NotCigs refugee thread
- Thread starter FranC
- Start date
- th_trl_thread_readers 0
- Status
We went from short sleeves yesterday to fireplace this morning lol. Going to be a chilly week with some wind and rain.
Morning folks 
This snow is wet and heavy, hard to tell how much since I haven't been outside yet. Looks like about 4" so far, and supposed to snow the rest of the day. Maybe instead of a snowman, I'll build a big middle finger for Punxsutawney Phil the groundhog!
This snow is wet and heavy, hard to tell how much since I haven't been outside yet. Looks like about 4" so far, and supposed to snow the rest of the day. Maybe instead of a snowman, I'll build a big middle finger for Punxsutawney Phil the groundhog!
Top of the morning !! Yeah....I've been up for over an hour!!!!!!
The karma train has made a stop at station El Dee.......Ya'll know I keep an eye on the Craigslist....For a couple of years now I've been stalking a plasma cutter for the shop....Couple weeks back I traveled too Smithfield to view a coupe on auction....Compromise at best....I didn't place a bid...I searched the entire Southeast.....All compromises and overpriced.....Hypertherm out of new Hampshire is known as the industry leader....their Powermax 45 would do everything I needed and more.....Right now there are two up for bid on the Bay....both used and one at 1750 with the other at 1350....both with time left on the auction......With the 45 out of my reach new unless I wanted to be broke I decided on purchasing the Powermax 30....It should be OK but I'd always wish it were a 45.....I'd already gotten the local B&M to meet the webs price and had added the cash to my pocket when all Hell broke loose in that ice storm.....Knowing there would be no need until I was finished with my new chores the B&M trip was solidly on the back burner....Then yesterday I was killing time as it was raining cats and dogs....I plugged my usual in the Craigs search and saw a post from a couple weeks back....It said only "Used Tools" no mention of a plasma cutter...I hit on it and dang if there wasn't a 45 listed...Pic after pic of sockets and such but no pic of the 45....You got a diamond in a goat's azz and no pic ???????? I called....he had it....he wanted an offer....I came in low....he said that would get it....he seemed rather slow with his speech and I suspected "pill head".....So I threw Spike a treat as he doesn't ride into the unknown...and trust I often venture into the unknown....I jacked one into the chamber and made damn sure the magazine was ready to go and off into the storm I went.....I dug through all the tools he had.....Restrained myself from buying stuff I already had.....Scored a set of Mac ball end allen sockets with both metric and standards in a nice case and valued at 229 and that 45.....I left 8 Benjamins there....no shell casings.....Got the 45 home and it operates most excellent....Stoked about that!!!!!! Now if anyone knows where I can find a tubing bender I'm game!!!!!!!! I got sheet that needs building.....
Watch as I venture into the grocery here in a minute with Mom's list....This might take a minute as I'll be all over that store numerous times looking for sheet i don't normally purchase.....Then it's limbs and mud....plenty of both!!
The karma train has made a stop at station El Dee.......Ya'll know I keep an eye on the Craigslist....For a couple of years now I've been stalking a plasma cutter for the shop....Couple weeks back I traveled too Smithfield to view a coupe on auction....Compromise at best....I didn't place a bid...I searched the entire Southeast.....All compromises and overpriced.....Hypertherm out of new Hampshire is known as the industry leader....their Powermax 45 would do everything I needed and more.....Right now there are two up for bid on the Bay....both used and one at 1750 with the other at 1350....both with time left on the auction......With the 45 out of my reach new unless I wanted to be broke I decided on purchasing the Powermax 30....It should be OK but I'd always wish it were a 45.....I'd already gotten the local B&M to meet the webs price and had added the cash to my pocket when all Hell broke loose in that ice storm.....Knowing there would be no need until I was finished with my new chores the B&M trip was solidly on the back burner....Then yesterday I was killing time as it was raining cats and dogs....I plugged my usual in the Craigs search and saw a post from a couple weeks back....It said only "Used Tools" no mention of a plasma cutter...I hit on it and dang if there wasn't a 45 listed...Pic after pic of sockets and such but no pic of the 45....You got a diamond in a goat's azz and no pic ???????? I called....he had it....he wanted an offer....I came in low....he said that would get it....he seemed rather slow with his speech and I suspected "pill head".....So I threw Spike a treat as he doesn't ride into the unknown...and trust I often venture into the unknown....I jacked one into the chamber and made damn sure the magazine was ready to go and off into the storm I went.....I dug through all the tools he had.....Restrained myself from buying stuff I already had.....Scored a set of Mac ball end allen sockets with both metric and standards in a nice case and valued at 229 and that 45.....I left 8 Benjamins there....no shell casings.....Got the 45 home and it operates most excellent....Stoked about that!!!!!! Now if anyone knows where I can find a tubing bender I'm game!!!!!!!! I got sheet that needs building.....
Watch as I venture into the grocery here in a minute with Mom's list....This might take a minute as I'll be all over that store numerous times looking for sheet i don't normally purchase.....Then it's limbs and mud....plenty of both!!
That's great Dee!! Patience and karma...love it!
