Nicoticket Family Virtual Vapemeet and eLiquid Support Group v.2.0

Status
Not open for further replies.

glowplug

Vaping Master
ECF Veteran
Verified Member
Jul 1, 2013
4,220
26,897
Lakewood, CO USA
My eyes must be blurry because I can't see the blurry LOL. Lets see, it is probably 28g, about 6 wraps, not touching deck or side, I didn't know if I had enough cotton so I am glad to learn it is ok, it was wrapped on Danny's 'jiggernaut' and I didn't squeeze it cause it looked really good before I mounted it. I will squeeze it.

I am testing on my mods: ZMax (no groans or jokes folks!) and my MVP2. I am guessing that it won't read cause it is below the 1.2 cut off. Since this set up looks OK, I am going to do more wraps and try again. Sad. I have two beautiful coils that Danny sent and I can't use them til I get a mech. I will save them and love them and pet them and call them George 1 and George 2.
 

ScandaLeX

ECF Guru
ECF Veteran
Verified Member
Aug 6, 2013
12,893
58,154
PhiLLy
Hey, my Trident clone has o-rings that are CRAZY tight, and they dont seem to be loosening. Lubin them up all nice and good doesnt seem to help much either.

SOL, or do I need to find smaller orings from some hardware shop?

How often do you think you need to remove the barrel? I like mine super tight. Too many RBAs with too loose a fitting.

Sent from a BIG phone.....Galaxy Note 3
 

gotalotgoingon

Ultra Member
ECF Veteran
Verified Member
Mar 22, 2013
2,069
12,040
Nebraska/Dutch Harbor, AK
Don't forget calling every team they play "has-beens" who "just got lucky that game." Some of my friends from when I lived in Oregon are Seahawks fans and whenever they post about football on Facebook, I have to restrain myself. Especially when they start talking about the Niners and Super Bowls...

I have friends and ex co workers from in and around Seattle. On facebook, I have to hear about how great they are when they win and how bad the refs were when they lose. I have bitten my lip on more then one occasion but after tomorrow, I will sound off in huge rejoice all over facebook that Seattle sucks!!!!!!!

Ya I'm way behind. Lol. Had joined and been cruisin the calivapers forum. They come off like a bunch of elitist. But there's some hard core techies in there. Different world over there. Lol

Gota did you get your flat bottom to the ELA? Mine came yesterday. So for my $400 I now have in my hands a flat piece of metal. Oh and a washer. I feel relieved. :what:

Yes, I got mine Thursday. I haven't used it since I got it but I can say that you can sit in down without it tipping over and the button recedes enough that it won't fire under its own weight.

Hey, don't be bashing Pittsburgh ;)

Clark and I are both long time, and very loyal Steeler's fans so there was no bashing there!!
 
Last edited:

JohnWillyson

Super Member
ECF Veteran
Verified Member
Dec 18, 2011
523
2,032
Texas
How often do you think you need to remove the barrel? I like mine super tight. Too many RBAs with too loose a fitting.

Sent from a BIG phone.....Galaxy Note 3

The barrel isnt that much of a problem, but the airflow is basically unajustable without pulling it all apart.

I love this compared to my nimbus and patriot, but the big problem is closing it up is very VERY difficult and I dont want to damage my mvp :(
 

Mark Howard

Unregistered Supplier
ECF Veteran
Nov 11, 2013
1,627
8,833
www.dreadysmodspa.com
Hey, my Trident clone has o-rings that are CRAZY tight, and they dont seem to be loosening. Lubin them up all nice and good doesnt seem to help much either.

SOL, or do I need to find smaller orings from some hardware shop?

I've heard people say they've removed one of the o-rings and it works just fine. Mines a few months old now and has definitely loosed up quite a bit. I always use a small flat screwdriver on one edge & twist to start it, then i can pull it off from there.
 

NakiFantaki

Ultra Member
ECF Veteran
Verified Member
Mar 11, 2013
2,727
17,648
40
Las Vegas NV
Slowtech. I figured for the price I may as well grab 2.
I'm so ready to build one now but I still have too many lil people running around.
It's funny how 4 yr olds get tired of each other- the rate they tattle increases.

Well if you end up hating them, ill buy one from ya!

Sent from my HTC VLE_U using Tapatalk
 

NakiFantaki

Ultra Member
ECF Veteran
Verified Member
Mar 11, 2013
2,727
17,648
40
Las Vegas NV
OK, Megan and the rest of you coil builders: give me some feedback on this setup. The cotton went in very smoothly, so if anything, I have too little in there I would think. It is all moot since I can't get it to read, but I would like to know if it looks good enough to repeat with some more wraps next time.
View attachment 296412

That looks great glow!

Sent from my HTC VLE_U using Tapatalk
 

BlackChad

Senior Member
ECF Veteran
Verified Member
Feb 4, 2011
245
308
Back In Mesa
Hey, my Trident clone has o-rings that are CRAZY tight, and they dont seem to be loosening. Lubin them up all nice and good doesnt seem to help much either.

SOL, or do I need to find smaller orings from some hardware shop?

Did you try vaseline? Never fails for me

Sent from my SGH-T889 using Tapatalk
 

gjustin79

Coil Destroyer
ECF Veteran
Verified Member
Oct 10, 2013
1,608
12,274
Oceanside, CA, USA
Alright Lex, your pic pushed me over the edge..Ultrasonic cleaner ordered, delivery Tuesday. Now I don't have to be nearly as patient waiting for all the new jooce! Thanks :)

A ultrasonic can't do anything my hands can't do. I'm good with my hands.... Um in regards to shaking bottles I mean :D
 

Shane Bappe

Ultra Member
ECF Veteran
Verified Member
Sep 11, 2013
2,660
21,878
42
Cozad, Nebraska, United States
Hey, my Trident clone has o-rings that are CRAZY tight, and they dont seem to be loosening. Lubin them up all nice and good doesnt seem to help much either.

SOL, or do I need to find smaller orings from some hardware shop?

I took one off the top and one off the bottom.

Sent from my DROID RAZR using Tapatalk
 

Seanchai

Ultra Member
ECF Veteran
Verified Member
Oct 1, 2013
1,587
11,650
44
Georgia, USA
Vapemail's here! Virus fresh out of the mail - not bad, but it'd only be an occasional vape for me in this form... it's got that slightly fruity note that a lot of tobacco vapes have when they're fresh for me. That said, I can already tell that this is something different, and that if I let it sit for a month or so, it might become one of the few tobacco flavors I keep in my stash. We shall see.
 

ScandaLeX

ECF Guru
ECF Veteran
Verified Member
Aug 6, 2013
12,893
58,154
PhiLLy
The barrel isnt that much of a problem, but the airflow is basically unajustable without pulling it all apart.

I love this compared to my nimbus and patriot, but the big problem is closing it up is very VERY difficult and I dont want to damage my mvp :(

Gotcha!!!!

Sent from a BIG phone.....Galaxy Note 3
 
Status
Not open for further replies.

Users who are viewing this thread