Official DiscountVapers.com Thread

[wendallb]

It's weird, where are all these people getting their stuff? I know I am the lowest price.. it's kind of odd. The good news is I got them for less, so this will be a profit item as I don't plan on lowering the price on that. (gotta have something right LOL)

The problem is a lot of folks that do only 510 stuff don't about discount vapers..

Maybe you need to post some prices on the forum not in this thread but one that will get noticed for something other than Go-go...Just thinking out loud...You can tell me to shut up..

WendallB

 

[GoodDog]

I imagine people are paying a lot more because they don't know about DiscountVapers yet so we need to get the word out. Some people are probably used to buying from the same vendors and don't shop prices. You're still pretty new and I think you've done a fantastic job in such a short time. Once you get your own forum that will also make a huge difference. Too bad it's such a long waiting list.

 

[GoodDog]

I've sent a couple of people also and then noticed you were out of the items I sent them to you for. I think it's more important that you stay stocked on your regular items than adding a bunch of new stuff. IMO

 

[K2lady]

Eric, any idea when tanks and replacement tank cartos will be available? I need to start buying holiday presents!

 

[gormly]

I've sent a couple of people also and then noticed you were out of the items I sent them to you for. I think it's more important that you stay stocked on your regular items than adding a bunch of new stuff. IMO

Very true, I've strayed a bit, but not much, I have been selling more recently so my stock has been up and down, the good news is that I've been replenishing most stuff before it's out.

The cones are an issue, I've had trouble getting them.
Go-go Cartomzers, batteries, drip tips (black, white and aluminum), cases, chargers and all adapters except for the Go-go to 510 all have been in full stock for over a month, so that's the basics. Plus some of my stock statuses online were incorrect, I updated it tonight, sorry about that. Just busy and didn't see it.

The adapters, well, you guys are killing me on those, every time I think I have enough.. bam.. I'm out. We know what happened with Chopper so there is an issue there but mostly it's my fault, I ordered the supplies for him but got the wrong type, so I had to reorder. With his very unfortunate recent troubles he could not afford to fill my last paid order with him so I was left without stock.
Most of the other stuff is in stock. Honestly the adapters and the 510/ego stuff is what I have a really hard time with. Never sure what to order...

The Chopper replacement cartomizers are in stock (and on sale)

I put the cyber monday deals up.
I may add more tomorrow.
I am sure there will be a huge order list in the morning, hopefully I have enough to go around.

Dual coil Cartos are on sale. I decided to forgo the profit on these to get them out there, so it's truly bare minimum on this item. If anyone purchased these in a 5 pack in the last day or so, I will make up for your loss.

Black and Stainless Kits are on sale
(the black kits are without cones)

Glass Drip tips on sale.
Cases, cartos and some other items also.

 

[jacquelyn]

I wish I new about the sale. I ordered 2 5 packs of boge and 2 dual cartos. If I new I totally would have done that. HMMM to make another purchase or not is the question

 

[gormly]

I wish I new about the sale. I ordered 2 5 packs of boge and 2 dual cartos. If I new I totally would have done that. HMMM to make another purchase or not is the question

sorry about that, it was a last minute thing
Remind me on your next order and I will give you an equivalent credit.

I'd do it now but I need some sleep...

 

[sonicdsl]

Even though it's not necessary for specials, as the other pointed out, we certainly appreciate your efforts! Gonna get me some more GGDCC's!! (just placed an order a few days ago, haven't tried 'em yet, but everyone's raving! )

 

[Spazmelda]

Ack! Eric, I sent you an email, but I'm going to post here as well.

I just placed an order for some stainless cartos before I realized they were prefilled. As you probably remember, I don't like the prefilled.

I hope you can cancel that order for me before you get it packed up. Or... if you happen to have any unfilled stainless cartos you could replace with those and go ahead and send the order.

 

[Bayemon]

Ok, the GGDCCs are ridiculous. I am still on my first one and it is performing like a champ. Given this kind of performance, I am sold on them even over the standard Go carts. The ROI is even better, which is just amazing.

 

[anncq]

The stainless steel cartos I got were empty.

Isn't there a pass through for the Gogo? If not, why isn't there? I need a pass through battery!
I love my Gogo and don't want an eGo pass through, I want a Gogo pass through!
Ann

 

[Vchick]

Thanks for a great sale Eric!

