yeah sorry I ran out of stainless tubes and fell behind with the move but cisco just got something in the mail...hint hint
OFFICIAL AvidVaper.com HH.357 discussion thread
- Thread starter Cisco
- Start date
- th_trl_thread_readers 0
- Status
My HHs decided to take the scenic route with a few lay overs....
Absolutely no blame to Avid but USPS seriously needs a revamping.
Maybe tuesday...
Detailed Results:
Arrival at Post Office, January 16, 2012, 1:23 pm, OAKDALE, CA 95361
Depart USPS Sort Facility, January 16, 2012, STOCKTON, CA 95213
Processed through USPS Sort Facility, January 16, 2012, 1:26 am, STOCKTON, CA 95213
Depart USPS Sort Facility, January 14, 2012, SAN JOSE, CA 95101
Processed through USPS Sort Facility, January 14, 2012, 1:01 am, SAN JOSE, CA 95101
Processed through USPS Sort Facility, January 13, 2012, 7:07 pm, SAN FRANCISCO, CA 94188
Depart USPS Sort Facility, January 12, 2012, MELVILLE, NY 11747
Processed at USPS Origin Sort Facility, January 11, 2012, 10:11 pm, MELVILLE, NY 11747
Accepted at USPS Origin Sort Facility, January 11, 2012, 8:56 pm, WESTBURY, NY 11590
Shipment Accepted, January 11, 2012, 5:23 pm, WESTBURY, NY 11590
Electronic Shipping Info Received, January 11, 2012
Absolutely no blame to Avid but USPS seriously needs a revamping.
Maybe tuesday...Detailed Results:
Arrival at Post Office, January 16, 2012, 1:23 pm, OAKDALE, CA 95361
Depart USPS Sort Facility, January 16, 2012, STOCKTON, CA 95213
Processed through USPS Sort Facility, January 16, 2012, 1:26 am, STOCKTON, CA 95213
Depart USPS Sort Facility, January 14, 2012, SAN JOSE, CA 95101
Processed through USPS Sort Facility, January 14, 2012, 1:01 am, SAN JOSE, CA 95101
Processed through USPS Sort Facility, January 13, 2012, 7:07 pm, SAN FRANCISCO, CA 94188
Depart USPS Sort Facility, January 12, 2012, MELVILLE, NY 11747
Processed at USPS Origin Sort Facility, January 11, 2012, 10:11 pm, MELVILLE, NY 11747
Accepted at USPS Origin Sort Facility, January 11, 2012, 8:56 pm, WESTBURY, NY 11590
Shipment Accepted, January 11, 2012, 5:23 pm, WESTBURY, NY 11590
Electronic Shipping Info Received, January 11, 2012
I've been using an HH .357 1.5 ohms on my Reo Grand for almost 2 months at 3.7v it has been amazing for the most part. I'm noticing now that when it gets really hot during chain vaping the vapor drops off even if its fully wet. I can get vapor but no vapor comes out on the exhale and its got a very different throat hit. Anyone else notice this?
Aha! Physics at work lol the hotter the juice the faster the particles move because they store heat energy. Then they are heated more by the coil and the particles disperse into the air, which depending on the temperature of the air will start to slow down and group together (visible vapor) the more heat energy they store the harder it is to slow them down and the more difficult to group together and form vapor.
So all in all the amount of vapor is effected by either the temperature of the juice pre coil or the ambient air temp. If you had a vv device and actually turned DOWN the voltage when this was happening you would get more vapor.
I am no expert so please correct me if I'm off lol
So all in all the amount of vapor is effected by either the temperature of the juice pre coil or the ambient air temp. If you had a vv device and actually turned DOWN the voltage when this was happening you would get more vapor.
I am no expert so please correct me if I'm off lol
Last edited:
Ok guys, I read enough info and finally pulled the trigger today on 3 HH.357 atties in (1.5ohm long barrel), 2.0 and 2.5ohms in the short. We will see just how good they are and I will follow the maintenance instructions to a T. Will be using them on my Precious-LV2 and my Reo Grand so I look forward to seeing what I was supposedly missing.
I will be back after trying them out thoroughly with a short review here and a really long one on Nu-Vapor.
Aloha, Keith
I will be back after trying them out thoroughly with a short review here and a really long one on Nu-Vapor.
Aloha, Keith
I have noticed a difference in your last batch H. I got one back in September and it is still working fine. I picked up two at Vaporcon and I love them. I just got two more for backup's in the mail day before yesterday. The 2.5 that I am testing out is very much like a 306, more-so than my last 3. Are you changing how they are made?
I know it is more a personal preference but I like the old way better. This is not to say I do not like the new one. Flavor and vapor is amazing, I just wish it was more 510ish.
I know it is more a personal preference but I like the old way better. This is not to say I do not like the new one. Flavor and vapor is amazing, I just wish it was more 510ish.
Even though I try to stay as consistant as possible, I'm sure a few have slipped through that may be slightly off but I have not changed the way they are made, so with that said shoot me a pm and let me know what seems different as in draw, vapor flavor or all of the above and we will figure something out for you. If it comes down to it I can rebuild it for you taking care in getting it the way you prefer. hope this is ok.
H_Bomb,
I really hope the ones I ordered yesterday are not going to be like a 306. I already have a bunch of those and despise the vape and taste.
Hi H_bomb
I have a 2.0 ohm that has never worked right. I get tons of vapor but zero flavor or warmth no matter what the voltage. The atty gets really hot as does the delrin drip tip yet the vapor stays ice cold. Wierd. Would this be able to be looked at or repaired?
I have a 2.0 ohm that has never worked right. I get tons of vapor but zero flavor or warmth no matter what the voltage. The atty gets really hot as does the delrin drip tip yet the vapor stays ice cold. Wierd. Would this be able to be looked at or repaired?
Absolutely guys anyone having an issue can request a rebuild if after inspection it is determined there was a defect. I DO NOT mind doing this. I want to make sure every atty purchased is working at top notch. You pay the money, you get a good product and service.
ok i saw your new video , and i cant even check the homs of a hh.357 1.5 atty on the provari , it goes to e1, could there be wick touching coil wire?, the setting on provari is 3.3. and even tried 4.1 and no go
i'm useing a drip shield, because i cant keep enough juice in the 1.5 atty long enough to vape it, once it is primed up and ready to vape , i pull on it and get hot fire hit, so i add 2 more drops and it runs out,at least with the drip shield i can pull juice up from it , then its workin ok.
they work, but i rather it to work not needing a dripshield to catch the escaping eliguid,
I was considering one, but I think I will wait a bit longer. I believe they need some more R&D. (Research and Development)
Last edited:
- Status
Similar threads
- Locked
