Official DiscountVapers.com Thread

[VapDrak]

I may second Rodeo George here. I'm really interested if somebody could give some opinions of the Uniq Lava 3.0.
Hey George, whats your opinion of the VMax? Do you already have one or do you prefer the Lava?
I'm nosy because already thinking what to put in my September order... and August-order isn't even here yet

 

[KalebK]

I am curious to know the answer to the Uniq question as well! I have searched for it on YouTube and came up with nothing! Something I have been pondering for a few days and would like all you smart peoples input:

I have decided to switch to clearomizers completely for now, since Boges have been not so awesome as of lately. The issue I am having is changing flavors in clearomizers! I know there must be a way without alcohol right? I am an alcoholic so I like to stay as far away from the stuff as I can! I know I have asked this before and was told soaking the wicks in PGA is another good way to alleviate the previous flavor, but Ido not DIY, therefore I have no PGA either! I just got a batch of clearos (two vivi novas, one kanger t2 and 3 thor's). I havent opened one if the Vivis yet or any of the Thors, and just today I decided I wanted a different flavor in my Nova (I switch flavors often!!!) and there was less than 1 ml still left of Crunchy Berries from FSUSA and I just topped it off with Caramel Cappucino from vape-a-Licous. Even with less than 1 ml of the first juice that was left in it, I still taste it!!! I would really appreciate input on this, thanks!!!

 

[WA3PNT]

Kaleb, I've known Bill W for 33 years.

I'm really getting hooked on the T2s. I've changed juices in one several times. I just take the coil assembly off, take the rubber cap and metal top piece off, and clean everything in hot water (just faucet temperature). Dry everything, blotting the wicks several times with a dry tissue, blowout the main tube, stick a tissue down in the main tube to get most of the moisture out, reassemble, and fill with new juice. I do not wait for everything to "completely" dry, and have had good luck.

VapDrak,

Don't have a VMax. I think that's the unit that uses 2 18350 batteries stacked. The only 18350 devices that I have are the V8s. Only have 8 28350 batteries, but have 28 18650s, so I tend to lean toward the 18650 devices. The Uniq 3.0 appears to be pretty much like the Lava 1.5 that I have, with the exception of the deeper well, and that's what I'm after to eliminate the adapters.

RodeoGeorge

 

[Big Screen D]

kalebk07

A good rinse out with hot water works quite well. Not as good as PGA, but work's for all but the most persistent flavors.

Just take everything apart, and rinse out under hot running water. Use a little unscented tissue paper to blot the wick dry, and dry burn. Prime the wick with a drop of juice, fill, let sit for a few minutes and vape on.

 

[WA3PNT]

I may second Rodeo George here. I'm really interested if somebody could give some opinions of the Uniq Lava 3.0.
Hey George, whats your opinion of the VMax? Do you already have one or do you prefer the Lava?
I'm nosy because already thinking what to put in my September order... and August-order isn't even here yet

I'm going to order another GRIPPER when they come in, hopefully very early next week, as I'm off to another Rodeo on Tuesday. I'm also thinking of adding a Uniq 3.0 to the order if we get answers to the questions I've posted.

RodeoGeorge

 

[VapDrak]

Kaleb, I've known Bill W for 33 years.

I'm really getting hooked on the T2s. I've changed juices in one several times. I just take the coil assembly off, take the rubber cap and metal top piece off, and clean everything in hot water (just faucet temperature). Dry everything, blotting the wicks several times with a dry tissue, blowout the main tube, stick a tissue down in the main tube to get most of the moisture out, reassemble, and fill with new juice. I do not wait for everything to "completely" dry, and have had good luck.

VapDrak,

Don't have a VMax. I think that's the unit that uses 2 18350 batteries stacked. The only 18350 devices that I have are the V8s. Only have 8 28350 batteries, but have 28 18650s, so I tend to lean toward the 18650 devices. The Uniq 3.0 appears to be pretty much like the Lava 1.5 that I have, with the exception of the deeper well, and that's what I'm after to eliminate the adapters.