 

[robotevil]

Hey, I have a question for Chopper if he's around. I bought two of your tanks from a member who over-bought previously. So far these tanks work great. However, one of the tanks, the rubber plug that goes into the side to seal it up after you fill it, has gone bad. The best way I can explain it, is it's sort of degraded and falling apart. So it doesn't seal the tank properly which causes juice to overfill the carto and start leaking out the bottom. I sort of fixed this by putting a thin strip of duct tape around the bad rubber plug.

However, these plugs look like a standard size, like you can buy them from a hardware store, maybe? Are they custom made, or is there a certain sized rubber plug I can buy somewhere? If you can buy it in a hardware store, I was just curious on what size I should be asking for when I go in. Plus, Home Depot is so huge, I'm not even sure what section I would find these in.

 

[Spazmelda]

The stainless steel cartos I got were empty.

That would be great. Seems like I have a knack for getting prefilled no matter what I order though. LOL! Hopefully he's got some empty ones he can send me. That way I won't have to order again.

Oh, and it says they are pre-filled on the website, which is why I freaked out and asked for my order to be canceled.

 

[robotevil]

Isn't there a pass through for the Gogo? If not, why isn't there? I need a pass through battery!
I love my Gogo and don't want an eGo pass through, I want a Gogo pass through!
Ann

I'm going to try to take one of my old GoGo batteries and make a USB pass through. It should be fairly easy (in theory). I'll let everyone know how it goes... or if I burn my house down.

 

[Urge]

robotevil wrote...

However, these plugs look like a standard size, like you can buy them from a hardware store, maybe? Are they custom made, or is there a certain sized rubber plug I can buy somewhere?

The plugs are the plunger on a 3ml syringe. Here is a link to where you can buy them. Animal Health Express

they cost 18 cents each. I have noticed the same thing, the rubber on the stoppers degrades over time.

Urge

 

[Urge]

One of my GoGo batteries is acting weird. When you push down on the button the led lights up but no power is transferred to the carto. If I tap it or play with it a little sometimes it works. It seems to me that it is maybe a loose wire or maybe a bad solder joint on the circuit board. Anyone else have this issue? Were you able to fix it? I bought the battery in Aug. and I rotate 2 so it's not an end of life issue. Unfortunately, I only own 2 batteries and no backup system so I will have to wait 3-4 hours while my other battery charges before I can vape again. I guess I'm going to be shopping at Eric's place today.

The vaping Gods have not been smiling on me lately. I have a couple of Chopper's tanks and less than a week ago I put a brand new carto into the tank, filled it and was happily vaping for 2-3 days. I was going away to upstate NY for a couple of days so I filled it with juice and it was fine the first day but the next morning it was tasting very bad. 4-5 days on a new carto, I was using BWBs Applewood. I was getting weeks out of a carto before I needed to clean and rebuild it so I don't understand why this is happening?

Urge

Urge

 

[robotevil]

Urge, thanks for the tip. The funny thing I think I have some of those syringes in my pet draw (my dog was a rescue, and subsequently was sick most of his early life). I thought they looked familiar .

Also, the problems your having with your battery: See that middle center post on the battery? If you take a paper clip and put it through the holes on the side of the battery you can nudge that up a bit. Mind you, it doesn't take a whole lot of nudging, it's best if you barely move it, then test with your carto. If you nudge too far up, you'll strip the center-post from the wires that connect it to the battery.

What happens is, you'll have a carto that will protrude by a few 100ths of a CM extra than your regular cartomizers. That tiny bit of extra length is enough to push down the center post causing your other cartomizers to not work. So, if you nudge it, ever so slightly up, it will work again.

 

[Urge]

robotevil wrote...

If you take a paper clip and put it through the holes on the side of the battery you can nudge that up a bit. Mind you, it doesn't take a whole lot of nudging, it's best if you barely move it, then test with your carto.

I tried that already, it didn't help. If I hold both ends of the battery and push together while pushing the button and vaping it works. I think I need to take it apart and check out the electrical connections. I have dropped both of my batteries multiple times from leaving them in my shirt pocket. I think I might need one of those lanyards for my GoGo.

Urge

 

[Bayemon]

Isn't there a pass through for the Gogo? If not, why isn't there? I need a pass through battery!
I love my Gogo and don't want an eGo pass through, I want a Gogo pass through!
Ann

This one works great with a 510 to Go Go adapter. I love it.

USB Variable Voltage Passthrough