OFFICIAL AvidVaper.com HH.357 discussion thread

[H_Bomb]

talk to us about storing. You mentioned never letting them get dry. Why is this? How should we store them?

Maybe time for video number 2. the advanced version.

From what I hear, you should have your wife do it. I am just repeating what I hear

I will work on this!

If you let them dry out it will take longer to get the lower filler to absorb juice and the atty might dry fire, taste bad or burn out faster than expected.

Like when you first put water on a dry sponge and it beads off.

 

[juicejunky]

I'll never get by the tampering exclusion-that's a tough one.

What an efficient way to soak the atty in Everclear, KEITH97M3. Thanks for the tip. It'll work particularly well with long barrels. I waste a lot covering it in my small plastic cups.

 

[pmoraldo]

Does anyone know if the 2.5ohm HH357 will stand up to 6 volt vaping??

running my 2.5 at 5 & 6v no problem

 

[bowhunterr2001]

I am running 3 ohm at 6.4 volts and its working very well..

Sent from my DROID RAZR using Tapatalk

 

[H_Bomb]

i am also using 2.5 at 6 volts using pg vg blend.

 

[bowhunterr2001]

I am using 100% vg.. AVE gorilla juice.. I still need to get my hands on a couple of these in SS for my other mods..

Sent from my DROID RAZR using Tapatalk

 

[AZCraig]

I am really liking my HH.357 Long Barrel 2.0 ohm atomizer now. I'm running Ms. T's Banana Foster's Coffee w/Cream in it on my Provari at 4.1 volts. It tastes better than in my Boge 3.0 cartos @ 5.7 volts. I'm not a huge fan of dripping, but this flavor makes it worth it.

FWIW, I did end up using a 510 to 510 Ego adapter cause of the threading issues I had, but the short barrel HH.357 threads fine on my Provari w/no adapter.

Awesome atomizer and worth every penny to "wake up" juices that otherwise would have sat unused on my shelf !

 

[Chasbo]

I have a 2.0. Bought it for a reo and had a problem with threading. Did not think to use an adapter. Used it on provari and a GLV. Big fast hit on both. Used it solid for 2 weeks only blowing it out every couple of days. The ohms dropped to 1.6 and got an error 1. Gave it a good cleaning and fresh prime. Works like new - ohms back to 1.8.

Have a 3.0 on the way.

Going to try an adapter on the reo.

 

[bowhunterr2001]

I am using the 3 ohm on my Reo Grand and there were no threading issues at all.. I have been using it for 8 days now and this is by far the best atty that I have ever used..

 

[hildicat]

So I broke down an ordered another 357 2.0 ohm short standard 510. From what I remember before my last one gave out, it was definitely on my short list of favorites. I have not used my new one yet and wanted to ask what I should/could do to make sure this one lasts me longer than my previous one. Specifically, how should I store it for the night. In the past I used to leave it on the device I was using (ego battery to start, then Reo Grand) and just drop in a couple of drops of the juice I was using before going to bed for the night. Then in the morning I would just fire it up and vape away. Recently, I have begun taking my atty's off my Grand each night and capping the battery side with a carto cap. My plan for the 357 is to remove it each night, cap the battery end, drop in maybe a single drop of unflavored, no nic VG, then capping the top.
Does this sound reasonable? Overkill?
What are your daily/nightly rituals, if any, with your 357's?

 

[bowhunterr2001]

I just leave mine on my Reo Grand, I squonk before I go to bed that way it won't dry up over night.. No problems as of yet..

 

[H_Bomb]

i usually drop mine in a small cup of iso and let soak for 10 min or so then take out, blow it out, and put a few drops of w.e. juice i use in it. It really does come down to how clean your juice is though. The juice I use leaves virtually no residue on the coil even after months of vaping. when i used to use dark or some organic juices my atty lifespan was much shorter.

 

[the ob]

I am still trying to figure out where people get 99% iso. I cant seem to find it anywhere I can only find 91% at the most, so I use everclear mostly as it is 95%. I wonder in the extra 4% makes some difference.

 

[Kalimero]

I use 100% VG juices and I use my Magnums in pairs. I usually let the one I´m not using soak over night then take it out, blow it out, and put a few drops of the juice I´m using in it. Sometimes I´ll put it after soaking to my ultrasonic jewelry cleaner if I think I´m seeing any residue on the coil. I´ll do this every 2-3 days.

On a daily basis I just blow it dry and prime it again and it´s like new.

 

[Mudflap]

I am still trying to figure out where people get 99% iso. I cant seem to find it anywhere I can only find 91% at the most, so I use everclear mostly as it is 95%. I wonder in the extra 4% makes some difference.

Mine is Good Neighbor Pharmacy brand. I see three stores located near Portland. Enter your Zip code and check them out.

 

[the ob]

Mine is Good Neighbor Pharmacy brand. I see three stores located near Portland. Enter your Zip code and check them out.

Do you find this works better than the 91%? Much better?

 

[Mudflap]

Do you find this works better than the 91%? Much better?

I find that I'm not worrying about what the other 9% might be doing to my attys.

99% evaporates very fast.

 

[darco]

Hi I just tried my first HH.357 Long barrel 1.5ohm atty with my Reo. I screwed it in, squonked a few times to make sure juice goes in, and hit it. The result was a complete dry burn with a glowing orange coil! Tried squonking more, and sucking in the juice without hitting, but still the same. Then I dripped from the top end to ensure the coil gets wet and had vapor. However the vapor is way hotter than the other Avidvapor Cisco spec 1.5 ohm 510 attys or even the 306. So worrying about killing my first HH.357 prematurely, I got it off and switched back to the Cisco spec 510s which have been working well until now.

What am I doing wrong? Is the HH.357 not feeding well in the Reo? Is the vape usually a lot hotter with these attys than with the other brands?

 

[Mudflap]

darco, the HH .357 holds a lot of juice in the mesh, so I'd suggest you drip several more drops into it and give it a few minutes to soak in. Then you can use your Reo to feed it more juice as needed.

 

[H_Bomb]

Hi I just tried my first HH.357 Long barrel 1.5ohm atty with my Reo. I screwed it in, squonked a few times to make sure juice goes in, and hit it. The result was a complete dry burn with a glowing orange coil! Tried squonking more, and sucking in the juice without hitting, but still the same. Then I dripped from the top end to ensure the coil gets wet and had vapor. However the vapor is way hotter than the other Avidvapor Cisco spec 1.5 ohm 510 attys or even the 306. So worrying about killing my first HH.357 prematurely, I got it off and switched back to the Cisco spec 510s which have been working well until now.

What am I doing wrong? Is the HH.357 not feeding well in the Reo? Is the vape usually a lot hotter with these attys than with the other brands?

Just keep putting juice in drop by drop and taking short hits until you get flavor to come back, then once you are getting some flavor take off the atty blow it out and add 6 or 7 drops until it gurgles. Then vape and get back to us.