The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

Nuppin'

Discussion in 'Reos Mods' started by Spydro, Nov 2, 2014.

Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. SteamStack

    SteamStack Ultra Member Verified Member ECF Veteran

    Aug 7, 2014
    Macomb, MI, USA
    I've read that if the side screws are too long they will catch the lid hense why I bought short ones for that. I believe 2.5mm and 3mm tall is what I bought about 6 months ago or so.

    3mm was ss and the 2.5mm was just steel screws.

    Just guessing.. but you've read it from the source so whatever.
     
  2. muzichead

    muzichead Resident Knucklehead Verified Member ECF Veteran

    Feb 7, 2011
    Illinois
    The screws I linked are what Peter designed the Nuppin' to use and as I pointed out the link came from his thread... No guessing at all...

    pdib LIBRARY: tech/specs/info
     
  3. SteamStack

    SteamStack Ultra Member Verified Member ECF Veteran

    Aug 7, 2014
    Macomb, MI, USA
    Finally checked.. yeah the 2.5mm height is right for the nuppin.

    Getting the screws mixed up as I bought 2 different sizes also for the cyclones 3mm and 4mm where the shorter 3mm is nicer and not as long as the 4mm they provide and don't stick out the top as far on the posts.
     
  4. SteamStack

    SteamStack Ultra Member Verified Member ECF Veteran

    Aug 7, 2014
    Macomb, MI, USA
    Guessing to what I bought not what it uses as I bought multiple sizes.
     
  5. SteamStack

    SteamStack Ultra Member Verified Member ECF Veteran

    Aug 7, 2014
    Macomb, MI, USA
    Anyone got any nuppin question by all means ask muzichead.. excuse me.
     
    • Like Like x 1
  6. FatBill

    FatBill Super Member Verified Member ECF Veteran

    Jan 11, 2011
    CT
  7. The.Drifter

    The.Drifter Ultra Member ECF Veteran

    Nov 20, 2013
    Virginia
    There's Nuppin on my CC :D

    [​IMG]
     
    • Like Like x 10
  8. Spydro

    Spydro Sindoyen Verified Member ECF Veteran

    Apr 20, 2013
    Spylandia
    Sum Nuppin on sumpin too, but wun's on sumpin else Reo an wun's in reserve fur now (tryin out a Magma w/Clapton build un the vein).

    [​IMG]
     
    • Like Like x 6
  9. Rossum

    Rossum Squonk Mod Junkie Verified Member ECF Veteran

    Supporting member
    Dec 14, 2013
    SE PA
    Dang, that's a whole lotta nuppin! :w00t:
     
    • Like Like x 4
  10. muzichead

    muzichead Resident Knucklehead Verified Member ECF Veteran

    Feb 7, 2011
    Illinois
    WOW... Thats going out there just a little too far and it would seem I've hurt someones feelings!!! Wasn't my intention to do so... Was merely trying to correct the mis-information you were giving.

    I personally know what it was like to purchase spare parts for something ecig related at the behest of someone that thought they were giving the correct recommendation at the time, only to find out that it was incorrect and money spent that I couldn't get back. One of my biggest annoyances since I started vaping 5yrs ago. Just trying to save someone else the headache of ordering the wrong parts and having to do it twice over to get it right...
     
    • Like Like x 4
  11. FatBill

    FatBill Super Member Verified Member ECF Veteran

    Jan 11, 2011
    CT
    Got em today Muzic…back to duals (new ones o course) Thanks
    Bout 8 wraps of 27 gauge kanthal 2.0 mm bout .5 ohms
    Can I ask ya what is your preferred build on the nuppin?
    OR Anyone please feel free to chime in…….
     
  12. Train2

    Train2 ECF Guru Verified Member ECF Veteran

    May 11, 2013
    CA, USA
    I'm right about there with ya - but more like 6 wraps, 27 ga. I think mine are 2.5mm inner. And I land at 0.4 to 0.5.

