118 so I went to their website and sure enough, they are selling a JSB-510. I wonder if this is what Eastmall & IV are selling ??

JSB-510 Manual switch Manufacturer exporting direct from Guangdong China
 

halopunker

Unregistered Supplier
ECF Veteran
Dec 31, 2008
2,446
183
New Philadelphia, OH
Ah, ha! I know who makes the J118 so I went to their website and sure enough, they are selling a JSB-510. I wonder if this is what Eastmall & IV are selling ??

JSB-510 Manual switch Manufacturer exporting direct from Guangdong China


Summary of what I just posted in my thread in my forum :p

Facts:
-Joye has stated they have not changed the atomizer recently.
-Rep has posted 'They get theirs from Eastmall'
-Eastmall does change certain models of other ecigs for other companies in the USA.

Speculation:
Eastmall sells a clone of the 510, if this is the case I would ask that IV change the name of the model to something else. I.E: Litecigusa.net sells the JSB-510, and calls it the 510A. Why would this be necessary? Awhile ago, people were selling the RN4075 as the DSE901...this caused a lot of confusion, especially when the two producers of the units started not to be so...compatible. It caused a lot of time answering the same question from people demanding refunds and telling me how I sell FAKE DSE901's. Especially when I sold SLB's, which are true DSE901's.

This is my only concern, whether or not these are TRULY better is another story all together. It just makes me worry, because I've already read how some of the 'new' atomizers carts don't work with the old ones, or vice versa. Just my concern :p
 

bewzer

Super Member
ECF Veteran
Jul 23, 2009
349
3
Everett, Wa.
It just makes me worry, because I've already read how some of the 'new' atomizers carts don't work with the old ones, or vice versa. Just my concern :p


I'm a total noob, but from what I understand is there are new attys but no new carts to fit them...so the carts fit the best with the "old" attys but not the "new" attys. Supposedly there are new carts that are supposed to fit the new attys that will be available soon.
 

markarich159

Ultra Member
ECF Veteran
Jun 30, 2009
1,169
45
PA, USA
I'm a total noob, but from what I understand is there are new attys but no new carts to fit them...so the carts fit the best with the "old" attys but not the "new" attys. Supposedly there are new carts that are supposed to fit the new attys that will be available soon.
the reason the old carts don't fit the New atty's is that the New atty's are NOT genuine JOYETECH atomizers. I was communicating with a friend who was communicating with Lina(she's the assistant marketing rep at JOYETECH) and they have no idea what these "new 30K hit atomizers" are. They have made no redesign to their 510 series atomizer. This should lead any logical person to the questions. How can you claim to be making a genuine SUPERIOR JOYE 510 atomizer if your company has nothing to do with the actual innovator product?? If I was Joyetech I would be .......
 
Status
Not open for further replies.

Users who are viewing this thread