OFFICIAL AvidVaper.com HH.357 discussion thread

[KEITH97M3]

Thank you Keith. I am not about to give up on it, to be fair i think the vapour production is slowly increasing. I will come back with details in a few days, it's unlikely for a lot of people to love them with no good reason.

Matrixxu, I forgot to tell mention that if you live near Mark78, ask him to try some of his Boba's Bounty in your HH.357. I sent him some a few weeks ago and tracking shows that it is already in Romania. Just don't tell him I told you he has some, he might not want to share but he will have a lot.

 

[misplacedsooner]

no worries guys. i was skeptical too when i received 2 357s at 1.5..... the first one spit at me like a camel but was great when it didnt. the 2nd for some reason didnt spit hardly at all and was great til it decided to die out of the blue. i was directed to get ahold of hanna and will be sending it to him. i recently aquirred a 2.0 and it is rocking out of this world...im sold on these attys and they will be my go to attys.

 

[brian272465]

For people having problems with spitting from there 357s I have come to find out a drip tip with a wide whole in it stops the spitting .

Sent from my SPH-D700 using Tapatalk

I wanted to add the drip tip I'm using is the ones made for the dca it has a super wide hole

Sent from my SPH-D700 using Tapatalk

 

[KEITH97M3]

no worries guys. i was skeptical too when i received 2 357s at 1.5..... the first one spit at me like a camel but was great when it didnt. the 2nd for some reason didnt spit hardly at all and was great til it decided to die out of the blue. i was directed to get ahold of hanna and will be sending it to him. i recently aquirred a 2.0 and it is rocking out of this world...im sold on these attys and they will be my go to attys.

Hey Misplaced, howzit going man? It's me from Nu-Vapor.

You know before buying my atties, I had read about some people having a problem with the spitting so I decided to get one of the long barrels just in case. So far I have not experienced any spitting with the 1.5ohm and 2.0ohm using anywhere from 3-6 (loaded voltage) on my Precious-LV2. In fact, mine doesn't even make that crackly noise but makes a steady hissing buzzing sound instead. What I think the reason for this is, the juice doesn't puddle in the ceramic cup and instead drains down below the coil. Man I can't wait to dissect this thing after it dies but I hope that isn't for a long time more.

 

[vapure_ak]

Thank you Keith. I am not about to give up on it, to be fair i think the vapour production is slowly increasing. I will come back with details in a few days, it's unlikely for a lot of people to love them with no good reason.

Hey matrixxu,
I am glad that your atty is starting to pick up in vapor for you. I thought that it could be possible that it may just take some time to get going real good. I keep going and I hope it works out.
Later,
vapure_ak amanda

 

[H_Bomb]

Hey matrixxu,
I am glad that your atty is starting to pick up in vapor for you. I thought that it could be possible that it may just take some time to get going real good. I keep going and I hope it works out.
Later,
vapure_ak amanda

if it continues to perform below your satisfaction be sure and get in touch with me. I do hope however you get to experience the big thrill of a sudden break in lol

 

[H_Bomb]

i was using a 2.5 today and at 5.3v on the provari it really makes vapor FAST, does anyone else see this?

 

[mwa102464]

Uhm yaaaaa,,, 2.5ohm is a great place to be

 

[the ob]

i was using a 2.5 today and at 5.3v on the provari it really makes vapor FAST, does anyone else see this?

I do. I have one 2.5 and have been using it at roughly the same setting. Very nice.

 

[rustybikes]

So, I'm loving the HH.357 so much that I ordered up a small supply of them to have sufficient supply on-hand. I have the first one soaking in PGA and put a new one on my REO Mini (1.5Ω FYI). I know these things'll spit a little until they get broken in, so I can't say I'm shocked, but this one just spit in my eye. THE PAIN!!

No really.. I'll be okay...

 

[hildicat]

So, I'm loving the HH.357 so much that I ordered up a small supply of them to have sufficient supply on-hand. I have the first one soaking in PGA and put a new one on my REO Mini (1.5Ω FYI). I know these things'll spit a little until they get broken in, so I can't say I'm shocked, but this one just spit in my eye. THE PAIN!!

No really.. I'll be okay...

OUCH! Mine never spit once I spot dragging on them. I mean, it would only spit if I was actively taking a hit. Do you mean that it continued to spit once you removed it from your lips? (sorry for the awkward tone of this post...)

 

[the ob]

true story.

I was dry burning a atty, and a piece of gunk spit up off a coin and lodged itself in my cornea for about a hour.

It was super painful and I was freaking out. It finally came out. I could see it on there. It hurt like you know what.....

 

[rustybikes]

OUCH! Mine never spit once I spot dragging on them. I mean, it would only spit if I was actively taking a hit. Do you mean that it continued to spit once you removed it from your lips? (sorry for the awkward tone of this post...)

Nah, it was before my draw. My flow with vaping is to start the atty firing about a second or two before I put it to my lips. So, it was firing as I moved it toward my face. I'll have to be more careful to not let it point at my eye or something.

My first HH.357 spit a lot more than this one has (so far), and had me in nic-overdose state for much of the first 24 hours I had it. If this is the worst this one does, I'll still count it as an improvement.

Either way, I still love these things. They've become my go-to for atties any more.

Thank you H!!

 

[hildicat]

Either way, I still love these things. They've become my go-to for atties any more.

Thank you H!!

Couldn't agree more. I no longer feel the need to try another atty. That is until Hannah comes up with something else!

 

[H_Bomb]

Couldn't agree more. I no longer feel the need to try another atty. That is until Hannah comes up with something else!

the custom atty's are next, they really do have added performance if they are matched to the juice. I have been testing allot and the outcome is a very finely tuned atty, perfect for the type of juice used.

If any of you are familiar with carburetors and jetting, these atty's work very similar, where i am trying to control the juice and airflow to the coil and that changes depending on the blend of juice used.

 

[the ob]

the custom atty's are next, they really do have added performance if they are matched to the juice. I have been testing allot and the outcome is a very finely tuned atty, perfect for the type of juice used.

If any of you are familiar with carburetors and jetting, these atty's work very similar, where i am trying to control the juice and airflow to the coil and that changes depending on the blend of juice used.

i am hoping the tanks are next

 

[H_Bomb]

oh yes of course....i was just on the subject of atty's

 

[the ob]

oh yes of course....i was just on the subject of atty's

and I was just being a smart ... . sorry, I cannot stop.

 

[brian272465]

the custom atty's are next, they really do have added performance if they are matched to the juice. I have been testing allot and the outcome is a very finely tuned atty, perfect for the type of juice used.

If any of you are familiar with carburetors and jetting, these atty's work very similar, where i am trying to control the juice and airflow to the coil and that changes depending on the blend of juice used.

I would love one made for 100% vg

Sent from my SPH-D700 using Tapatalk

 

[H_Bomb]

and I was just being a smart ... . sorry, I cannot stop.

lol you bring great humor to this thread!