Official DiscountVapers.com Thread

[Devonmoonshire]

Okay I am thinking Silver Go Go LCD Battery, Blue Stainless Steel Cone, Go Go Battery to 510 adapter and a nice XXL Dual Coil Cartomizer to top it off Wrapped ever so nicely in a Cowboys Battery Skin with cutout for the LCD

Nate aka Darth Vapor

 

[BILLB OKC]

Damn, now I wish I had ordered one of those red batteries that was on sale over the weekend!

 

[gormly]

Dang...and I thought Chopper was good people...

G O C O W B O Y S !

Also looking forward to Eric's game changer.... (no jokes please!)

Sent from my Galaxy Tab using Tapatalk

I made this one for someone just the other day:

and I can certainly make this easy one:

 

[BILLB OKC]

***** *****

 

[sonicdsl]

Okay I am thinking Silver Go Go LCD Battery, Blue Stainless Steel Cone, Go Go Battery to 510 adapter and a nice XXL Dual Coil Cartomizer to top it off Wrapped ever so nicely in a Cowboys Battery Skin with cutout for the LCD

Nate aka Darth Vapor

I'm thinking you have a fantastic idea there! I ordered the blue batt/kit this weekend. I think I will hunt down a helmet logo to add to the batt myself!

 

[sonicdsl]

I made this one for someone just the other day:

and I can certainly make this easy one:

Partial like (YAY COWBOYS...not so much sooners... Sorry Bill! I'm a Longhorns fan! ) !

I only want a small helmet for my blue batt - don't wanna hide the gorgeous blue steel! I might've picked that label on a plain black or s/s one though. I have 2, but don't trust myself to apply the label properly!

 

[BILLB OKC]

and I can certainly make this easy one:

that would be the logo i want for my tank!
and maybe another for my stainless gogo that is collecting dust!

 

[gormly]

Ok, looks like I got some people riled up for some skins.. so here is the procedure.
Order the custom skin on the skins page. You get TWO skins of the same type for every one you order
(in case you mess up, or as a bonus in case you don't)

Customs require one of two things:
1. Go Eric, do your thang... meaning you just tell me what you want and I design it
2. You send me a logo or an image that you want used.

In EITHER case, you need to send me an email with the order number telling me.
It also takes up to a week to get as I do not see the maker until the weekend, so they will always go out the following Monday.

The tank skins are not final and not on the site, so you can't order... yet... I have to figure out how to keep the costs down for what is simply, a sticker. Nice vinyl that will last a long time, but still, a sticker. I hate charging what I charge for them, but my hands are tied really, it's not my equipment and supplies making them, and I can't afford that printer (28k)

Once I get the sizing proper and there are no white rims, we'll be all set for that.

Now, there should be enough dvr'ed game to go watch my dolphins get pummeled commercial free, I am off for the night.

 

[caillel]

Hey, they scored first, you never know......

 

[Devonmoonshire]

I made this one for someone just the other day:

and I can certainly make this easy one:

OMG!!!! That Is Awesome!!!!!! I Like It !!!!!

Nate aka Darth Vapor

 

[texastumbleweed]

i just got my second order from eric at go-gousa..once again, fast shipping. i got the chopper. how exactly do i use it?

 

[Major]

Okay now, that's just wrong, lol! Eric shipped my first order out Saturday from Connecticut and I got it delivered today in Florida... Not only does he ship amazingly fast but I must be on a direct route with his shipping area. You gota admit that is amazing speed!

Now I must admit that I like my flavor to reach out and slap me in the face strong but you nailed the lemonade man! If it was a tad stronger and a touch sweeter, I could honestly see me getting a large bottle of it. I mean the 125ml size. It is that good. I am letting the French Toast steep based on other reviews though.

If any of you like lemon anything, you need to try the lemonade. It is spot on and at a price you can really afford. Thanks again Eric! Oh and I am like Ms. Tumbleweed on the Atmomic Fireball flavors. We both use it daily and primarily. Any chance we'll see your version of it anytime soon?

 

[texastumbleweed]

yep Major S. atomic cinnacide is the "crack" of ejuice.........its what i vape primarily and doctor up any substandard ejuices with, or just use it to make others stronger. i got the CHOPPER tank today and want to hear from anyone who has one, how to use it properly.. dont want to screw it up. waiting to hear from someone in go go nation!!!

