Official DiscountVapers.com Thread

[gormly]

For those of you who want a consistent 4v+ vape on a Go-go Carto you can use the New XL3 18650 with variable voltage with a slim 510 to Go-go adapter and keep it on the red setting which gives 3.8 to 4.0 (but slightly higher with charged batt)

You really can't even see the adapter in this pic, it's so small.
So this is almost like a Go-go Variable Voltage Battery

 

[Urge]

Eric, This Go-go Jumbo battery is exactly what I have been wishing for but I'm not sure I will buy one because of the cone issue. I have dropped my Go-Go multiple times and I think without the cone I would have broken it. Is there any chance the manufacturer could/would modify it and add the threads for a cone?

Urge

 

[MissP]

Just in case anyone wonders about sturdiness.... I never use the cones. I keep them around for when I am showing them off, but 99% of the time it is the go-go with a chopper tank, or adapter and CE3, or adaptor and duel coils. I drop them all the time. I even dropped my set up last weekend in the woods and it went down a rocky hillside I scared all the deer away climbing down for it, but for falling that far, it was fine

It has rolled off the hood of my truck, off the counters, off the nightstand, thrown at my hubby's head, ect.....

They are tuff buggers

 

[gormly]

Eric, This Go-go Jumbo battery is exactly what I have been wishing for but I'm not sure I will buy one because of the cone issue. I have dropped my Go-Go multiple times and I think without the cone I would have broken it. Is there any chance the manufacturer could/would modify it and add the threads for a cone?

Urge

Perhaps but not anytime soon, it took two months just to get them to make this one LOL.
But I will certainly mention it

 

[GoodDog]

Maybe something like the VGO cone would work without retooling the battery. That cone just snaps down instead of screwing down. There are no ridges or anything but it seems to hold it in place just fine.

 

[gormly]

Maybe something like the VGO cone would work without retooling the battery. That cone just snaps down instead of screwing down. There are no ridges or anything but it seems to hold it in place just fine.

do you have a link to a replacement VGO cone? Perhaps I could buy one and test it out.

 

[GoodDog]

I have one but they don't fit anything but the VGO. I can send you my VGO battery and cone though. It quit working right away so it's worthless to me other than being very pretty to look at. LOL

 

[gormly]

This is what I am coming out with next (2-3 weeks)
Tobbaco blends.

Original (regular tobacco), Cherry, Blackberry, Mint, Cinnamon and Vanilla.
All flavored versions will be subtle tastes, it'll be there but not overpowering.
Amber bottles for light protection (I read about that, not too sure it is needed but why not...)
I haven't decided on the caps yet, glass droppers are expensive and I want to keep the prices down. I was thinking of making them as a side item, an add-on? Any thoughts, suggestions, flavors etc... Please feel free.

Full size Label Sample (the nic amount is on the left side)

 

[Urge]

I have been following the thread about BE and one issue that came up was with lot numbers missing. I assume you will be having your nicotine tested and it should correspond to a lot number in case there is a problem. This business with BE is serious stuff and some kind of regulation, either self reg. or some govt. agency is probably inevitable. My suggestion would be for you to be out front on this. People will have more confidence in your product because you will be viewed as a stand up guy. Those of us here already know that but new customers won't. I believe the rules of the game will change over the next several months and years. The wild, wild west is about to get tamed.

Urge

 

[sonicdsl]

I have been following the thread about BE and one issue that came up was with lot numbers missing. I assume you will be having your nicotine tested and it should correspond to a lot number in case there is a problem. This business with BE is serious stuff and some kind of regulation, either self reg. or some govt. agency is probably inevitable. My suggestion would be for you to be out front on this. People will have more confidence in your product because you will be viewed as a stand up guy. Those of us here already know that but new customers won't. I believe the rules of the game will change over the next several months and years. The wild, wild west is about to get tamed.

Urge

Didn't he cover this a few posts back?

http://www.e-cigarette-forum.com/fo...ead-formerly-go-gousa-com-57.html#post4576810

 

[gormly]

Didn't he cover this a few posts back?

It's never a problem to go over this multiple times, I want people to feel safe.

I have been following the thread about BE and one issue that came up was with lot numbers missing. I assume you will be having your nicotine tested and it should correspond to a lot number in case there is a problem. This business with BE is serious stuff and some kind of regulation, either self reg. or some govt. agency is probably inevitable. My suggestion would be for you to be out front on this. People will have more confidence in your product because you will be viewed as a stand up guy. Those of us here already know that but new customers won't. I believe the rules of the game will change over the next several months and years. The wild, wild west is about to get tamed.

Urge

If regulation happens, I will of course follow it. Until then I believe my methods are good enough to ensure the saftey of my product. I start with the strongest Nic concentration available so the chance of sending someone something higher than calculated based on a diluted solution is nil. If I purchased 250mg nicotine and then started diluting from there, it would certainly be possible for me to make a mistake, because they might send me 500mg by mistake, but because I start with the highest, it can go no higher, therefore all I could ever do is make a LESS potent mix.

