Official DiscountVapers.com Thread

Status
Not open for further replies.

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
I once got the most nasty taste from a brand new rebuildable atty! I thought I would never vape again! I just couldn't get that taste out of my mouth, nose and mind! Turns out, it was machine oil.... I didn't inhale it, but still... from a different vendor, also...
Soooooo, now I use hot water and then vodka, just in case.

I haven't had a lot of luck with dry burning though.... I suppose it would be worth a try if you are just going to toss the thing anyway. You would have nothing to lose. But, in the case of a brand new wick and coil, I can't see doing that as it is supposed to remove the gunk that has built up on the coil. You wouldn't have that problem as it is new. I would just give it a good bath and let it air dry for a while after gently wiping the wicks dry. Let us know and good luck!

I hope to try to re-wick these things myself. I have the wire and am still reading about different types of wicks.


was it one of mine? If so let me know I'll check the lot of em' :)
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
busy busy,. though for a moment why I was so busy then realized.. lol Holidays!

I had to take liquids off for a little while, I have to put in age verification software on the back end (like madvapes has) or the bank will cancel me.
So until that is finished and 100% liquids are off. Shouldn't be long.

I might have to add a field during checkout or sign up that says something like "if you order liquids please add the last two digits of your SS number together and write the answer here" or something like that.

if you see it and are not freaked out buy it please fill it in, but you are free to ignore it, it is not a requirement.
 

gormly

Unregistered Supplier
ECF Veteran
Jun 9, 2011
4,504
7,464
Connecticut USA
www.discountvapers.com
New Products today


First Kanger T2's, T3 and the replacement coild heads are all in stock, I purchased a lot this time and more coming so hopefully I donot run out again.

Same with the Go-go, got mucho cartomizers in today :) plus the Go-go USB charging Cables



Next:

Vision's version of the Vamo

Vision Variable Voltage & Wattage Transformer Mod - Chrome
&
Vision Variable Voltage & Wattage Transformer Mod - Gun Metal

DiscountVapers.com_Vision_VW_chrome__72506.1355341491.1280.1280.jpg


DiscountVapers.com_Vision_VW_chrome_2__03081.1355341493.1280.1280.jpg


DiscountVapers.com_Vision_VW_chrome_3__42857.1355341495.1280.1280.jpg


DiscountVapers.com_Vision_VW_chrome_4__07380.1355341497.1280.1280.jpg


The Newset Mod from a brand you trust.
A 3-6V or 3-15 watt incremental Variable Volt/Watt Mod that accepts either one 18350 battery (as a mini) or an 18650 as a full size.
You can have it both ways now with the removable extension cap.
!

Chrome Finish (also comes in Gun Metal)
Height: (full size) 137mm
Diameter: .22mm diameter.

Features
Displays.battery volts/watts
Displays atomizer/cartomizer ohms.
5 Click on/off feature.
Sealed 510 recessed eGo connector

Vision Variable Voltage Transformer Mod.instructions:

Large Button - Click quickly 5 times to turn On/Off. This is also the button to activate the device to vape.

Smaller Buttons - Used to increase or decrease your voltage/wattage.

Mode/Features:
Top Left Small Button - Push.and hold the button for 3 seconds it will read the battery voltage or charge left in your battery.
Top Right Small Button -Push and hold the button for 3 seconds it will read the resistance of your cartomizer or atomizer in ohms.
Both Buttons: Hold Both buttons for 3 seconds and it will change from Variable Voilts to Variable Watts

************************************

I also have the WildFires back in, Neptune tank, more adapters and new drip tips, spinners in blue and all the Vision CE4 colors are in both resistances.
I also have the tank cones back in stock that sell like they are made of gold :)
 

txtumbleweed

Resting In Peace
ECF Veteran
Dec 7, 2009
6,418
9,433
Walla Walla
Hey Eric, are u sure the Vision does Wattage as well as Voltage? I heard it just did VV...

I think that was a misquote from another vendor that started that rumor. They have changed their description now to state they are also VW. I believe they have all been VW from the beginning.
 
Last edited:

KalebK

Vaping Master
ECF Veteran
Verified Member
Apr 2, 2012
3,181
5,526
Spokane, WA
I think that was a misquote from another vendor that started that rumor. They have changed their description now to state they are also VW. I believe they have all been VW from the beginning.

Oh great, I feel horrible now because I thought the Vamo was the only one that did VW, so I purchased it from another vendor because I really wanted Gun Metal and saw that Eric was only getting the Vamo in Chrome. I'm sorry Eric!!! You are still my favorite! I've felt sick ever since I pushed the Check Out button!!!
 

sonicdsl

Wandering life's highway
Supporting Member
ECF Veteran
Verified Member
Aug 11, 2011
17,744
19,245
busy busy,. though for a moment why I was so busy then realized.. lol Holidays!

I had to take liquids off for a little while, I have to put in age verification software on the back end (like MadVapes has) or the bank will cancel me.
So until that is finished and 100% liquids are off. Shouldn't be long.

I might have to add a field during checkout or sign up that says something like "if you order liquids please add the last two digits of your SS number together and write the answer here" or something like that.

if you see it and are not freaked out buy it please fill it in, but you are free to ignore it, it is not a requirement.

That reminds me, I've been meaning to tell you that your age verification only works when going to the home page, and not to a product page (such as clinking your links in your product announcements). Very easy to bypass atm, so good on you for adding that on the back end either way. :)
 

mattiem

ECF Guru
ECF Veteran
Verified Member
Just wondering if you are going to restock the CE3's. Even with all the great JDD's coming along, the CE3's are the only thing hubby will use and now my sister has fallen in love with them too. Please say you just have to much on your plate right now and just haven't ordered them and that you will after the Christmas rush has passed. :D
 
Last edited:

beebopnjazz

Vaping Master
Supporting Member
ECF Veteran
Verified Member
Jan 20, 2010
7,829
8,247
PA
Ok peeps - have a question for ya. Do the Efest IMR batteries fit in the Provari? I've only used the AWs til now..but managed to snag the extension cap I needed and want the 18650. The AWs are 65mm (+/-.5) but the Efest say 66.58 on DVs site and 66 on another vendor's site.

Of course I prefer to order through Eric..but I need to know with certainty that these batteries will fit. :)

Thanks guys!
 

AG51

ECF Guru
ECF Veteran
Jan 23, 2011
82,919
390,399
Dat Way →
Ok peeps - have a question for ya. Do the Efest IMR batteries fit in the Provari? I've only used the AWs til now..but managed to snag the extension cap I needed and want the 18650. The AWs are 65mm (+/-.5) but the Efest say 66.58 on DVs site and 66 on another vendor's site.

Of course I prefer to order through Eric..but I need to know with certainty that these batteries will fit. :)

Thanks guys!
I used the efest 18500's in my provari with no troubles at all (button top ones) if that helps you any Beebops :) Never tried the 18650's (efest) in it and have since given my provari away so can't tell ya more honeys
fairesapin.gif
Happy BeeBoppin Holidays to You !
 

AG51

ECF Guru
ECF Veteran
Jan 23, 2011
82,919
390,399
Dat Way →
Thanks AG! :)

You gave your Provari away? 8-o What's wrong with you woman!
:lol::lol::lol: For "me" it was just too heavy and bulky to like it much. Didn't use it enough to warrant keeping it and I knew some one who was trying so hard to get one, and would love it to death, so I gave him mine. A PIF for a beautiful person who deserved it. :)
 
Status
Not open for further replies.

Users who are viewing this thread