RodeoGeorge

Thank you, I will investigate the Lava 1.5 ... sometimes it is really overhelming to make choices in the Vape World!

 

[WA3PNT]

Thank you, I will investigate the Lava 1.5 ... sometimes it is really overhelming to make choices in the Vape World!

I do not recommend the Lava 1.5, and don't even know if they are still available. That was a while back, and was an impulse buy. They're "okay", but much better things on the market now.

RodeoGeorge

 

[gormly]

The Uniq question.

They (Uniq) say they make it. Could it be a young-june, yes. Could it be an LRider, yes but I doubt it.
These guys lie.. a lot. I usually but one of something from a company and if it seems legit and works I buy more.
To me it doesn't matter too much who manufactures it (as long as I say who it is) and it works properly and doesn't seem like shoddy workmanship. The Uniq (Chrome) version seems a lot better than the original or even the more recent Lava from LRider. I have thrown a lot at it so far and it works pretty well.

I LOVE the deep well on this thing (the chrome one) it is big enough to just fit a kanger (but doesn't screw on ) so you'd still need a shorty extension, but it fits the CE4/CE5 nicely.

When it is powered on it flashes 3 times (nothing just flashes) then comes the resistance and then the voltage and it has the battery indicator on the side.

I have tried several times to get a clear picture of it and I haven't been able to

OK got one, sort of, this picture makes it looks terrible but trust me it does not look this crappy, it's smooth and looks right, the artifacting of the camera and my fingerprints are making it look weird

 

[WA3PNT]

Thank you Eric. You just sealed the deal. I'll PM you on a favor regarding the Gripper arrival.

RodeoGeorge

 

[LordDavon]

I'm going to order another GRIPPER when they come in, hopefully very early next week, as I'm off to another Rodeo on Tuesday. I'm also thinking of adding a Uniq 3.0 to the order if we get answers to the questions I've posted.

RodeoGeorge

My friend, you need to slow down with these rodeos a bit, and concentrate on these vapers. I can't do it all alone!!!

 

[LordDavon]

The Uniq question.

They (Uniq) say they make it. Could it be a young-june, yes. Could it be an LRider, yes but I doubt it.
These guys lie.. a lot. I usually but one of something from a company and if it seems legit and works I buy more.
To me it doesn't matter too much who manufactures it (as long as I say who it is) and it works properly and doesn't seem like shoddy workmanship. The Uniq (Chrome) version seems a lot better than the original or even the more recent Lava from LRider. I have thrown a lot at it so far and it works pretty well.

I LOVE the deep well on this thing (the chrome one) it is big enough to just fit a kanger (but doesn't screw on ) so you'd still need a shorty extension, but it fits the CE4/CE5 nicely.

When it is powered on it flashes 3 times (nothing just flashes) then comes the resistance and then the voltage and it has the battery indicator on the side.

I have tried several times to get a clear picture of it and I haven't been able to

OK got one, sort of, this picture makes it looks terrible but trust me it does not look this crappy, it's smooth and looks right, the artifacting of the camera and my fingerprints are making it look weird

That does look identical to my YoungJune 1.5T. I can't say for sure, since I don't have one... but maybe I will order one on Monday.

 

[sandybeach]

\I'm still using the original heads....some for over 3 months now....have only had to replace one in that time. I don't use the LR ones....don't know if that makes a difference.

Diva we gotta do that swap.

 

[Zooker]

Man everyone seems to be loving the T2's, what in the world am I doing wrong. I've swapped flavors, changed voltage, I swirl and I tip--I'm getting good vapor, but it tastes awful. I love stardusts and the Thors work pretty good for me, I don't know why I"m having an issue with these. whaaaaaaaaahhhhh....ok done crying for now.

 

[WA3PNT]

Man everyone seems to be loving the T2's, what in the world am I doing wrong. I've swapped flavors, changed voltage, I swirl and I tip--I'm getting good vapor, but it tastes awful. I love stardusts and the Thors work pretty good for me, I don't know why I"m having an issue with these. whaaaaaaaaahhhhh....ok done crying for now.

