Official DiscountVapers.com Thread

Status
Not open for further replies.

me1969

Ultra Member
ECF Veteran
Verified Member
Apr 30, 2012
1,539
1,546
wherever I roam
I started with 36mg,then 24mg,now a mix of 24 and 18.I start my day off with 24mg then as the evening comes around I drop off to 18mg.My body doesn't even know the difference and I sleep better with the drop to 18mg going into the night.Also though what works for me may not work for others.This is just how I do it and I can even go all day with just 18mg and I'm okay.I find when I'm stressed is when I crave more nic.So emotions in my own opinion has something to do with it in my case.As the others have said,do pace yourself and drop a level slowly.I'm no Dr,but I did sleep at a Holiday Inn Express lol for those who have seen those commercials.Best wishes to you with this.

Haha i'm in a holiday Inn express right now .
 

BuGlen

Divergent
Supporting Member
ECF Veteran
Mar 6, 2012
1,952
3,976
Tampa, Florida
Has anyone tried punching and using the Kanger XL SS single coil cartos in a tank setup?
Kanger 510 XL Horizontal Coil Cartomizer - Stainless - 5 Pack

I'm curious about them because I've heard good things and the price is really good on the 5 pack that Eric has on the site now. I've tried the Boge (didn't care for them), and I'm currently using Smoktech 3.2 ohm which have been working fairly well for the most part. I've been very impressed with the Kanger clearos so far, so I'm interested in their cartos as well.
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
You guys need to stop buying the stuff I need but have to wait until payday to get : (

DV mini novas ego threaded, 2.4 heads for those, T3 replacements...all coming back in stock soon, I hope?

Yes, all coming back, although I do have some of the DV Mini Nova heads that were not listed, I just put them back in stock.
I am order 4x the amount I normally do, so hopefully that's enough for the next order. Seems no matter how many I get I just can't keep them in stock.
 

fourthrok

Vaping Master
ECF Veteran
Verified Member
Aug 12, 2012
3,192
7,709
Watertown, NY
I agree with the Ring Ding Monkey :)

Go slow, but do it, drop down one level. If you go too low at first you will end up vaping more to get the nic you crave and that has it's own set of problems. 18 next, maybe get a bottle of 12 also and swap, see if you start to crave more, if not stay on 12 if so stay on 18 for a while and rinse repeat with lower levels.

I started with 18mg in Sept. 2011 then jumped to 24mg. in October. By the end of November I was on the quest to go downwards with the nic due to heart health (I also have high BP). Anyway...this is a copy of a conversation with some people at another forum...explaining how to mix different nic strengths to get to where you want to be. I went real slow...by the time this convo started, I was trying to drop from 12mg. to 9mg. or thereabouts. I've been dropping since Dec. of last year...and started DIY about 4 months ago. By going slow and easing down (don't feel limited by what is offered by the vendors...mix your own for the strength you want) I'm now at 4mg. and doing very well...very happy. Not missing TH, flavor or anything else. I plan to keep on going. Maybe within 4 to 6 months I'll be at 0 nic. But I'll still be vaping! Now..let's see if this convo will copy here:

Nicotine strength... Help please!
emeleste Posts: 5,281V2 Veteran
January 11 in The World of E-Cigarettes Flag
I can do a basic calculation when mixing something like 2 different juice nicotine strengths, but I'm a bit lost at the moment with what I'm trying to do here. I am trying to come up with a strength around (no more than) 9mg. I have an empty bottle and am trying to mix some existing juices I have into the empty bottle for ease of filling. Okay..what happened is I bought some 24 mg. juice that is WAY to strong for me. I also have some 6 mg. of the same flavor and some 0 mg. of a complimentary flavor that is the same, but from a different vendor. They should taste fine together. My initial calculations are:

10 ml. of 6 mg.
3 ml. of 24 mg.
2 ml. of 0 mg.

My brain has turned to mush...I am thinking I'm pretty close to getting a total of 15 ml. at a strength of around 9 mg. Am I right? Help please!!
Tagged: how-to
--------
Comments

dB Posts: 721Member
January 11 Flag
@emeleste, I'm getting 8.8mg, but need a smart DIYér to double check my math please
Quote

MomPosts: 2,577V2 Veteran
January 11 Flag
If your measurements are exact, the nic level is 8.8


((10*6)+(3*24)+(2*0)) / 15 = 8.8



dB Posts: 721Member
January 11 Flag
^^^ thanks @mom


emeleste Posts: 5,281V2 Veteran
January 11 Flag
Oh good!!! Then I really was close to what I had in mind! I thought I was...but wanted to be sure before I finished mixing! Thank you so much!!
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
Any special Black Friday deals goin' on at DV?

Yes.. on Friday :)
But no hopes for the staples though.. so no T3's and T2's, but other stuff, most certainly.
I plan on clearing out some older stuff so great deals on low numbers of items and then some good stuff as well.

Not sure how extensive but it should be pretty good.

I cannot promise it but I should be putting it all online between 12 midnight and 1AM tomorrow night.
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
I just opened an Itaste MVP and I am impressed, charged my phone with the included cable and then charged the MVP with the phones charging cable also, very cool.

It has a nice even vape to it. Better hand feel than I thought it would have. It will be nice to keep this in my car for battery emergencies also :)
DiscountVapers.com_Innikin_MVP_package_black__31148.1352985438.1280.1280.JPG
 

yiddleboge6

ECF Guru
ECF Veteran
Verified Member
Apr 25, 2012
16,850
94,508
PA
The display and operation appears to be the same as the iTaste VV, but I see no mention of the "recommended voltage" that is available by pressing both buttons at the same time. There was also no mention in the Video.

Does it have this function Eric?

RodeoGeorge

I have the iTaste and was wondering about that also..........since it doesn't give you an ohm reading, having the recommended range of settings is helpful for those who are new to vv
 

madmach

Super Member
ECF Veteran
Mar 2, 2011
380
315
El Paso Tx
SO it is time to buy some new tanks now if Eric did not find them like i think. I have looked all over the net with out much luck got two of the new one,s from eric having a hard time is it going to be 2.4 or 2.8 ohms.I do like the 2.4 on the bolt not that hot of a vap that i like but the 2.8 is nice with vv for the sweet vap.
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
The display and operation appears to be the same as the iTaste VV, but I see no mention of the "recommended voltage" that is available by pressing both buttons at the same time. There was also no mention in the Video.

Does it have this function Eric?

RodeoGeorge

It does not seem to and it's not in the instructions
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
I put up a Black Friday category so you all can see what is going on sale.
This way you can plan accordingly with Vendors you are planning to check out.

Not everything is listed yet, but the bulk of it is. There will be other items listed just before Midnight tomorrow.
Lot's of it is limited stock and I am taking this opportunity to move some stuff out because I literally have NO room left! (seriously it's a mess!)


Right now I am planning a 30% off sale on all products in the category




some "catches"

There are no preorders or holds and everything is first come first serve.
Carts are going to be reset just before midnight so there is no hoarding or unfair cart sniping.

There are also no refunds to be given if you order early and claim you didn't see it :ohmy:
 
Status
Not open for further replies.

Users who are viewing this thread