So not much bigger than the GoGo battery?? A bit wider and a bit longer, a little over 10mm longer. I am looking at the XL2. Very nice and quite interesting! Any idea if the 5V batteries will fit in it? Great to hear you might get the cones too! Thanks!
Official DiscountVapers.com Thread
- Thread starter gormly
- Start date
- th_trl_thread_readers 0
- Status
I should have done this first before posting them ACK!, I am learning...
Go-go with wrap is in the middle.
Just ordered choppers 7ml tank today! i am so excited to try it out! From the reviews it sounds amazing.
Eric, Nevermind about the question about volts on the mod, i found it..
I am loving my purple cone!! I had to share my kit when my bf seen how Awesome the Go-Go was.
Eric, Nevermind about the question about volts on the mod, i found it..
I am loving my purple cone!! I had to share my kit when my bf seen how Awesome the Go-Go was.
I used the cleaning kit on 12 boge cartos, 5 echo-e cartos and 7 gocarts. Some of the cartos have been sitting in a plastic bag since late april. They all came out white and clean. I've tried 2 boge and 2 gocarts and they work as new. I don't know how long they'll last as I've only been using the gocarts for a week and the boges for 3 days but so far so good. If I can get 2 or 3 cleanings out of a carto before a rebuild is necessary then I'll feel really ahead of the game.
Any day now, one of the parts is taking a while, might be here tomorrow, I do not have racking on that item. I have everything else ready to go.
I have a question about the Go-Go batteries. Do the current batteries have the battery post/ charger problem or has this been corrected? I had some of the original batteries from Nhaler and Cigeasy when they first came out. They were extremely hard to charge (even with the charger sanded down). I really loved the Go-Go, but the aggravation was terrible. Maybe I just got defective ones. I'd love to get some of these new pretty batteries, but I'm worried about the battery posts. Thanks so much for reading.
I just got a purple battery and charger... it works WONDERFULLY!!! Works great on my older batteries too.... I put my original charger in a drawer for back up 
I got a kit with purple batteries and a new charger and they charge up great, no problems at all. I think you're safe to order ... and if it doesn't work, I'm sure Eric will replace them! He's kinda cool that way!
I haven't had a problem with this since way back when I started, (lol, "way" bacK) seriously though, no reports in quite a while and since all my stuff is directly from Kanger now, I expect even less issues to crop up. I didn't have much of an issue anyway, I think most of it came from v2 and v3 of the Go-go and we are now up to v4 as far as I know.
Update:
I received 3 of my 4 shipments today, the colors and rubberized are due tomorrow (not sure why they didn't show today)
Busy putting it all together for ship out now
The LCD Bateries in black and stainless came in and they feel nice, very light, lighter than you'd think. They came in uncharged so I am going to try and charge each one up before shipping, I have a bunch on a rack right now.
I will try to post some pictures a bit later.
Yep. Never a problem as long as I have stock.
I haven't had a problem with this since way back when I started, (lol, "way" bacK) seriously though, no reports in quite a while and since all my stuff is directly from Kanger now, I expect even less issues to crop up. I didn't have much of an issue anyway, I think most of it came from v2 and v3 of the Go-go and we are now up to v4 as far as I know.
Update:
I received 3 of my 4 shipments today, the colors and rubberized are due tomorrow (not sure why they didn't show today)
Busy putting it all together for ship out now
The LCD Bateries in black and stainless came in and they feel nice, very light, lighter than you'd think. They came in uncharged so I am going to try and charge each one up before shipping, I have a bunch on a rack right now.
I will try to post some pictures a bit later.
Yep. Never a problem as long as I have stock.
STAINLESS LCD, hot damn!
What did you use for cleaner? Vodka? And did you slip the filler out a bit to dry burn it or just a straight wash and dry? I'm in the same boat as you. If I can just keep them tasting clean for a week or more compared to my current 2-3 days I will be happy.
Sent from my DROID3 using Tapatalk
Bill, your stainless LCD will be in the post tomorrow morning! I'm going to charge it overnight.
Hopefully these kits that I will be selling will get you more than a week
But hey, not too much more, a guys gotta eat LOL
Update: It was brought to my attention that I might have given the wrong idea on not making the replacement cartos for Choppers prepunched cartomizers yourself due to shavings etc.. I should have said that I meant that for someone with no experience doing it, honestly anyone with a bit of experience with a drill bit, puncher or dremel can make these replacements. Just to clear that up. when I read it back (after being told) it did kinda read like I was trying to "scare" people off and that wasn't my intent.
I haven't had a problem with this since way back when I started, (lol, "way" bacK) seriously though, no reports in quite a while and since all my stuff is directly from Kanger now, I expect even less issues to crop up. I didn't have much of an issue anyway, I think most of it came from v2 and v3 of the Go-go and we are now up to v4 as far as I know.
Update:
I received 3 of my 4 shipments today, the colors and rubberized are due tomorrow (not sure why they didn't show today)
Busy putting it all together for ship out now
The LCD Bateries in black and stainless came in and they feel nice, very light, lighter than you'd think. They came in uncharged so I am going to try and charge each one up before shipping, I have a bunch on a rack right now.
I will try to post some pictures a bit later.
Yep. Never a problem as long as I have stock.
You know they have the 5 click shutoff don't you? I thought they might have shipped them in the off stage. I put in an order for a stainless to go with my ever growing Go-go collection.
Update:
I am out of bottles for Liquids, but have more coming in Friday. All orders from tonight through Friday will have a slight delay.
Please send me your reviews to post or post them here (good or bad) I know I need to improve on them so feel free to be completely honest! I have some new stuff coming in that should make my mixes even better, I have been buring the midnight oil learning all I can and some members have given me some fantastic advice.
I am out of bottles for Liquids, but have more coming in Friday. All orders from tonight through Friday will have a slight delay.
Please send me your reviews to post or post them here (good or bad) I know I need to improve on them so feel free to be completely honest! I have some new stuff coming in that should make my mixes even better, I have been buring the midnight oil learning all I can and some members have given me some fantastic advice.
Image of LCD's
Images of wraps.
These are mock up stickers that didn't quite fit or wrap properly, I didn't want to waste the good stickers because once you get them on...
Images of wraps.
These are mock up stickers that didn't quite fit or wrap properly, I didn't want to waste the good stickers because once you get them on...
Eric, any chance at a Go-Go passthru? Or a Go-Go that charges thru a mini-USB like the Leo
Not directly, although I can certainly make one.
I am looking for a rubber end cap for the USB cable that would exit the bottom like stress relief so I can make them myself and sell them to you all.
It's really easy I made one before and it's way back in this thread.
As far as the Mini USB, not yet they'd have to mod the case for that, sort of like the LCD was extended and after the initial issues with the LCD I am not sure they are going to do it again. I will ask about it. Maybe they have a bajillion cases just sitting around now
For now I only have the VV passthrough Option that takes a 510 to Go-go adapter, it's not a perfect solution but it works great. Once I get some stress reliefs proper I can try to order empty batt cases and make them in about 30 minutes or so.
roland did you get my PM?
*************************************************
Update:
Like a maroon, I forgot that the LCD has the 5 click on off safety feature and I assumed they were not charged, I figured it out after all the batteries I put on my rack charged up in less than an hour. On a side note, I purposefully dropped one several times and it still works (no worries I won't be sending that one out) I also submerged the lower part of it in a small cup of water (I don't recommend anyone try that), still works fine, so this is good news. Testing has gone well.
LOL, I just noticed I was already told this, I missed that post..
Last edited:
- Status
Similar threads
- Locked