    I've tried it with one twisted coil, kind of looped over the middle - it was interesting, but not better for me, so I'm back to my usual. Picture just cuz it's different.
    twisty2.JPG


     
    • Like Like x 3
  13. muzichead

    muzichead Resident Knucklehead Verified Member ECF Veteran

    Feb 7, 2011
    Illinois
    I don't have any pics handy, but what I have my 2 setup with are 26ga Ni80 6 wrap 2.5mm duals @ .3Ω roughly, wicked w/ 3mm RxW... Not too warm, not too cool...
     
    • Like Like x 1
  14. Spydro

    Spydro Sindoyen Verified Member ECF Veteran

    Apr 20, 2013
    Spylandia
    I've done all kinds of builds on my Nuppin's... with K1, Ni80, ribbon, 2x/3x twisted, Clapton in various gauges; single, dual, std HC parallel, mixed gauge HC parallel, etc; mostly using 3mm RxW or Scottish Pulled 'N' Rolled wicks. My favorite for flavor rich vapor are the high center parallel builds with SR or RxW, followed by a dual something with a 3mm form for SR cotton or RxW.

    I've only taken one Nuppin' build picture, of one of my V2's on a 2015 Woodvil. This high center std parallel is 27 K1, 2.5mm form that nets .6 for the joose it runs with a pulled 'n' rolled cotton wick. Don't try to run one even close to this high without measuring everything exact with a dial caliper. Just high enough to barely clear the positive post grub is way safer without some tricks I figured out with mine (and esp with the V2's "floating chamber size" like this one is).

    Somewhere in this thread I wrote about all the skeletons in this closet, and how I safely got around them. I don't know how far back, probably late summer/early fall last year. Good idea to find/read it beforehand.

    [​IMG]
     
    • Like Like x 3
  15. Train2

    Train2 ECF Guru Verified Member ECF Veteran

    May 11, 2013
    CA, USA
    Found a new Nuppin-worthy drip tip!

    It's a bit wider bore than a Loki - kind opens up the draw a little - might be my new favorite!
    Don't think I've seen them around so happy to give props - superfast delivery in a nifty jar with a gift enclosed, too. I got black Delrin and SS, and there's a cool "blood orange" color as well.
    From "Vinyl by SJ".

    sjtip2.jpg
     
    • Like Like x 9
  16. Spydro

    Spydro Sindoyen Verified Member ECF Veteran

    Apr 20, 2013
    Spylandia
    Nice to have another option Train2. I'm going to stay with the Syner's as my favs though (and do have Routers on two of them).
     
  17. The.Drifter

    The.Drifter Ultra Member ECF Veteran

    Nov 20, 2013
    Virginia
    Finally made myself a new brass drip tip to go on my Brass Nuppin :)

    [​IMG]
     
    • Like Like x 16
  18. Papa_Lazarou

    Papa_Lazarou MKUltra Member Verified Member ECF Veteran

    Supporting member
    That looks like an Iron Man suit prototype.
     
    • Like Like x 3
  19. The.Drifter

    The.Drifter Ultra Member ECF Veteran

    Nov 20, 2013
    Virginia
    Hey now, that's a actually a great idea :)

    Ironman Red accent pieces would indeed look pretty cool with the brass :D
    I do have a couple of raw aluminum top caps, maybe our anodizer could match that color.

    Worth a call tomorrow......
     
    • Like Like x 3
  20. The.Drifter

    The.Drifter Ultra Member ECF Veteran

    Nov 20, 2013
    Virginia
    @beckdg inspired me on another thread about friction fit wide bore drip tips for the Nuppins so I had a little time to play around and make one ;)

    This is what I came up with, made this one out of Ultem so you can see thru it :
    [​IMG]

    Mounted on the Nuppin :D
    [​IMG]

    For a comfortable friction fit, the OD of the flange is 8.6mm:
    [​IMG]

    The ID is 7.25mm:
    [​IMG]

    So that leave about .675mm wall thickness or about 0.025 inches.
    Just about as thin as I'm comfortable making it without being fragile.

    Bottom View:
    [​IMG]

    Top View:
    [​IMG]

    Massive increase in airflow and plenty of room for my top mounted coil builds on my Nuppin :D
     
    • Like Like x 10

Share This Page