Official DiscountVapers.com Thread
- Thread starter gormly
- Start date
- th_trl_thread_readers 0
- Status
The Segelei VV Tube does, it's the V8 in a tube, same company same modulation, LD confirmed this with me today (right LD??)
Segelei Variable Voltage Tube
Yes, but in fairness I hosed myself by not buying direct from Vision.
summer haircut:
LOL
after years of dying my premature gray I found out exactly how much gray there is and it's like 80%
LOL
after years of dying my premature gray I found out exactly how much gray there is and it's like 80%
The GRIPPER is also PWM.
The display reading is very accurate on the GRIPPER with respect to the Average Voltage Output.
RodeoGeorge
Looks Wonderful Too !summer haircut:
LOL
after years of dying my premature gray I found out exactly how much gray there is and it's like 80%
summer haircut:
LOL
after years of dying my premature gray I found out exactly how much gray there is and it's like 80%
Most people can't do the shaved head look. Consider yourself lucky!
Sent from my Nexus 7 using Tapatalk 2
Just another shout out for another lightening fast, and complete shipment.
Like the extra large eGo case. Works perfect for my new collection of Segelie tanks with room to spare for a few 18350's.
Once again, I'm impressed with the value on the Segelie tank, carto, drip tip combo. I have three in rotation. One with thick 100%VG, a 70/30 blend, and one with 100% PG. All work and wick nicely regardless of viscosity.
Drip tips are rather loose, and need a larger o-ring. Considering the DT as a freebie, so not an issue whatsoever.
All three measure 2.6ohms, not 1.6 ohms. Perfect for what I want them for, as I do not want LR. Hope Eric stocks the same carto in the future.
Like the extra large eGo case. Works perfect for my new collection of Segelie tanks with room to spare for a few 18350's.
Once again, I'm impressed with the value on the Segelie tank, carto, drip tip combo. I have three in rotation. One with thick 100%VG, a 70/30 blend, and one with 100% PG. All work and wick nicely regardless of viscosity.
Drip tips are rather loose, and need a larger o-ring. Considering the DT as a freebie, so not an issue whatsoever.
All three measure 2.6ohms, not 1.6 ohms. Perfect for what I want them for, as I do not want LR. Hope Eric stocks the same carto in the future.
The Selegei V8 and the Selegei VV meter identically.
The Gripper is both PWM and constant. It starts off as a PWM at lower voltages, and tops out at constant voltages.
summer haircut:
LOL
after years of dying my premature gray I found out exactly how much gray there is and it's like 80%
don't u feel liberated now ? looks good the new doo !
LD, I have to disagree with you on this one. At a setting of 5.9 on the GRIPPER, the Duty Cycle of the output is 98.3%, which is sufficient to cause an Analog Voltmeter to display a constant voltage even though there is a 1.7% OFF time. At a setting of 6.0 on the GRIPPER, there is no duty cycle and the output is continuous.
Anything below the 6.0 setting on the GRIPPER is PWM, and ONLY the 6.0 setting is a constant output.
RodeoGeorge
Are the universal coils which are showing on the site now, the ones I need to order for the mini vivi nova?
I know that the ones you had were not compatible with the mini vivi nova and you put a notice up with them stating
that they didn't fit the mini vivi, but I don't see that notice now.
I want to make sure I order the right things so everything fits .
Universal Clearomizer Coil Head
I know that the ones you had were not compatible with the mini vivi nova and you put a notice up with them stating
that they didn't fit the mini vivi, but I don't see that notice now.
I want to make sure I order the right things so everything fits .
Universal Clearomizer Coil Head
George,
Buddy!!! I'm so glad your back. I like our discussions.
It really is dual mode. With a low ohm atty, this trigger happens at 4.8V, sometimes lower. And, it shows as constant (no duty) on the oscilloscope (you know I don't rely on analog meters). So, i asked Smoktech abou this, since I had never seen this before, and they verified that it is dual mode. You will need to test it under load to see this, since I think it is an amp limit that triggers this.
Now, I thought you watched my reviews.
Catch me on Skype tomorrow night, and I can show you this on the Nano.
Last edited:
Crap forgot to change the description on the short wicks
No not compatible, they are the same size as the long wicks and will not fit.
LD, touchee, I think. LOL
I did not perform the first tests under load.
Since I didn't want to fry coils, you made me go digging through my parts bins to find a 2.2 Ohm 25 Watt Resistor as a load on the test rig.
I can see that at a setting of 5.1 and above it is definitely a DC Output. Sometimes a slight drop pulse, but for the most part DC.
Between 4.8 and 5.1 the NANO shows some weird results. Duty Cycle actually goes down, P-P Voltage goes up, and the Average Voltage remains pretty much what is set on the GRIPPER. Like it's possibly changing between PWM and Constant Output.
Now that I've analyzed the living crap out of it, and fried a T2 because I forgot to lower the setting from 6.0 after the first test (LOL), the results are:
Who cares. Set it at 3.3, put a LR T2 on it, and vape like crazy.
On my way to another Rodeo tomorrow, and will be gone 2-1/2 weeks. I'll try to catch you on Skype when I get back.
RodeoGeorge
I did not perform the first tests under load.
Since I didn't want to fry coils, you made me go digging through my parts bins to find a 2.2 Ohm 25 Watt Resistor as a load on the test rig.
I can see that at a setting of 5.1 and above it is definitely a DC Output. Sometimes a slight drop pulse, but for the most part DC.
Between 4.8 and 5.1 the NANO shows some weird results. Duty Cycle actually goes down, P-P Voltage goes up, and the Average Voltage remains pretty much what is set on the GRIPPER. Like it's possibly changing between PWM and Constant Output.
Now that I've analyzed the living crap out of it, and fried a T2 because I forgot to lower the setting from 6.0 after the first test (LOL), the results are:
Who cares. Set it at 3.3, put a LR T2 on it, and vape like crazy.
On my way to another Rodeo tomorrow, and will be gone 2-1/2 weeks. I'll try to catch you on Skype when I get back.
RodeoGeorge
Same here, Eric. Got the new batteries and T2s, already charged and vaping beautifully. I forgot how much I like the warm vape off these LR T2s. And they work great on my thread-stripped eGo batts. ;-)
Wow, heading out again? You are one busy man!
Sorry to hear about your T2. Luckily the heads are inexpensive. What a great vape though!
Smok did an amazing job on the electronics for the Gripper. It's like, it hits hard... but never too hard... like other PWM devices. I love mine. It sounds like you love yours too.
Have a good time at the rodeo, and I will catch you when you get back.
- Status
Similar threads
- Locked
