Official ProVari 3 Thread - P3

Status
Not open for further replies.

rbrylawski

Sir Rod - MOL
ECF Veteran
Verified Member
Jul 11, 2014
8,211
34,162
Tampa, FL
Happy Thanksgiving to all who purchased a P3 or are getting a P3. Mine is headed to NC with a bunch of batteries, charger just in case, coils, tanks, and plenty of juice. Gosh no room for the darn turkey. Be safe everyone.

Edit: Almost forgot two 2.5's just in case of a breakdown.

Did someone win the lottery?!! Congrats! You'll love the P3!


Sent from my iPhone using Tapatalk
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
188,057
brand new batteries, 18650, IQ 83.

I'm done worrying about my IQ

I know I'm smarter than this thing anyway. Don't need no stinking numbers to tell me nuttin. :lol: :lol:

Seriously though, as long as it vapes, it's all good. This whole thing started because my battery didn't last as long as on the P2. Found out my batteries were aging. That's all I need to know.

New battery is in and hopefully I won't have to swap it out until tomorrow.

You're right...don't worry about the IQ. You're in the 80's. That's fine!
 

AstroTurf

Happy to be... Not Smoking!!!
ECF Veteran
Verified Member
Sep 27, 2014
11,385
48,544
Happy to be... Not Smoking!!!
Happy Thanksgiving to all who purchased a P3 or are getting a P3. Mine is headed to NC with a bunch of batteries, charger just in case, coils, tanks, and plenty of juice. Gosh no room for the darn turkey. Be safe everyone.

Edit: Almost forgot two 2.5's just in case of a breakdown.

Is a Ti in the mix?
 

NicoHolic

Ultra Member
ECF Veteran
Jul 13, 2013
2,034
4,435
USA
Happy Thanksgiving to all who purchased a P3 or are getting a P3. Mine is headed to NC with a bunch of batteries, charger just in case, coils, tanks, and plenty of juice. Gosh no room for the darn turkey. Be safe everyone.

Edit: Almost forgot two 2.5's just in case of a breakdown.

Have a fun and safe journey with your new P3 (and backups)!
 

hobbes4

Ultra Member
ECF Veteran
Verified Member
Jun 23, 2009
1,030
2,071
Nooooooooooooooooooooooooooooooooooooooooooooooo!

I haven't used it on the P3 or any mod for that matter, i was just curious about the stuff since i've read a little about it. Many people swore by Noalox for many years and now it seems No-Ox (which has been around just as long) is the preferred choice. Can someone tell me why the Deox-IT is no good?
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
188,057
I haven't used it on the P3 or any mod for that matter, i was just curious about the stuff since i've read a little about it. Many people swore by Noalox for many years and now it seems No-Ox (which has been around just as long) is the preferred choice. Can someone tell me why the Deox-IT is no good?

The preference for No Ox was explained in this thread within the last week by Vape360 if you care to search for it. More likely within the last 4 - 5 days.
 

AstroTurf

Happy to be... Not Smoking!!!
ECF Veteran
Verified Member
Sep 27, 2014
11,385
48,544
Happy to be... Not Smoking!!!
I haven't used it on the P3 or any mod for that matter, i was just curious about the stuff since i've read a little about it. Many people swore by Noalox for many years and now it seems No-Ox (which has been around just as long) is the preferred choice. Can someone tell me why the Deox-IT is no good?

Well thats easy...

Its not sold by ProVape!
 

rbrylawski

Sir Rod - MOL
ECF Veteran
Verified Member
Jul 11, 2014
8,211
34,162
Tampa, FL
I haven't used it on the P3 or any mod for that matter, i was just curious about the stuff since i've read a little about it. Many people swore by Noalox for many years and now it seems No-Ox (which has been around just as long) is the preferred choice. Can someone tell me why the Deox-IT is no good?

I wasn't saying noooooooo, as in don't use it. I was using a little (very little evidently) humor to say we've pretty much discussed No-Ox to death. I'm the one who started the thread on storing the blasted stuff to begin with.

I don't know diddly about lubricants. I just blindly buy whatever Provape tells me to buy. Because, well.....we just trust them! Yes we do!


Sent from my iPhone using Tapatalk
 

laurie9300

Super Member
ECF Veteran
Verified Member
Jan 10, 2014
737
4,135
Sydney Australia
Kayfun V4 with P3 connector from Navy Lifeguard..........
Optimized-S1640004.jpg
 

dhaiken

Ultra Member
ECF Veteran
Verified Member
I just got a pretty decent deal...

Ordered my P3 from a company called Hisvape in Germany (same place I bought my Provari 2) with free postage and a €5 discount code from Facebook the final cost was €189.75 or $236 -I've actually paid less than the US RRP!
:toast:

Luck O' the Irish!
 

hobbes4

Ultra Member
ECF Veteran
Verified Member
Jun 23, 2009
1,030
2,071
The preference for No Ox was explained in this thread within the last week by Vape360 if you care to search for it. More likely within the last 4 - 5 days.

Thanks, i appreciate the response and I understand why No-OX is preferred over Noalox...but i was asking about Deox-IT. This stuff is different, it completes drys so there is no residue left to attract dirt. It's used to clean battery contacts and other electronic contacts.

I wasn't saying noooooooo, as in don't use it. I was using a little (very little evidently) humor to say we've pretty much discussed No-Ox to death. I'm the one who started the thread on storing the blasted stuff to begin with.

I don't know diddly about lubricants. I just blindly buy whatever Provape tells me to buy. Because, well.....we just trust them! Yes we do!


Sent from my iPhone using Tapatalk

Okay, thanks for the clarification.
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
188,057
Thanks, i appreciate the response and I understand why No-OX is preferred over Noalox...but i was asking about Deox-IT. This stuff is different, it completes drys so there is no residue left to attract dirt. It's used to clean battery contacts and other electronic contacts.



Okay, thanks for the clarification.

And it's probably excellent stuff. Just don't know enough about it to know if it is compatible with the P3. Short of Vape360 getting back to you, I would go with the No Ox knowing it is ProVape-approved.
 

The Ocelot

Psychopomp
ECF Veteran
Verified Member
Aug 12, 2012
26,497
79,193
The Clock Barrens, Fillory
Happy Thanksgiving to all who purchased a P3 or are getting a P3. Mine is headed to NC with a bunch of batteries, charger just in case, coils, tanks, and plenty of juice. Gosh no room for the darn turkey. Be safe everyone.

Edit: Almost forgot two 2.5's just in case of a breakdown.

Ah, such devotion...

e7n.gif
 

Ca Ike

Ultra Member
ECF Veteran
Verified Member
Jan 20, 2014
1,121
4,217
Cali
Thanks, i appreciate the response and I understand why No-OX is preferred over Noalox...but i was asking about Deox-IT. This stuff is different, it completes drys so there is no residue left to attract dirt. It's used to clean battery contacts and other electronic contacts.



Okay, thanks for the clarification.

Deoxit is just a cleaner and nothing more. It works well and should be compatible with all metals so no problem cleaning the threads with it. You will need some no ox type lune though.

The only possible issue is how it will affect the finish but I use CRC electronics cleaner which is the same thing and I've had no problems with paints being affected.
 
Status
Not open for further replies.

Users who are viewing this thread