OBS Crius RTA?
- Thread starter Hightech Redneck
- Start date
- th_trl_thread_readers 0
- Status
So basically where the deck is removed? I have had a touch of juice there after a rewick. If that's the case check the seal where they meet I would guess.
It could also be when you turned the jcf you may have loosened the deck from the tank a little. It has happened to me the last time I filled my tank and there was a slight amount of juice where you are talking about. Next time you have to turn off the juice flow, turn it clockwise so the deck doesn't get loose off the tank.
Sent from my HTC One_M8 using Tapatalk
I think so, too. The deck isn't screwed in all the way. Its a bit of a booger.
What size diameter coils are you guys using?? I've tried 24 gauge 2.5 mm in there but it can't keep up. I want to try 3 mm and wanted to see if anyone's been successful.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I've got 26g 3mm in mine right now, looks like it should have enough room for 24g, 22maybe, but that would be getting tight.
24g 3mm id working ok , cant get it to wick as fast as i want but it does work
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Using 26 gauge 2.5 mm stainless steel coils. Working great so far.
Sent from my HTC One_M8 using Tapatalk
Sent from my HTC One_M8 using Tapatalk
I'm struggling as well. The first time I ran it, it was beautiful, now I can't seem to get it to keep up.
Sent from my iPhone using Tapatalk
I think I have around 10 wraps at 0.38 ohms. Vaping at 35-40 watts depending on the juice I'm using.
Maybe a little bit too much wick in the pockets, it does not take much, I've had no issues with wicking keeping up so far.
Are you using that with temperature control?
Also, is anyone else using the Crius with NiFe or even just nickel or titanium? I generally run temperature control, so the last check mark the Crius needs for me to go for it is working well with temperature control coils. Alternatively, I was thinking of just buying some 22 gauge kanthal if that would work as a back up. Hoping for big power with the latter set up unless you all think 32/28 or 32/26 clapton 2.5 would fit and would be better for big power? Haven't built anything but RDAs before.
I'm not using temp control at the moment. My mod doesn't do temp control for ss. I'm waiting for my DNA 200 mod to come. I pre-ordered the Whithout DNA 200. Been waiting for a while for this mod. It's finally in production and hopefully should get it by Christmas.
I had the same issue and someone up thread mentioned they tightened the screw in the 510 connection/center post and it worked great!
No more leaky leaky
Does anyone have a successful high wattage build they would like to share??
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I've been using this in mine and like it a lot 2.5mm bit Dual 24ga 7 wraps 0.3Ω's
But get ready because it's a juice guzzler
But get ready because it's a juice guzzler
- Status
