Official DiscountVapers.com Thread

[mohawkx]

can you explain more or reference this I'd love to learn about it.

Eric.
The main reason for falure of a cartomizer is the build up of caramelized juice and other contaminents around the coil. This results in major decrease of flavor, vapor and TH. Plus it is the major reason for the draw getting really tight after extended usage. With horizontal coil cartomizers the coil is seperate from the filler thereby allowing the filler material to be removed without destroying the electrical connection to the coil. Once the filler is removed, it can be cleaned and refreshed or replaced with new filler. The most important aspect of this is the fact that the coil can be dry burned, thereby removing all substance build up by burning it off and essentially making the carto perform as factory new again.
With vertical coil cartos the coil is integrel to the filler thereby preventing one from dismantling the carto and still maintaining the functioning integrity of the vertical coil system. The most you can do with a vertical coil carto is flush out the taste of the old juice but you cannot refresh the coil with a dry burn. You dry burn a vertical coil, you have a burnt taste forever and you might as well throw it away. With horizontal coils, dry burning is a normal process of refreshing the carto for reuse and can be done numerous times thereby extending the practical life of the cartomizer well beyond what the average vendor would like to see for his bottom line.
Hope this clarifies any misconceptions anyone has about the difference between the two systems.

I use in regular rotation a mix of resurrectors at 1.7, smoktek dual coils, and boge lr cartos. All of these are vertical coil cartos. They all perform well for a limited period of time and then I just throw them away. I've thrown away many dozens of each type.
On the other hand, I always have at least one or more gocarts working and have had them working in rotation since early march. I've only had 5 gocarts die on me since march. I've cleaned and refreshed dozens of them, some as many as 5 times. Gocarts are built like heavy duty work trucks.

 

[GoAskAl]

Looking at the pictures it doesn't look like the Go-go cone will work with these. Is this true??

Part 2 of 5 of the "Game Changers"

Introducing the first removable Go-go Battery..

Go-go Jumbo!
I am not actually sure if I can use this name, but we'll see how it goes.

Fits all Go-go cartos
Takes a removable 18650 battery up to 4000mAh
(3+ times the life of a standard Go-go battery)

I will have colors but not in this first run, I have to see how well this does and then expand into colors.
And as with all other products price may come down if this does well.
It is on the website now for pre-orders, should come in the same time as the new dual coil cartos.
Same deal, if you purchase this with other items, and the entire order will be held until it comes in.

Three other new items to come in the next month or so.

 

[Urge]

I have been trying to send a pm to another member who I have had an ongoing correspondence with but I got this message when trying to reply to him this morning.

.......has chosen not to receive private messages or may not be allowed to receive private messages. Therefore you may not send your message to him/her.

Why is this happening?

Urge

 

[GoodDog]

Urge, either the member has turned off their Private Messaging for one reason or another or they are "Suspended" or "Moved On". You can check their profile page and look above their avatar to see if they have "Moved On".

 

[Urge]

Their profile page says they have moved on but I don't believe it. This person makes and sells a mod and was pming me about more mods on Friday.

Urge

 

[toto1013]

Eric.
On the other hand, I always have at least one or more gocarts working and have had them working in rotation since early march. I've only had 5 gocarts die on me since march. I've cleaned and refreshed dozens of them, some as many as 5 times. Gocarts are built like heavy duty work trucks.

Same here mohawkx. I am still on my first box of GoGo cartos received in May. One died on me after couple of days of use; other than that I continue to use the other 4 utilizing your cleaning instructions which I really do not have to do all that often. they perform as good as new after cleaning. With regular cartos only lasting a few days, and with the method of cleaning for them never resulting in that good of a result or any lasting time frame.......

 

[gormly]

Chopper has been banned by ECF for violating their terms of service.

The told him that because he made items and actively promoted them in posts, in his profile and signature banner he would have to become a supplier to continue with ECF.

He needs $50.00 to become a supplier.
Normally I'd pay it but honestly I am tapped out with all the new products and bulk up of products.

I am not one to usually ask this kind of thing but if there are people out there willing to give him a few dollars to pay this fee, I am sure he would appreciate it. A buck or two from a handful will do. if you feel he has been an asset and you have a few dollars to spare, it might be worth getting him on board as a supplier. Then he could have his own threads etc...

He's had a LOT of bad luck recently and I believe he has given to this community.

The 50 dollars is a new fee and ironically I was the first to ever pay it. Well worth it for sure, but some people are just down on their luck. if you want to donate and do not know how to contact him or feel weird sending him some money, PM me and we can arrange something. We can keep it secret or not, whatever it takes to get him back on.

