Official DiscountVapers.com Thread

[gormly]

I'm soooooo skeptical of 'tobacco' flavors. I think you should send out some 3 ml samples, then if it's as good as you say, be prepared to sell LOTS more

added: Just went to the site to mehbe buy a sample to try (would you sell me one? Don't buy vendors juices much and don't want to risk 30mls no matter how cheap it is) and the reviews say 'sweet'....what about an analog is sweet? I mean, has it been that long since y'all have lit up? lol!

Is it 'sweet'?

I don't think it's sweet

If you want to try a sample, order any sample available and just put in the note section that you want a tobacco.
However, I will only do an 8mg nic sample, not 18.

 

[gormly]

I'm just lifting up the rubber stopper, filling them about halfway, put the rubber stopper back on... then juice everywhere. I also tried just keeping the stopper there then filling down the center tube but that just goes straight through the whole thing out the other end...

center tube is a clear path to the other end... the center tube is for air only not liquid.

 

[gormly]

If you recall the smell of the cigarette when you pulled it out of the pack before you lit it, there's your sweet.

ahh, yep, that's right it does smell a bit like that.
wow it's been a long time for me almost 8 years lol, I can still remember the smell of a new pack.

 

[gormly]

I've been buying 100ml from the same vendor for almost 2 yrs now, he ships in dark plastic bottles with a single cap and I've never received a broken, cracked or leaking bottle ... he used to ship a nozzle cap for free, but added the option of no nozzle cap and reduced the price by a buck ... I transfer to glass bottles when it arrives ... it is definitely convenient for the customer and a time-saver for you, less small bottle filling, packing, labeling, shipping, etc ... I would buy 100ml bottles, how about 60 ml bottles too ?

btw, I did enjoy your tobacco vanilla

I'll order some bigger bottles tomorrow

 

[sonicdsl]

ahh, yep, that's right it does smell a bit like that.
wow it's been a long time for me almost 8 years lol, I can still remember the smell of a new pack.

Almost six months for me And definitely remember that smell! Ahhhh....

 

[Bostonsnboxers]

I'm still smoking 1 cig a day, just so I can stand the smell of my husband, who is still smoking 2 pks/day. No 'packs' here though...for me it would be a freshly opened 'bag' (ryo).

 

[Krispers]

I was still smoking til Brutus gave me a 1.7 smoktech xl

 

[sonicdsl]

I was still smoking til Brutus gave me a 1.7 smoktech xl

uh-huh, so that's what you're calling it?

 

[Krispers]

Yeah I can't handle more than 1.7

 

[GoodDog]

I like the XXXLs better.

 

[txtumbleweed]

I'm just lifting up the rubber stopper, filling them about halfway, put the rubber stopper back on... then juice everywhere. I also tried just keeping the stopper there then filling down the center tube but that just goes straight through the whole thing out the other end...

I remove the mouthpiece and insert the the syringe in one of the two small holes. I don't remove or mess with the inner stopper. I've never used with ce2 type cartos before these but the people over on one of the vision or ce2 threads could probably tell you how to stop the leaking they are constantly modding and fiddleing with them. I'm sure it probably has something to do with the alignment of the stopper.

 

[bbb]

another story of typically great DiscountVapers customer service

last Sun night, my Infinity Pro failed and had to be sent back to California for repair ... all I had for backup were several very old Joye big batts ... using them with 3 ohm clearomizers/carts was awful ... all I had to vape was some good organic juice, Erics included, that just didn't taste right at low volts, I was wasting it trying to vape it ... after 4 days of this, I realized I needed a better backup, asap ... I was about ready to go buy a couple good cigars, as I thought there would be no quality vaping for me this wknd

I called Eric late Thurs afternoon, he returned my call around 5pm ... after explaining my situation, I bought a vv XL3, Eric graciously swapped out the top cap for the newer, improved xl3 mini top cap ... this gave me a 4th volt range option, up to 4.2v, using (2) ICR123A batteries, Eric actually tested this while we were on the phone ... I also bought a single XSL 18650 ... Eric made sure all were fully charged, he got it all packaged, labeled and dropped off, USPS Express, I even got my shipping update that Thurs night

USPS Express doesn't mean next day, but it does means 2 day guaranteed ... I got it all early Saturday afternoon ... with the stacked batts I can vape @ 4.2v and with the single 18650 @ 3.7, I didn't multimeter test ... but my juices certainly taste better, and I can now patiently wait for my Infinity Pro, in peaceful and satisfying vaping with my new backup hardware ... thanks to Eric

btw, I mistakenly ordered (and paid for) only 1 ICR123A battery ... Eric shipped 2, said to make it up on my next order, I shall do so

how cool is that ?

