OFFICIAL AvidVaper.com HH.357 discussion thread
- Thread starter Cisco
- Start date
- th_trl_thread_readers 0
- Status
the difference in the 901 is the airflow and distance of the coil to the top of the atomizer, when compared to the long barrel its a little closer to you but not close enough to spit at you.
What i would like to do is get some tubes cut for a middle man of the short and long barrel in a 510 version but right now the 901 is the middle man.
What i would like to do is get some tubes cut for a middle man of the short and long barrel in a 510 version but right now the 901 is the middle man.
Oh by the way we have moved to Orleans Cape Cod, MA. If any one is close and would like to visit feel free to give me a shout!
Terrific vapemail day today. I've almost pulled the trigger on a HH 357 probably a dozen times over the past few months. Today I got in an empire mod and a nice shiny new HH 357 901 to use with the empire's native 901 connection. Love it so far!
Any plans on making some higher resistance 901's? I also have an Infinity Pro with a 901 top cap, and would love to have a 2.5 ohm HH 357 on there as well.
Any plans on making some higher resistance 901's? I also have an Infinity Pro with a 901 top cap, and would love to have a 2.5 ohm HH 357 on there as well.
whatever you guys want....what other resistances would you guys want to see in a 901? Maybe 2.0 2.5 and 3.0??
Congrats on the new goodies!
Congrats on the new goodies!
My just received HH.357 Long Barrel 510 won't thread on my Provari ! It threads fine on an Ego battery, but not the Provari !
Argh !
Argh !
I've had that problem before, and it's usually due to the Provari's threads being so tight. I always turn it slightly back and fourth (similar to using a tap if you've ever tapped anything) and they always work their way in. I tap holes every day at work though so if you aren't comfortable, I'm not suggesting you try it. The threads on the HH should give long before the Provari's though.
Depart USPS Sort Facility, January 14, 2012, SAN JOSE, CA 95101
Processed through USPS Sort Facility, January 14, 2012, 1:01 am, SAN JOSE, CA 95101
Processed through USPS Sort Facility, January 13, 2012, 7:07 pm, SAN FRANCISCO, CA 94188
Depart USPS Sort Facility, January 12, 2012, MELVILLE, NY 11747
Processed at USPS Origin Sort Facility, January 11, 2012, 10:11 pm, MELVILLE, NY 11747
Accepted at USPS Origin Sort Facility, January 11, 2012, 8:56 pm, WESTBURY, NY 11590
Shipment Accepted, January 11, 2012, 5:23 pm, WESTBURY, NY 11590
Electronic Shipping Info Received, January 11, 2012
The USPS workers need to be drug tested. All my previous shippments went from MELVILLE, NY to Stockton, Ca then to my local post office. Sheeeesh.
Processed through USPS Sort Facility, January 14, 2012, 1:01 am, SAN JOSE, CA 95101
Processed through USPS Sort Facility, January 13, 2012, 7:07 pm, SAN FRANCISCO, CA 94188
Depart USPS Sort Facility, January 12, 2012, MELVILLE, NY 11747
Processed at USPS Origin Sort Facility, January 11, 2012, 10:11 pm, MELVILLE, NY 11747
Accepted at USPS Origin Sort Facility, January 11, 2012, 8:56 pm, WESTBURY, NY 11590
Shipment Accepted, January 11, 2012, 5:23 pm, WESTBURY, NY 11590
Electronic Shipping Info Received, January 11, 2012
The USPS workers need to be drug tested. All my previous shippments went from MELVILLE, NY to Stockton, Ca then to my local post office. Sheeeesh.
I finally pulled the trigger and ordered a 3ohm matte black for my black grand.. I'd like to get a 3ohm SS for my other grand if they ever get into stock..
tell you what I just pulled the trigger on a 2.5ohm and a 3.0 ohm and all I do is 5 & 6v on my Reos so soon as they get here we shall see!!!
I too was wanting the SS 3.0ohm which is why I also purchased the 2.5ohm
I'm trying the "back and forth" method you've suggested, but so far only minimal progress. What's weird is the HH.357 510 Short Barrel threads just fine.
I'd definitely pick up a 2.5.
Question about the long barrel - are these long enough to use a dripshield without a 510-510 extender? If so - sign me up for a 2.5 and a 3.0 ohm!
Barely, it won´t blow if you keep it wet meaning almost flooded, I don´t like, too hot. But I have a friend who likes it. He prefers tobacco flavors and a puts the throat hit first as I prefer taste. So try but BE CAREFUL, IMHO, good luck.
PS: I would go with 3.0 ohm ones
Last edited:
What i would like to do is get some tubes cut for a middle man of the short and long barrel in a 510 version but right now the 901 is the middle man.
As the Man stated there they´re longer than 901s. Yes they are long enough.
2.5 will scream at 6 volt but NOT with an all or high VG juice unless it has the consistency of PG. The thicker VG juices simply cant wick fast enough to keep up with the 2.5 at 6v and it WILL taste burnt and kill the atty pretty quick. I actually use a 2.5 at 6 with a 80/20 and it rips! Mke sure you keep it wet...a 2 second dry pull at 6v will kill it.
I ended up going with the 3 ohm in matte black, but I need a couple in stainless.. hint hint..
Sent from my DROID RAZR using Tapatalk
Sent from my DROID RAZR using Tapatalk
- Status
Similar threads
- Locked