 

[Cisme]

...Now I must admit that I like my flavor to reach out and slap me in the face strong but you nailed the lemonade man! If it was a tad stronger and a touch sweeter, I could honestly see me getting a large bottle of it. I mean the 125ml size. It is that good.

I agree it's fabulous for a lemonade lover. I was thinking of asking Eric if the flavor could be punched up a tad next time I order but the mix is so good, and sweet enough for me, that I kinda don't want to risk it!

I am letting the French Toast steep based on other reviews though.

Me too. Getting anxious though. And I have the Blackberry which is great on it's own but my second thought on vaping it was "wouldn't this be great mixed with Waffles or French Toast?" I hope to try that soon.

If any of you like lemon anything, you need to try the lemonade. It is spot on and at a price you can really afford. Thanks again Eric!

I'm thinking I should look for a juice review thread and let others know.

Oh and I am like Ms. Tumbleweed on the Atmomic Foreball flavors. We both use it daily and primarily. Any chance we'll see your version of it anytime soon?

+1 on Lemonade and fireball as daily and primarily! Although, Blackberry has entered the race.

 

[Cisme]

yep Major S. atomic cinnacide is the "crack" of ejuice.........its what i vape primarily and doctor up any substandard ejuices with, or just use it to make others stronger. i got the CHOPPER tank today and want to hear from anyone who has one, how to use it properly.. dont want to screw it up. waiting to hear from someone in go go nation!!!

ummmm, I can tell you how I use it but I'm not sure properly applies. You have a slotted or punched carto? If so, I fill the carto as usual and insert it into tank. Remove the little stopper and fill. Replace stopper. Blow through carto to make sure tube is clear and wipe. Attach to pv and enjoy. This works for me but it seems everyone has their own way of doing things.

 

[gormly]

ummmm, I can tell you how I use it but I'm not sure properly applies. You have a slotted or punched carto? If so, I fill the carto as usual and insert it into tank. Remove the little stopper and fill. Replace stopper. Blow through carto to make sure tube is clear and wipe. Attach to pv and enjoy. This works for me but it seems everyone has their own way of doing things.

Please do not prefill the carto... The tanks come with an empty carto punched and ready to go.
It works best by filling the tank and not the carto first.

The instructions are supposed to be sent with the order via PayPal, a link on the order form. is this not happening?

Here is the PDF:
http://www.go-gousa.com/ChoppersCycloneTank.pdf

Here is the text of the instructions:

Thank you for purchasing Chopper’s Cyclone Tank.
The first add on modification for the superior Go-go Cartomizer.
This modification of a standard Cartomizer increases the amount of liquid up to 5 or 7ml depending on
which size you have purchased.
Please note a few things to consider before starting with your Cyclone Tank.
1. Make sure you water wash out the tank prior to using, remove the little pop off rubber stopper and
submerge in filtered water, do not use soap or any other chemical agents, just clean fresh water will be
fine.
2. Let the Tank dry completely, the inner batting must be dry before you attempt to use the tank.
3. Do not attempt to clean the cartomizers, the method in which the tank is made may cause the fill to
be torn or damaged if it is removed, replacement cartomizers are available on the Go-goUSA.com
website.
4. Do NOT fill the cartomizers with liquid, let the tank do its job, filling the cartomizers before (or after)
filling the tank may cause the Cyclone to not work properly.
To use:
Remove the rubber stopper on the side of the tank.
Fill with your favorite liquid while it is on its side, do not fill vertically. Once you have filled the tank, put
the stopper back in and let it sit upright for a few minutes before starting to vape.
If you are purchasing replacement pre-punched cartomizers, please take care in removing the larger top
and bottom stoppers, too much force can damage the tank. We do not recommend you add different
juices to the tank as mixed flavors tend to muddle up the flavor and can be wrongly attributed to the
tank. To change flavors, simply vape until there is no more fluid in the tank and wash the tank as
instructed above.
Thank you again for purchasing Choppers Cyclone tank. We hope you enjoy it as much as we do.

 

[gormly]

all juices can be requested for extra flavor or less.. Just send me an email with the Order Number (quickly because I am pretty fast at filling orders) and just tell me if you want a little more, less or whatever, even a special flavor if wanted (I will try to make it, but it's on you if it's not as good as you'd hoped)

I think maybe I will use my second allotted thread to start a juice review section?