Still snowing like a MF'r, Katie crawling up my azz (no diamond for me) to get out there and start digging out! Newp, told her I'm not doing an all day shift. When it quits snowing, I'll get busy but not before then. She got the hots because one of the neighbors was snow blowing their driveway, and guess what? It's already buried again.
Still snowing like a MF'r, Katie crawling up my azz (no diamond for me) to get out there and start digging out! Newp, told her I'm not doing an all day shift. When it quits snowing, I'll get busy but not before then. She got the hots because one of the neighbors was snow blowing their driveway, and guess what? It's already buried again.
If your thinking of Altus better jump 89.99 w/ altusvapingcheap code $30 off list. I'll be waiting though.
Altus Tank Atomizer, a Coil-Less tank by Guo Vape
Altus Tank Atomizer, a Coil-Less tank by Guo Vape
I had that email this morning Moon, nice price
Dee, I need to go around behind he shed and hit one with you! Sheet on a ft of wet, heavy snow. My back, hips, and shoulders are very unhappy right now.
Dee, I need to go around behind he shed and hit one with you! Sheet on a ft of wet, heavy snow. My back, hips, and shoulders are very unhappy right now.
We got 2 inches and it stopped. Sun's out now.
I saw that too, Moon. I am more inclined to wait for the Dolphin to be back in stock. Still kicking myself for not pulling the trigger before it went OOS. I know of 2 people using them that say they are the bomb. I am still LOVING the cCell coils that I have.
I am using a small tank because all I have that is compatible with the cCell is the Atlantis. I let the darn thing run dry 4 times now. YUCK! But, filled back up and it is just like new. No lingering burnt or foul taste at all. Love it! I did order a few of the larger Atlantis tanks for the ones that I have during a 60% off sale. Now if they would just get here already.
I can only imagine all that snow......My azz would be South bound lickity split......
Trust all I've heard is beeching about the power and A/V cord on Mom's new TV...So after I got her groceries I ran those "offensive bass turds" inside the dang wall....I had 'em tied neatly together and even hid behind a vase....Ohhhh noooooo....BiL suggested some kind of conduit....Hell the wires look better...Just like those chrome covers on H-Ds...I hate covers......especially chrome covers....I ran a couple three errands and scored some cash....then I sawed up the split half of a tree from the storm and hauled it way on up the hill and into the woods...Got the neighbor's creek free from limbs and got all the limbs from Mom's side of the creek....My side has been limb bombed and is still untouched....I'm off till Monday....fekk it
Trust all I've heard is beeching about the power and A/V cord on Mom's new TV...So after I got her groceries I ran those "offensive bass turds" inside the dang wall....I had 'em tied neatly together and even hid behind a vase....Ohhhh noooooo....BiL suggested some kind of conduit....Hell the wires look better...Just like those chrome covers on H-Ds...I hate covers......especially chrome covers....I ran a couple three errands and scored some cash....then I sawed up the split half of a tree from the storm and hauled it way on up the hill and into the woods...Got the neighbor's creek free from limbs and got all the limbs from Mom's side of the creek....My side has been limb bombed and is still untouched....I'm off till Monday....fekk it
Damn, LD. Wish I had 1/4 of your energy. I would have said fekk it long before you ever did.
Hope you let BIL put those wires in the conduit
Hope you let BIL put those wires in the conduit
Good morning everyone!
I gotta say that I love the taste difference with those c cell ceramic coils....so much so that I might just have to get me one! I am hesitant bc I really do not need another single battery device.
Can grab the whole kit for around $76 before shipping at vapenw. The tank only for 30 something. Decisions decisions?!?!?!
I've been wanting a tank with coils for the less fiddling, and tried several which are now either rehomed (gifted) or sitting! This could be a winner for sure.
Salem, is there a noticeable difference in juice consumption?
We have a birthday party this afternoon. My best friends granddaughter is turning 4. Will be fun for Madison, and I'll get to catch up with the bestie!
Have a great day all!
P.s.- HAPPY BIRTHDAY ELDEE!!!!!
I hope your day is fantastic and you eat lots of cake!
P.s.s- All my appliances cords are just hanging neatly zip tied too! No conduit needed!
I gotta say that I love the taste difference with those c cell ceramic coils....so much so that I might just have to get me one! I am hesitant bc I really do not need another single battery device.
Can grab the whole kit for around $76 before shipping at vapenw. The tank only for 30 something. Decisions decisions?!?!?!
I've been wanting a tank with coils for the less fiddling, and tried several which are now either rehomed (gifted) or sitting! This could be a winner for sure.
Salem, is there a noticeable difference in juice consumption?
We have a birthday party this afternoon. My best friends granddaughter is turning 4. Will be fun for Madison, and I'll get to catch up with the bestie!
Have a great day all!
P.s.- HAPPY BIRTHDAY ELDEE!!!!!
I hope your day is fantastic and you eat lots of cake!
P.s.s- All my appliances cords are just hanging neatly zip tied too! No conduit needed!
Happy Birthday,Dee
Good morning,Tracy
Good morning,Tracy
- Status