I did get a harsh hit from a T2 a while back, and found that the voltage on my PV was up too high.

Suggest starting on the lowest setting, and working up.

I use a setting of 3.3 on my GRIPPERS, and 4.0 on my Provari, with a T2 Coil Resistance of 2.2 to 2.5

Hope this might help

RodeoGeorge

 

[Zooker]

I did get a harsh hit from a T2 a while back, and found that the voltage on my PV was up too high.

Suggest starting on the lowest setting, and working up.

I use a setting of 3.3 on my GRIPPERS, and 4.0 on my Provari, with a T2 Coil Resistance of 2.2 to 2.5

Hope this might help

RodeoGeorge

Thank you, I did order extra heads for mine, I don't remember what ohms they are right off hand, but the one on my Provari right now is a 2.8ohm, and I have it at 3.8 volts right now, should I go even lower? This thing is making me crazy--oddly enough, it seems to taste fairly decent on my little 350-mah ego mini battery, which completely baffles me. I'll try turning the power down some more on my Provari for now.

 

[KalebK]

Kaleb, I've known Bill W for 33 years.

I'm really getting hooked on the T2s. I've changed juices in one several times. I just take the coil assembly off, take the rubber cap and metal top piece off, and clean everything in hot water (just faucet temperature). Dry everything, blotting the wicks several times with a dry tissue, blowout the main tube, stick a tissue down in the main tube to get most of the moisture out, reassemble, and fill with new juice. I do not wait for everything to "completely" dry, and have had good luck.


VapDrak,

Don't have a VMax. I think that's the unit that uses 2 18350 batteries stacked. The only 18350 devices that I have are the V8s. Only have 8 28350 batteries, but have 28 18650s, so I tend to lean toward the 18650 devices. The Uniq 3.0 appears to be pretty much like the Lava 1.5 that I have, with the exception of the deeper well, and that's what I'm after to eliminate the adapters.

RodeoGeorge

Thank you for your input! Who is Bill W?? Lol.

 

[KalebK]

kalebk07

A good rinse out with hot water works quite well. Not as good as PGA, but work's for all but the most persistent flavors.

Just take everything apart, and rinse out under hot running water. Use a little unscented tissue paper to blot the wick dry, and dry burn. Prime the wick with a drop of juice, fill, let sit for a few minutes and vape on.

Thanks you Big Screen D!

 

[MarissaKW]

Eric,
Sorry you have been having issues with your suppliers. But I did recently order one of your "vivi" 2.5s. I have to say that I do love it. I have never used a vivi nova before so I cannot compare it to that, but I used it all weekend and it worked fantastically. I cleaned it tonight and it cleaned well. The only issue I have had so far is the o ring in the bottom popped out and it took a while to get back in. So I will probably order a few more, vision or not! Thanks for all of your hard work and I hope things get worked out soon. If not I think you should keep supplying these versions, they are pretty darn good!

 

[txtumbleweed]

That does look identical to my YoungJune 1.5T. I can't say for sure, since I don't have one... but maybe I will order one on Monday.

I read a post a couple of months ago how uniq and Young June are related somehow but I forget how that is. I'm pretty sure the Uniq version and the Young June are the same PV.

 

[Woody-GC]

Man everyone seems to be loving the T2's, what in the world am I doing wrong. I've swapped flavors, changed voltage, I swirl and I tip--I'm getting good vapor, but it tastes awful. I love stardusts and the Thors work pretty good for me, I don't know why I"m having an issue with these. whaaaaaaaaahhhhh....ok done crying for now.

Zooker I had troubles with one of my T2's to start with. I had removed the silicone sleeve from the top of the coil to see what it looked like and then reinstalled the sleeve back onto the head and pushed the sleeve as far as I could down onto the wicks. I think it cut the flow of liquid into the coil as I couldn't turn the power low enough to eliminate the burnt taste. I readjusted the sleeve off of the wicks a tiny bit and the problem disappeared. Try that and hopefully it may be your problem.