Official ProVari 3 Thread - P3

Status
Not open for further replies.

Riverboat

Vaping Master
ECF Veteran
Verified Member
Feb 15, 2012
4,014
3,111
Arizona
I am sticking to my guns we are months away from launch day..... IMO there are still a few tweaks to work out... Menu system-maybe? Penny tight atty connection ? I still think reverse threads would be the way to go.... As long as the P3 has been in the works it should be near perfect, after all it is a Provari. :)

Nah, not buying your months away hypothesis. The holiday's are coming up and it seems to me Provape fully intends to have P3's in our stockings this year. That means B&M launch in the coming weeks and online sales in time for Santa.

Care to wager a gentleman's bet??


Hello,
There is also the following to consider on the timeline:

Anytime we make software changes it can add 1-2 months to the development cycle; to make code changes, design changes and further testing to make sure those changes did not interfere with other features.

while it feels like a long time, it's really not been that long considering everything we have had to do along the way. It just feels longer when you are waiting. :)

It's like watching grass grow , but we are putting fertilizer on the turf.
Like I said months away...... I am waiting for the P3.5 Titanium version:laugh:
 
Last edited:

dailywalker

Super Member
ECF Veteran
Verified Member
Jul 24, 2013
334
490
Fantastica
A possible release by Black Friday?
I am hoping that when they finally release the P3 it will be available in polished stainless.
I know nothing new here for me to report. The P3 just works excellent!

I just love the P3.
Thank You Provape! I dig my P3!

Still saving for A Polished Stainless P3!

Thought about a Reo but Hopefully soon I can have a P3 Polished Stainless instead!

vape Happy! vape ON!:vapor:
 

brickfollett

Ultra Member
ECF Veteran
Verified Member
Oct 25, 2013
1,357
1,167
Washington
A possible release by Black Friday?
I am hoping that when they finally release the P3 it will be available in polished stainless.
I know nothing new here for me to report. The P3 just works excellent!

I just love the P3.
Thank You Provape! I dig my P3!

Still saving for A Polished Stainless P3!

Thought about a Reo but Hopefully soon I can have a P3 Polished Stainless instead!

Vape Happy! Vape ON!:vapor:
A reo will make it hard for you to love much else! Mine has been my go to device since it showed up at my doorstep. I just have such a nostalgia going for my old provari, and the p3 will fix that. I may even pick up another Pyrex rsst for it because I really love using that on my 2.5
 

dam718

Ultra Member
ECF Veteran
Verified Member
Dec 30, 2012
1,797
2,268
Hawaii
I too was thinking, and am hoping for an online release by Christmas as that's when SWMBO loosens the purse-strings a bit. Faling that, an early FEB release for my Birthday perhaps?

I am wondering about the new iTaste SVP2.0 - maybe to hold of the jitters?

That iTaste SVD 2 is a nice looking piece. I'll probably get one myself to hold me over til the P3 is available online


Sent from my iPhone using Tapatalk
 

Jazzman

Super Member
ECF Veteran
Verified Member
Dec 24, 2013
947
2,115
High Desert, CA
Is anyone using 18350 batteries getting more than 90% on the battery meter? I have a brand new AW and only get about 85% on the battery meter and a poor IQ rating.

I ran into a poor IQ problem on a friends P3 last week. Very poor performance and would hardly vape at all. I checked the IQ and it was at 27. I tried the battery in my P3 and it showed 86 IQ and vaped great. I stretched her spring just a little and no difference. Then I cleaned the threads and the IQ jumped to 83 and the P3 vaped great again. The P3 seems to be very sensitive to thread contact and a little cleaning seems to make a big difference in IQ, so I would try cleaning the threads and see if that helps. I just used a little alcohol to clean my friends threads and that was all it took. It has been vaping great since the cleaning. I haven't seen her again yet to put some Noalox on, but just the cleaning seemed to do the trick. Give it a try and don't forget to clean the threads for the 510 ring also.
 
Like everyone else I am Super excited about the Provari 3! I've been off analogs for two months and was planning on purchasing it for a kind of reward for quitting on Christmas. Instead I got lucky and won one from an online contest, just have to wait for its release. Was curious to know if anyone has heard anything recently about its launch. I've read through the entire thread and so far it's still playing by ear for info?
 
Last edited:

Robino1

Resting in Peace
ECF Veteran
Sep 7, 2012
27,447
110,405
Treasure Coast, Florida
17.gif


Still waiting on lauches date news
 

frazz

Super Member
ECF Veteran
Verified Member
Jan 15, 2010
465
316
Rhode Island
Like everyone else I am Super excited about the Provari 3! I've been off analogs for two months and was planning on purchasing it for a kind of reward for quitting on Christmas. Instead I got lucky and won one from an online contest, just have to wait for its release. Was curious to know if anyone has heard anything recently about its launch. I've read through the entire thread and so far it's still playing by ear for info?

Congrats on winning one!
 
Status
Not open for further replies.

Users who are viewing this thread