Official DiscountVapers.com Thread

[KalebK]

I already need a new bottle of that stuff you sold me on... Didn't like it then BAMN!!!! now it's almost gone ... YOU ALL ARE BAD INFLUENCES

What was it??

 

[LordDavon]

I already need a new bottle of that stuff you sold me on... Didn't like it then BAMN!!!! now it's almost gone ... YOU ALL ARE BAD INFLUENCES

I know. Happened to me like that too. I was like... "it's meh" Now it's my all day!

 

[LordDavon]

What was it??

It is a juice, but since it's not one that Eric sells, we don't want to talk about it too much here.

 

[me1969]

Maybe a bad batch of mini novas mine i just got bubbles from bottom when you take a toke dont notice leaks yet but just filled it and brought it to work we will see but took it off z max just in case.

 

[Zooker]

Well darn it, it still leaks. It appears to be coming from just one tiny spot at the bottom, at the top of the threads where the silver thingy screws on. Duct tape. I need duct tape.

 

[MrPicC]

Yes I'd never want to piss Eric off. Best site around, he's got my address and billing info also :O

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[gormly]

Yes. I sent you a Molotov cocktail. I tried to email you over the last few days.

It's ok. Back to football and colored metal sleeves!

Honest I am not ignoring you, send me an email now to eric at gormly dot com then post here what time you send so I can see if there is something going on.

 

[gormly]

Yes I'd never want to piss Eric off. Best site around, he's got my address and billing info also :O

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Yea but I don't have your CC info so you're safe
That's all offsite, I never see it

so the worst I could do is send you a poorly written and spelling mistake laden letter...

 

[gormly]

It is a juice, but since it's not one that Eric sells, we don't want to talk about it too much here.

maybe LD will send me a small sample...

 

[MrPicC]

Hell I'll send u a sample.... deliciousness and then maybe you can make your own

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[gormly]

Hell I'll send u a sample.... deliciousness and then maybe you can make your own

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Heh, maybe.

I am trying for one other person, his favorites, it's a tough nut to crack but I'll be trying again this weekend for him.
It's pretty good so if it works out it's fun for all. I need some more complex liquids on the site.

 

[bmrdave]

Ok, I took it apart and cleaned everything, there is no o-ring...so I unwrapped the other one I bought and took it apart, no o-ring in that either...so i don't think they come with one. I put it back together and refilled it and sat it on some paper towels to check for leaking in a few minutes--maybe it was just screwed on wonky when I unwrapped it yesterday and I didn't notice...crossin' my fingers, because I sure like how it looks on my mini batteries with the thread cover on. Either way, I'll still use it, I'll just get some pretty colored duct tape and seal it up with that if it still leaks.

I think you can see it in this picture, this one is actually a little out of alignment and I'll tuck it in with a blunt syringe tip.
The first MiniViviNova I had leaked too until I noticed that when I unscrewed the tube from the base it brought the o-ring with it, so I put it back in the bottom, and tucked it into the slot down there. No leaks since.

The ring is kind of an opaque-ish white and in dim light almost looks like it's just a ridge of metal on the bottom of the base, so use bright light. If it's not there, there will be a lot of leaking.

 

[MrPicC]

Yea but I don't have your CC info so you're safe
That's all offsite, I never see it

so the worst I could do is send you a poorly written and spelling mistake laden letter...

I don't own a pen so you win.
Question---- I have 4, 18350 batteries labeled "made for Vmax" These would work fine in the segelei I ordered? Just thought about it and since I'll receive tomorrow I ask

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[Zooker]

View attachment 135977
I think you can see it in this picture, this one is actually a little out of alignment and I'll tuck it in with a blunt syringe tip.
The first MiniViviNova I had leaked too until I noticed that when I unscrewed the tube from the base it brought the o-ring with it, so I put it back in the bottom, and tucked it into the slot down there. No leaks since.

The ring is kind of an opaque-ish white and in dim light almost looks like it's just a ridge of metal on the bottom of the base, so use bright light. If it's not there, there will be a lot of leaking.

Well butter my buns 'n call me a biscuit!! There IS a little bitty o-ring in there! Of course I'd just gotten the perfectly trimmed piece of duct tape on there to seal all around the tube...lol

I first checked on my new mini that I hadn't used yet, I could not see that o-ring, so I took my blunt tipped syringe (thanks for that suggestion!) and sort of ran it around the bottom and I could feel the o-ring in there, so I emptied the leaky one (again) and rinsed off the bottom and dried it out and stuck the syringe down in there and yep, definitely could feel the o-ring...couldn't see it though.

I had to use a magnifying glass to actually see it, couldn't see that it was mucked up at all though, so I just went around it several times with the syringe and made sure it was meeting the bottom of the metal all around. Put it back together and refilled it (again!) and am now sitting here staring at it, daring it to leak.

Actually, not staring at it, I put it back on that darling little VV passthrough that I bought from Eric and am sitting here vaping the schlitz out of it, waiting for leaks. So far there are no leaks! Thank you!!! I would have never ever in a million years figured that out!! Once again, the forum saves me!

 

[LordDavon]

maybe LD will send me a small sample...

I think I told you that I was going to, at one time. I really need to get that out.

 

[sonicdsl]

YAY Another problem resolved in the forum!

 

[AG51]

YAY Another problem resolved in the forum!

...........

 

[bmrdave]

Well butter my buns 'n call me a biscuit!! There IS a little bitty o-ring in there! Of course I'd just gotten the perfectly trimmed piece of duct tape on there to seal all around the tube...lol

I first checked on my new mini that I hadn't used yet, I could not see that o-ring, so I took my blunt tipped syringe (thanks for that suggestion!) and sort of ran it around the bottom and I could feel the o-ring in there, so I emptied the leaky one (again) and rinsed off the bottom and dried it out and stuck the syringe down in there and yep, definitely could feel the o-ring...couldn't see it though.

I had to use a magnifying glass to actually see it, couldn't see that it was mucked up at all though, so I just went around it several times with the syringe and made sure it was meeting the bottom of the metal all around. Put it back together and refilled it (again!) and am now sitting here staring at it, daring it to leak.

Actually, not staring at it, I put it back on that darling little VV passthrough that I bought from Eric and am sitting here vaping the schlitz out of it, waiting for leaks. So far there are no leaks! Thank you!!! I would have never ever in a million years figured that out!! Once again, the forum saves me!

Glad I could help and hope it holds. Mine has been fine since the "surgery". I just make sure the top and bottom are snug because there's a little burr on the top of the tube of that first one and if I don't put the cap on firmly it seeps a little. I just need to sand the burr off.
I can sympathize with the hard to see bit too. I really need to go to an office supply store and get one of those articulating circle lights with a big magnifying lens in the middle that clamps to a table edge! Leaves both hands free for tinkering!

 

[Zooker]

Glad I could help and hope it holds. Mine has been fine since the "surgery". I just make sure the top and bottom are snug because there's a little burr on the top of the tube of that first one and if I don't put the cap on firmly it seeps a little. I just need to sand the burr off.
I can sympathize with the hard to see bit too. I really need to go to an office supply store and get one of those articulating circle lights with a big magnifying lens in the middle that clamps to a table edge! Leaves both hands free for tinkering!

I totally need one of those!!! Ya think Office Max might have that? I will have to get one before I start fiddlin' around with my Griffin, because right now my fiddlin' is confined to the top of the stove with the light above it, it's really not the best place to work.

 

[Zooker]

YAY Another problem resolved in the forum!

I'm definitely doin' the happy dance over here! Still no leaks, we have a WINNER!!!