Official ProVari 3 Thread - P3 *PART 2*

Status
Not open for further replies.

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,963
182,720
Midworld
I just learned a new word. I have learned a few lately and think I should start posting them here as they come up. Not that I think anyone cares, but this give me a good place to store them when I wanted to look back.

vituperative

That's one of my nics...

And sorry about the drunk-dial-interruptus. Caretaking duties done and I'm in "sit" mode for approx. 30 minutes (until I preppie doggie for a vet appointment).

But only if you're not vituperative at the moment. ;)
 
Last edited:

The Ocelot

Psychopomp
ECF Veteran
Verified Member
Aug 12, 2012
26,497
79,193
The Clock Barrens, Fillory
That's one of nics...

And sorry about the drunk-dial-interruptus. Caretaking duties done and I'm in "sit" mode for approx. 30 minutes (until I preppie doggie for a vet appointment).

But only if you're not vituperative at the moment. ;)

tag, you're it.
 

rbrylawski

Sir Rod - MOL
ECF Veteran
Verified Member
Jul 11, 2014
8,211
34,162
Tampa, FL
Morning All. It's going to be another rainy dreary day in the Sunshine State. The family day yesterday was nicer than imagined. My cousin's husband was unusually friendly. Maybe he took a nice pill? Today it's a day with my brother and SIL, having our weddings rings in for their 6 month, check-up, clean and polish. In order to maintain their warranty, we have to take them in every 6 months. The benefit is they'll be cleaned and polish to brand new. They of course hope getting us in the store will encourage us to buy more stuff.

Have a great Sunday everyone!
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
187,930
Nah, the soil in Florida is sand, so the water sinks in pretty quickly. Besides if an Ark was needed and the water rose to the 9th floor of our condo, it's over for most of us anyway.......:(
I'd consider diving in by the time it got to the second floor. Get it over with.
 
  • Like
Reactions: DPLongo22

cllmda

Super Member
ECF Veteran
Verified Member
Hi :)

Im very disappointed....

I purchased a P3 Titanium mid july as a bday prez to myself after reading great things about the Provari for the past ten yrs on the forums...cost me nearly 300$ (Im in Europe) and am already having a problem=not working!

I keep getting
=
"Problem = output too high or bad atty [19]
FIX= reduce volts/watts or replace atty"

I use a mini nautilus with a 1.6 ohm atomizer and vape at 9.6 watts

Tried changing everything : same prob with 4 other mini nautilus', with Kangertech mini aerotank 1.5ohms .All these work fine on other devices;

Just for the sake of it I reduced wattage to the minimum 3W =still getting that same message........

Im REALLY upset about this . I bought this expensive P3 because i THOUGHT i was buying quality, something that would LAST, that was DEPENDABLE!

My 30-50$ Eleaf Istick 30w & 50w devices are still going STRONG after 8+months of intense usage .I carry my Isticks and Sigelei's around with me all day, theyve been through everything, but my P3 Titanium stays at HOME, only to be used in my living room, didnt even take it on vacation with me this summer (so u can knock three weeks off the 2 months ive had it!) .WHY ? so as to make sure it got no rough treatment, didnt get lost or damaged...ha!


Im jus soooooo :(...
The dealer i purchased it from doesnt suggest anything apart from sending it back to him -at my expense- so that he can send it back to the States to Provape for repair.He told me to expect a MINIMUM of six weeks...So thats great! Not even two months with my 300$ Provari and I have to be without for two months ...??,

Anybody have any suggestions I could TRY before having to resort to returning it to the repair-shop ?

id sure appreciate any ideas/input...
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
187,930
Anybody have any suggestions I could TRY before having to resort to returning it to the repair-shop ?
clinda, we can sit here and have you try this and try that. But the best people to help you are Provape people themselves. Go to their website and fill out a ticket. Explain your issue. If they feel they have a fix they'll give you things to try. If they feel something is wrong with your P3 then you will have to send it in. They will either fix/return your P3 or will replace it if it is under warranty. Far more often than not you end up with a better result than what you anticipate.

Try this link. They're good about getting back to you.

https://provape.zendesk.com/anonymous_requests/new
 

rbrylawski

Sir Rod - MOL
ECF Veteran
Verified Member
Jul 11, 2014
8,211
34,162
Tampa, FL
Clinda, Bronze speaks the truth. I'm sorry you're having an issue, but there is no mod maker on the planet who will work harder to ensure your device is working right and they will treat you far better than just about anyone out there. Yes they will.
 
Last edited:

rbrylawski

Sir Rod - MOL
ECF Veteran
Verified Member
Jul 11, 2014
8,211
34,162
Tampa, FL
Hey everyone......sorry for being MIA. The weekend was tied up with family non-stop and today was a tough work day. Plus I'm not feeling that well. Charlie has a cold and I seem to have picked up some intestinal bug. Not fun in any sense that's for sure.

I did get some good news today. My new car, which wasn't supposed to be built yet, somehow got built early and showed up at the dealer today. Charlie just happened to be there taking an extended test drive on the car we ordered for him. His car isn't supposed to be built until the first week of October, but I'm hoping it comes sooner. We figured we had a few weeks to put our finances in order as this time, we're paying cash for them and not have a lease or car payment. The money won't be accessible until next week, so my new car has to sit there at least until then. I may just wait until Charlie's car comes in and we'll get both at the same time. At any rate, it was staring to rain, so Charlie only snapped two pictures.

And uh, thank you my dear Kat for reorienting the picture for me!

IMG_2084.JPG
IMG_2085.JPG
 

Attachments

  • IMG_2084.JPG
    IMG_2084.JPG
    585.9 KB · Views: 24
Last edited:

Katdarling

I'm still here on ECF... sort of. ;)
Supporting Member
ECF Veteran
Verified Member
Jan 25, 2011
32,581
167,741
Utopia
cllmda, you're obviously frustrated, and who wouldn't be!!

I agree with the suggestions to immediately contact Provape. I'm not sure anyone in this thread will have THE answer, tho it is possible. Provape will either walk you thru a fix, or yes, you'd have to send it in, but I'm guessing you could do that directly, and not have to go third hand thru your vendor.

It must be incredibly unsettling for you, and we can feel it thru your post.

Will you please let us all know the outcome?
 
Status
Not open for further replies.

Users who are viewing this thread