Official DiscountVapers.com Thread
- Thread starter gormly
- Start date
- th_trl_thread_readers 0
- Status
I was hoping for better news. Maybe a school buddy could download the update and help you upgrade the firmware?No, sadly I don't.
Sonic had a good suggestion...maybe someone in the Evic subforum could help you out. Bummer that this is happening with the new shiny
Thanks for the info! My unit isn't on the recall list, I checked.
I think it might just be my mind playing tricks on me, because I have a Protank on right now @ 8 watts that's putting out clouds! Overall, I'm happy with the device. Good luck @ the doctor!!!Thanks sonics! Yes I do frequent the eVic forum!Howdy DV'ers! Hope you all have a Wonderful Wednesday!
Sorry Kaleb, but not sure how to help. I don't pay much attention to if the voltage drops under load, etc. I put it at the wattage I like, and leave it. If something happens to the vape I experience, then I'll look into it, but so far so good for me. I'm still at 1.2, btw, haven't looked into 1.3 yet. So far the only interesting thing about 1.3 is that the sleep function is moved to the top of the menu list. One day maybe.
Anyway, there's a whole sub-forum on the eVic here: eVic . Maybe there's a thread there that can help, or you can start a new one?
Wish I knew how to help.
Last edited:
I was hoping for better news. Maybe a school buddy could download the update and help you upgrade the firmware?
Sonic had a good suggestion...maybe someone in the Evic subforum could help you out. Bummer that this is happening with the new shiny
Its all good, its still pretty! Lol.
Mine too
Do u charge the battery by the USB? Do you notice a drop when the battery gets low? I think that was my problem. I can't return it even if I wanted to because that stupid USB port cover wouldn't go back in and it was driving me crazy so I pulled it out!
Do u charge the battery by the USB? Do you notice a drop when the battery gets low? I think that was my problem. I can't return it even if I wanted to because that stupid USB port cover wouldn't go back in and it was driving me crazy so I pulled it out!
Well I somehow forced myself to be patient w/the USB port cover. Yes, I charge it that way, but plugged in to the wall, not to the PC (because it happens to be more convenient to me that way). Twice I had sudden vapor dip, and looked at the screen, and saw Low Power or some such message, now that you mention it. I just put it on the charger & used my GoGo or Spinner instead while waiting.
Did u wait until it was fully charged to use it?
Vamo arrived. Looks like a nifty little APV. I'll be taking it to work to save the wear and tear on my Provari, that has a nice "accent stripe" in its black chrome from bouncing around in the truck. (In other words, a scratch
) I'll be sure to put the evods on it gently so as to prolong the time until I have to do the o-ring connector dance.
edited to add: No dino
) I'll be sure to put the evods on it gently so as to prolong the time until I have to do the o-ring connector dance.edited to add: No dino
I'm really liking this Vamo. In 350 config it's a hair shorter than my Provari. It's like a Mini for me at a quarter the price. Probably better because I've got big hands and I think I would have a hard time holding on to anything shorter.
I like my vamo. I use it daily, the aforementioned o-ring, is that at the top of the head unit? Over the battery i see a o-ring. looks little smaller then a garden hose washer.. Mine is a bit offset, but its up there. Possibly, if it shifts a 3mm or more, my battery wont connect to the head unit (top - switch n electronics). Vamo is gunmetal finish, fits aga t like a glove. Want to know of upcoming maintenance? I can see an evic here, in June, for sure.
To clear the above up = "I'll be sure to put the evods on it gently so as to prolong the time until I have to do the o-ring connector dance."
PS Dr said come back in three weeks. Hurry up n wait.
To clear the above up = "I'll be sure to put the evods on it gently so as to prolong the time until I have to do the o-ring connector dance."
PS Dr said come back in three weeks. Hurry up n wait.
Last edited:
When I was reading up on the Vamo there were threads about the insulator around the center pin of the connector breaking and causing a short if a device was screwed on too tight. There are already a couple of different ways posted on how to fix it. I don't think it will be a big deal.
Send it to Stoneface if it breaks, he'll fix it for ya!
Send it to Stoneface if it breaks, he'll fix it for ya!
Aw shucks, guys....thanks
Some people have had trouble with the center pin insulator, which is soft and tends to fail if atty devices are screwed on too tightly. Some have also blamed the eGo/510 adapters that they use. It isn't a huge deal to fix it, but it is fiddly work. I ended up using a new insulator to fix KalebK's Vamo because my Home Depot didn't have the required washers, and it might be a better fix in the end. The insulators isolate the pin as it passes through the body and the washers hold the pin up so that in theory it won't touch the body. I've read a couple of people had trouble with the washer fix and gave up on the Vamo. It's too bad, I think it is a good device and I haven't had any trouble with mine (knock on wood).
EDIT: Good morning and have a good one...
Last edited:
LOL, good morning ZookerWell good morning there, Love Bug!
It's good to see you, I think it's been a day or two...
Yeah, I've been in and out mostly reading, not a lot of time to post. Hope everyone has an awesome day!
- Status
Similar threads
- Locked