 

[sonicdsl]

another story of typically great DiscountVapers customer service

last Sun night, my Infinity Pro failed and had to be sent back to California for repair ... all I had for backup were several very old Joye big batts ... using them with 3 ohm clearomizers/carts was awful ... all I had to vape was some good organic juice, Erics included, that just didn't taste right at low volts, I was wasting it trying to vape it ... after 4 days of this, I realized I needed a better backup, asap ... I was about ready to go buy a couple good cigars, as I thought there would be no quality vaping for me this wknd

I called Eric late Thurs afternoon, he returned my call around 5pm ... after explaining my situation, I bought a vv XL3, Eric graciously swapped out the top cap for the newer, improved xl3 mini top cap ... this gave me a 4th volt range option, up to 4.2v, using (2) ICR123A batteries, Eric actually tested this while we were on the phone ... I also bought a single XSL 18650 ... Eric made sure all were fully charged, he got it all packaged, labeled and dropped off, USPS Express, I even got my shipping update that Thurs night

USPS Express doesn't mean next day, but it does means 2 day guaranteed ... I got it all early Saturday afternoon ... with the stacked batts I can vape @ 4.2v and with the single 18650 @ 3.7, I didn't multimeter test ... but my juices certainly taste better, and I can now patiently wait for my Infinity Pro, in peaceful and satisfying vaping with my new backup hardware ... thanks to Eric

btw, I mistakenly ordered (and paid for) only 1 ICR123A battery ... Eric shipped 2, said to make it up on my next order, I shall do so

how cool is that ?

Yes, Eric is definitely one of the best suppliers! I think it's because he knows how to relate to the customers so well!

 

[bbb]

relate, schmelate ... I'm just a cranky old retired guy who smoked for 40 years

I don't relate to anybody still living

now get off my lawn

darn kids nowadays


;-)

 

[gormly]

couple of pics of my "stash" and some projects with my son:

 

[Devonmoonshire]

couple of pics of my "stash" and some projects with my son:

WOW Bro, is this an actual working Mod????

The other Go Go Holder came out awesome Brother!!!

Nate aka Darth Vapor

 

[gormly]

WOW Bro, is this an actual working Mod????

The other Go Go Holder came out awesome Brother!!!

Nate aka Darth Vapor

Yes, it's working It forms fits my hand perfectly.

Things to do when I am waiting for Go-go stock to come back in...

 

[Devonmoonshire]

Yes, it's working It forms fits my hand perfectly.

Things to do when I am waiting for Go-go stock to come back in...

That is awesome work Brother, You know eventually if you keep putting up eye candy like this You are going to have to start making either them or the instructions on how to make them available

Oiy the weather here is amazing today

Nate aka Darth Vapor

 

[gormly]

That is awesome work Brother, You know eventually if you keep putting up eye candy like this You are going to have to start making either them or the instructions on how to make them available

Oiy the weather here is amazing today

Nate aka Darth Vapor

LOL true.

Both were sculpted with "Sculptey Clay" and then baked for an hour at 275. Then primed, dried, painted with acrylic paint, baked for the same amount of time again, then clear acrylic.

The hand held one is going to go through the process about a half dozen more times so I can get a 3D paint scape, depth of color and things like that.

Easy

 

[Tgirl]

Hi Eric,

Yesterday I washed 3 of your Go-go clear tube carto thingies, it was so easy! I filled one up with juice but am only getting weak vapour, it's as if it's not firing properly. I tried it on my other Go-go and it didn't do any better. Do you know what is causing it, could I have done something wrong? The filling is properly saturated, and there's no liquid in the air tube.

Thanks,

Tgirl