Odysseus Illustrations
- Thread starter Para
- Start date
- th_trl_thread_readers 0
- Status
Roflmao Para, I am working on them. Haven't even had a chance to actually put the parts together and try it
Yes Zor has spoiled us with his artwork or certainly has me at least! Even with the good videos, I will feel more comfortable when I have your drawings to have for reference Zor! 
Yea this is so true! Zoranth's work means a lot to all of us!Yes Zor has spoiled us with his artwork or certainly has me at least! Even with the good videos, I will feel more comfortable when I have your drawings to have for reference Zor!
I'm not taking anything out of their bags until I know what goes where.I still haven't seen all the parts yet!!!
By any chance, does anyone know where the smallest O-ring goes? Its the super tiny one thatt was in the bag with the dripping atty items.
I already tore the small O-ring trying to get it over one of the post. Dang It...
I already tore the small O-ring trying to get it over one of the post. Dang It...
Last edited:
Sorry folks, but it all takes time. I also had to take the time to figure out where everything went 
. So, while I am working on these without using them, you folks enjoy what you have working so far and I will get the illustrations out soon
I have just now finished creating the 3D Models of each part. I now have to create each specific Assembly then from there, create the exploded assembly drawings.
. So, while I am working on these without using them, you folks enjoy what you have working so far and I will get the illustrations out soon I have just now finished creating the 3D Models of each part. I now have to create each specific Assembly then from there, create the exploded assembly drawings.
Sorry folks, but it all takes time. I also had to take the time to figure out where everything went
I have just now finished creating the 3D Models of each part. I now have to create each specific Assembly then from there, create the exploded assembly drawings.
No hurry....take your time. I hate to admit it but I'm pretty much lost.
I appreciate that....but it doesn't matter to me; you do the work so you pick which one.
Thanks
I can't wait for Zors work
I'm already confused with all these parts lol
I'm trying to set up 510 atty/carto mode tonight
Agreed Zor's illistrations have been lifesavers for me in the past. I think I got most of the ody stuff figgured out except my newest o-ring question.
By Imeo::
tiny o-ring is the same as the tiny o-ring between ceramic housing and center pin and it goes on the small channel at the end of the center pin but ONLY on UFS mode fright
Originally Posted by fright88
Ok I re-watched all the videos but I can't for the life of me figgure out what the tiny o-ring is for any ideas I will list what I know for reference.
2 o-rings on the clear window
1 o-ring around the dripping mode base
1 o-ring is for when using e2 cartos to cover the holes
1 o-ring in the 510 atomizer mouthpiece (this one had be bumfuzzled for a while kept wondering what the small threaded ring was lol)
The final o-ring is smaller then everything else. Thanks for any
I don't even try stuff until I see the illustrations, its almost like having someone walk me through it.........
I too check Zor's designs when I forget what goes where lol. Thank you very much Zor for the extremely good and extremely useful work you do for GG line buddy
I took over a desk in the back of a car dealership I was working at. I opened up the bags of my expansion kit and laid it all out in front of me. I moved my small mode cylinder tank wall out of the way, and assembled big mode but forgot I moved the top cyclinder wall out of the way.
I was going nuts, I was like I'm missing a part? Then I looked under paper towels, nope and right before i was about to start going back to small mode I looked over and saw the missing piece! Rocking big mode
I was going to post and request videos last night. That one bag with the ring, base leg and coil threads is intimidating... I left it alone.
I was going nuts, I was like I'm missing a part? Then I looked under paper towels, nope and right before i was about to start going back to small mode I looked over and saw the missing piece! Rocking big mode
I was going to post and request videos last night. That one bag with the ring, base leg and coil threads is intimidating... I left it alone.
I am getting there. Here are the Assembly Models for: Odysseus (Short Mode), Odysseus (Short Mode - GGTS Base), Odysseus (Full Mode), Odysseus (Full Mode - GGTS Base) and Odysseus (Dripping Mode).
I still need to do Assembly models for: Odysseus (UFS Mode), Odysseus (510 Atomizer Mode), Odysseus (E2 Mode). Will also need to model an E2 basic carto for use in the E2 mode.
You may notice that there is an O-Ring above the cone of the mouthpiece in the "Short Mode - GGTS Base" and above the shoulder on the mouthpiece in the "Full Mode - GGTS Base". That is a 9 x 2mm and is needed from my experience to prevent the cone from completely unscrewing from the ceramic housing when using the GGTS Base. This is due to the ceramic housing screwing further into the base than the normal 510 base.
Odysseus (Short Mode)
Odysseus (Short Mode - GGTS Base)
Odysseus (Full Mode)
Odysseus (Full Mode - GGTS Base)
Odysseus (Dripping Mode)
I still need to do Assembly models for: Odysseus (UFS Mode), Odysseus (510 Atomizer Mode), Odysseus (E2 Mode). Will also need to model an E2 basic carto for use in the E2 mode.
You may notice that there is an O-Ring above the cone of the mouthpiece in the "Short Mode - GGTS Base" and above the shoulder on the mouthpiece in the "Full Mode - GGTS Base". That is a 9 x 2mm and is needed from my experience to prevent the cone from completely unscrewing from the ceramic housing when using the GGTS Base. This is due to the ceramic housing screwing further into the base than the normal 510 base.
Odysseus (Short Mode)
Odysseus (Short Mode - GGTS Base)
Odysseus (Full Mode)
Odysseus (Full Mode - GGTS Base)
Odysseus (Dripping Mode)
Last edited:
- Status