 

[texastumbleweed]

thanks so much. nope i didnt get instructions and the only link that was on the order form is for go-gousa.com...
is that the link that would have had it?but its ok, now i got the instructions. thanks! excited to try it. how long do you think it takes to completely dry?

Please do not prefill the carto... The tanks come with an empty carto punched and ready to go.
It works best by filling the tank and not the carto first.

The instructions are supposed to be sent with the order via PayPal, a link on the order form. is this not happening?

Here is the PDF:
http://www.go-gousa.com/ChoppersCycloneTank.pdf

Here is the text of the instructions:

Thank you for purchasing Chopper’s Cyclone Tank.
The first add on modification for the superior Go-go Cartomizer.
This modification of a standard Cartomizer increases the amount of liquid up to 5 or 7ml depending on
which size you have purchased.
Please note a few things to consider before starting with your Cyclone Tank.
1. Make sure you water wash out the tank prior to using, remove the little pop off rubber stopper and
submerge in filtered water, do not use soap or any other chemical agents, just clean fresh water will be
fine.
2. Let the Tank dry completely, the inner batting must be dry before you attempt to use the tank.
3. Do not attempt to clean the cartomizers, the method in which the tank is made may cause the fill to
be torn or damaged if it is removed, replacement cartomizers are available on the Go-goUSA.com
website.
4. Do NOT fill the cartomizers with liquid, let the tank do its job, filling the cartomizers before (or after)
filling the tank may cause the Cyclone to not work properly.
To use:
Remove the rubber stopper on the side of the tank.
Fill with your favorite liquid while it is on its side, do not fill vertically. Once you have filled the tank, put
the stopper back in and let it sit upright for a few minutes before starting to vape.
If you are purchasing replacement pre-punched cartomizers, please take care in removing the larger top
and bottom stoppers, too much force can damage the tank. We do not recommend you add different
juices to the tank as mixed flavors tend to muddle up the flavor and can be wrongly attributed to the
tank. To change flavors, simply vape until there is no more fluid in the tank and wash the tank as
instructed above.
Thank you again for purchasing Choppers Cyclone tank. We hope you enjoy it as much as we do.

 

[gormly]

We both use it daily and primarily. Any chance we'll see your version of it anytime soon?

I already have that... just not in production yet. All it is is an extra 1/2ml of pure cinnamon flavor. I am not a fan of dropping one flavor into a bottle and calling it my own. There just seems to be kind of a ripoff nature to that. Because anyone can do that, its the time and effort and money put into developing a balance of flavors that someone should have to pay for, not drip drip drip.

Like my Berry Flavors, they are not straight from the bottle flavors and I take some pride in that
and Lemonade is complicated... and I am SO happy people like it so much.

In fact I have a couple of flavors I want to put out but they have the exact names of some of the flavors that the flavor suppliers already sell in bulk... even though mine are a different combination, I got the same result, so it wouldn't be right for me to sell them.

Sweet Tarts is one example, I have a great sweet tart candy flavor that I adore, but you can just buy it straight from TFA, so there really is no point in me selling it, I'd feel like a ripoff artist.
Buy some VG and PG Nic mix (from me of course ) and then add a few ml's of the flavor.
Bang! Close enough to mine.

Back to cinnamon... a tip:
A little cinnamon tastes nice and hot, a little more cinnamon makes it go to a "fireball" level.
If you add the right amount of "sweetness" it goes from great to awesome.

Note: I am not suggesting the makers of AFB are doing this one flavor concoction, I am sure they put a lot of time into it, it's just that I can achieve the same thing with one single flavor. Have you noticed any other flavor notes in that liquid? Just curious, not being sarcastic.

My CinnaMint (I hated it at first has grown to be my #1) and it seems now that I am stuck on cinnamon flavors like some of you.


OK, back to the drubbing of the dolphins...

 

[gormly]

thanks so much. nope i didnt get instructions and the only link that was on the order form is for go-gousa.com...
is that the link that would have had it?but its ok, now i got the instructions. thanks! excited to try it. how long do you think it takes to completely dry?

I'd wait a day, that's what I did the second time and it was so much better than my first one You can accelerate the process by taking the carto out (and the plastic plug) and putting it in the over at a very low temp (very low) for an hour or so. The low heat will make it evaporate faster.