The BE thing is/has/was happening because they alledgedly have sold diluted product at a higher ratio than advertised, I've suspended this item in my sales (the nic base liquid) so I am left with just the flavored liquids. Because I dilute in a specific way, and use this as an additive to my liquid mixes, I cannot physically go higher than 36mg per bottle, ever. It's not possible.

My worry is only sending out too little, or less nic. A lot number wouldn't make much sense at this point, I do not sell enough (or make enough) at one time to warrant this. A lot number is an identification number assigned to a particular quantity or lot of material from a single manufacturer. The idea is that the lot number enables tracing of the constituent parts or ingredients as well as labor and equipment records involved in the manufacturing of a product (wiki). I use the same ingredients, I am the only worker and I used the same equipment each time. There wouldn't ever be any difference between Lot 1 and Lot 5683, and because I do not really sell a lot of this, I could easily track the original nicotine order vs. the sale of a liquid. The originator of the Nicotine being the only variable, and because it is pure nicotine, the only thing we'd be looking at it a lower concentration of nicotine.

If my logic here doesn't make sense, anyone is free to point it out to me. I'm not always the sharpest tool in the shed, so I am open to any suggestions.

 

[Urge]

I was just bringing up the part about using lot numbers because I didn't see any on his label. BE is getting slammed for not having lot numbers on some of their labels so I was just trying to save Eric from future grief. Sorry for any redundancy.

Urge

 

[sonicdsl]

I was just bringing up the part about using lot numbers because I didn't see any on his label. BE is getting slammed for not having lot numbers on some of their labels so I was just trying to save Eric from future grief. Sorry for any redundancy.

Urge

Oh no, I wasn't complaining, just thought you had missed it and didn't want you to miss out on some information he had given. Apologies if the impact didn't match the intent.

 

[gormly]

Updates on the dual coil Go-go Carto:

I realize I am biased but OMG I am in vaping heaven right now.

I have tried the Boges, assorted 510s, ego tanks and all kinds of other cartomizers (I don't do the atomizer/tank stuff) and I have to say this has been my best vaping experience yet. The flavor really pops, the vapor is fantastic and full. I just love these. I can't believe I am saying this but I like them better than standard Go-gos.

Honestly, if no one buys theses from me, I'll just have a lifetime supply and that is alright by me

So, with 36 hours + of testing there are a few caveats:
1. KEEP THEM WET
I cannot stress this enough, I burnt out my first one and there is no fixing it (unless Mohawkx comes up with something)
2. KEEP THEM WET (see I told you I couldn't stress this enough)
3. Overfilling: If you overfill it will leak out the bottom hole, NOT the sides, so far no leaks and not even a hint of a leak, I actually cracked one by twisting it too hard and it still didn't leak.
4. Batteries: On an old battery I had to pop the center post a bit. On new batteries they work just fine, but keep this in mind if it doesn't automatically fire for you.
5. Batteries 2: They work best on a FULLY Charged battery. If you feel the vapor/taste decreasing, charge it up!
6. Drip tips: All the drip tips fit but the stainless drips tips are not really a good choice to use on this as they get hot and that heat transfers to the drip tip...

I can't wait to get some reviews, I am positive you will be pleased.

 

[Spazmelda]

I can't wait to get some reviews, I am positive you will be pleased.

I wonder if these would work well in a tank. Hmm...

 

[gormly]

I wonder if these would work well in a tank. Hmm...

we will soon find out
I just have a find a method to punch them without breaking.

 

[Spazmelda]

we will soon find out
I just have a find a method to punch them without breaking.

Dremeling a slot would probably work. Send me some free ones and I'll test it out. Just kidding. I'll buy a few next time I'm in the money.

 

[GoodDog]

I can't wait to get mine!! I love the 510 clearos but I find that I have to keep them tilted battery end up to get the best flavor, anyone else find this?

What do you think of the XL3 battery, Eric? How long does it last on a charge? Are you charging it without removing the battery using a Go-go charger?

 

[wendallb]

I love the 510 clearos but I find that I have to keep them tilted battery end up to get the best flavor, anyone else find this?

I agree GoodDog, I can't lay mine on it's side because it will gurgle and sometimes get juice in the tip.

They also seem to get a dry hit sometimes when they get low on juice.

Just my opinion..

WendallB

 

[gormly]

I can't wait to get mine!! I love the 510 clearos but I find that I have to keep them tilted battery end up to get the best flavor, anyone else find this?

What do you think of the XL3 battery, Eric? How long does it last on a charge? Are you charging it without removing the battery using a Go-go charger?

You don't have the deal with tipping it as it has fill so it will work like any go-go carto, it's not a true clearomizer.

As for the battery, I am considering holding sales of it for now as I can't get it to consistently fire a Dual Coil. It works fine on the standard go-carts but once you put a dual on it, it won't fire and then sometimes it will no longer fire a standard


I have been talking to the manufacturer all day and they insist it works... it's starting to get me a bit peeved. I don't want to ruin the relationship by insisting but this is a huge loss for me if they do not work properly. They should work with all Go-gos especially the ones THEY made....

Ugg... this is hard sometimes ..

I'll keep you all updated.