OFFICIAL AvidVaper.com HH.357 discussion thread

[rasci2]

I haven't been on in a few days and sadly I must report that my HH357 crashed literally. I dropped my REO and as faith would have it, it landed on the atomizer. When I picked it up the HH357 was bent and I tried to straighten it. It seem to be working but was badly floorded when I took off the drip tip the entire 510 stainless cylinder came off. Tried in my feeble way to fix it but when put together it did not work.

 

[santo19586]

damn thats awfull, i feel for ya

 

[santo19586]

the sealed one was a vaping machine from the beginning while the opened one was harsh for like half a day and it still doesn't hit an produce as much as the sealed. It vapes somehow like a regular cisco. the inside material seems different also. more fluffy and less metallic and allows it to retain many more drops than the sealed one does.
Im gonna soak/clean it on Sunday and try it out on other devices (haven't metered it yet or tried it in my provari or VVmonkyboxx).

yes i agree, i have a sealed center post and seem to get better taste and performance with it, the open pin seems to be a bit harsh and longer to break in, and by the way the cloed pin that i have is a leaker and it still vapes better

 

[santo19586]

avid vaper , got them in stock again....

 

[santo19586]

yes i agree, i have a sealed center post and seem to get better taste and performance with it, the open pin seems to be a bit harsh and longer to break in, and by the way the cloed pin that i have is a leaker and it still vapes better

i spoke too soon ,,sry.. sealed center post atty , needs a bath........

 

[unsure]

More on sale now!

 

[santo19586]

this .357 atty now has been perfomin great, it is brokin in good, no problems with being harsh anymore...
was at a BBQ last night and was able to put 2 .357 atty's an a double head Silver Bullet, thats 2 atty's at one time vaping, and there was more vapor production than Kevin's smoke from his grillin hamburgers,, it was awsome, couldnt do that for too long though, it made me somewhat dizzy,,wooohooo! love it

 

[MagnusEunson]

No, not where I'm at. When I get back from travels I'll grab the DMM and check it. -Magnus

I'm back home.. it's ohming out at 1.3ohm. I threw it in a P16 w/ a 3.2v battery and it vapes just fine so it must've been the switch protection kicking in on my Vv box. It was 1.5ohm the day I got it though so that's a extremely rapid drop.

I'm sending it off to Hanna just to check for anything else per their request.

Hanna, I have ~no~ expectation for you to replace it. Just sending it for an engineering once-over per Sean's PMs. I'll order another when the resistance options expand into my more normal range. -Magnus

 

[6pointprime]

this .357 atty now has been perfomin great, it is brokin in good, no problems with being harsh anymore...
was at a BBQ last night and was able to put 2 .357 atty's an a double head Silver Bullet, thats 2 atty's at one time vaping, and there was more vapor production than Kevin's smoke from his grillin hamburgers,, it was awsome, couldnt do that for too long though, it made me somewhat dizzy,,wooohooo! love it

I saw that!!! I think you are the first to double barrel the .357 like that! Nice meeting you yesterday, good times sir!

 

[MagnusEunson]

I didn't even realize H-Bomb's status was changed to unregistered supplier... in this case I guess meaning he just has to go through the formal process. Not that he did anything wrong to be demoted. He was just a regular user account. -Magnus

 

[santo19586]

yeah, and hasnt been the supplier, he just makes them , avid vaper supply's them, go figure

 

[Cisco]

I didn't even realize H-Bomb's status was changed to unregistered supplier... in this case I guess meaning he just has to go through the formal process. Not that he did anything wrong to be demoted. He was just a regular user account. -Magnus

Hanna was required to register as a manufacturer/supply per a PM. He filled out an application/ information form and was asked to pay a fee for the right to post on the forum as a registered manufacturer/Supplier. Until that is settled any new posts from him will be removed or deleted. The reason he has not been posting here lately.


Cisco...

 

[jonny2hottie]

that kinda sux...

::waiting for hi-res 357's::

 

[Vaporologist]

Hanna was required to register as a manufacturer/supply per a PM. He filled out an application/ information form and was asked to pay a fee for the right to post on the forum as a registered manufacturer/Supplier. Until that is settled any new posts from him will be removed or deleted. The reason he has not been posting here lately.


Cisco...

Well, raise the price of the atty by a buck so that the man can talk to us...

 

[Abubika]

Testing completed on the higher res. Attys, coming soon!!

 

[voxlet]

Testing completed on the higher res. Attys, coming soon!!

My stalking days of avidvaper will then recommence...

Can you tell us if the first batch will include 1.8 ohm? Definitely my sweet spot on 3.7v.

 

[gjrhine]

What is the consensus for best voltage on the 357 with a regulated mod and IMR batteries?

Also the optimum number of typical size drops to add?

 

[laurel099]

I use mine on Darwin at 8.3-8.5 watts which is 3.3 or 3.4 volts. I add 3 drops at a time after atty is in use and already been wet.


Mine are still kicking strong. I was rotating between cleanings two but saw my sister this weekend and had to share the love!

She loved it! I am still loving mine

 

[santo19586]

@ cisco,, are the hh.357 going up on site today ?

 

[rj1]

Just an update on my HH357! Ive had it now since aug 2nd going on 16days and its still performing really good. Now ive cleaned it out twice of pure grain alcohol and let it soak for an hour or so and then blow it out. After that it performs the way it did brand new! Very happy with it so far...