 

[gormly]

Eric.
The main reason for falure of a cartomizer is the build up of caramelized juice and other contaminents around the coil. This results in major decrease of flavor, vapor and TH. Plus it is the major reason for the draw getting really tight after extended usage. With horizontal coil cartomizers the coil is seperate from the filler thereby allowing the filler material to be removed without destroying the electrical connection to the coil. Once the filler is removed, it can be cleaned and refreshed or replaced with new filler. The most important aspect of this is the fact that the coil can be dry burned, thereby removing all substance build up by burning it off and essentially making the carto perform as factory new again.
With vertical coil cartos the coil is integrel to the filler thereby preventing one from dismantling the carto and still maintaining the functioning integrity of the vertical coil system. The most you can do with a vertical coil carto is flush out the taste of the old juice but you cannot refresh the coil with a dry burn. You dry burn a vertical coil, you have a burnt taste forever and you might as well throw it away. With horizontal coils, dry burning is a normal process of refreshing the carto for reuse and can be done numerous times thereby extending the practical life of the cartomizer well beyond what the average vendor would like to see for his bottom line.
Hope this clarifies any misconceptions anyone has about the difference between the two systems.

Thanks! I was under the wrong impression, I love you guys!

Looking at the pictures it doesn't look like the Go-go cone will work with these. Is this true??

Unfortunately that is true for the first run, when I saw them the first time it slipped my notice but then I did notice and it was to into production to stop it.

 

[Briachas]

Chopper has been banned by ECF for violating their terms of service.

The told him that because he made items and actively promoted them in posts, in his profile and signature banner he would have to become a supplier to continue with ECF.

He needs $50.00 to become a supplier.




Normally I'd pay it but honestly I am tapped out with all the new products and bulk up of products.

I am not one to usually ask this kind of thing but if there are people out there willing to give him a few dollars to pay this fee, I am sure he would appreciate it. A buck or two from a handful will do. if you feel he has been an asset and you have a few dollars to spare, it might be worth getting him on board as a supplier. Then he could have his own threads etc...

He's had a LOT of bad luck recently and I believe he has given to this community.

The 50 dollars is a new fee and ironically I was the first to ever pay it. Well worth it for sure, but some people are just down on their luck. if you want to donate and do not know how to contact him or feel weird sending him some money, PM me and we can arrange something. We can keep it secret or not, whatever it takes to get him back on.

I don't mind a bit to help. Chopper has been good to me. I will send him $10 now. If 4 more join in that covers it!

 

[Reddhott]

i can donate to him

 

[izdalion]

I so wish I could help but I'm in the same down on there luck boat. But i'll spread the word for sure.

 

[Macroerror]

If Reddhot54 and Braichas give I can supply the rest Of the $50 that is needed.
Please let me know how!

 

[Reddhott]

i just need to know how to send the money

 

[NoMoCigars]

Eric:

Count on $5 for Chopper from me, maybe you can tally up the offers and let us know what is the best way to get him back.

 

[GoodDog]

I'm also using the same cartos I bought back in April. The second set I bought long ago went bad. Bad batch I think, but the old ones and the new ones just keep going and going and...
BTW I didn't buy the bad ones from Eric. If I had I feel assured he would have honored a return and not made me feel like it was user error.

Chopper needs to read the forum rules well because there are some threads he can't post in or he'll be banned.

 

[gormly]

Eric:

Count on $5 for Chopper from me, maybe you can tally up the offers and let us know what is the best way to get him back.

Just send me a PM if you do not have the info to send him a donation, I'll give you his email for PayPal

Update: I am pretty sure we are close to what he needs.

 

[gormly]

From Chopper:

I do appreciate it though so very much and I'm grateful to you and everyone that is willing to help.... and Ive read over the supplier rules that they have sent me in an email.

Could you please pass along my gratitude to everyone until I'm back on and can do so myself. Seriously if I'd known I was doing something wrong I would have tried my best to fix it. I just never knew the rules of being a supplier as I never intended to being one. So I had no reason to even read the rules of it

 

[sonicdsl]

From Chopper:

I do appreciate it though so very much and I'm grateful to you and everyone that is willing to help.... and Ive read over the supplier rules that they have sent me in an email.

Could you please pass along my gratitude to everyone until I'm back on and can do so myself. Seriously if I'd known I was doing something wrong I would have tried my best to fix it. I just never knew the rules of being a supplier as I never intended to being one. So I had no reason to even read the rules of it

Eric let me know what else is needed for Chopper. I'd love to help!

 

[gormly]

I think he still needs a few dollars, not sure. We are close though as long as everyone who said they would help did.
PM me if you need his email for PayPal, it's his primary email account.

 

[sonicdsl]

I think he still needs a few dollars, not sure. We are close though as long as everyone who said they would help did.
PM me if you need his email for PayPal, it's his primary e ericmail account.

Thx Eric... Just found his em in a pm from a month our so ago so I sent him a message.