Official Squape R[eloaded] thread!
- Thread starter brickfollett
- Start date
- th_trl_thread_readers 0
- Status
Hahaha well don't get me wrong it's not cheap. £22 is exp added in with the rest. But then again I've never bought a belll top before so wouldn't know!
Sent from my Passport using Tapatalk
Here is my Squape R with a 28g kanthal with 10 wraps that get me 2.1Ωs and the ceramic readyXwick. I vape at 10.1w and it is great! I stuck a pin through one pic to show how to get it at the right level.
I love the Squape R! I built this in November and only had to torch it once! I use it almost every night with about 5ml of juice. Just fill it and go. I don't like to fiddle with perfection!
Last edited:
Junny, holy crap that looks amazing!!!
Super Seckzi Squape mode activated!!!
ps...I think the frosted look would go best anyways
Super Seckzi Squape mode activated!!!
ps...I think the frosted look would go best anyways
Last edited:
That's the best thing I've ever seen
Thank you thank you. Well i think it was deffo money well spent + it's not as tall! Which is awesome as the setup on the dna30 is proper stealth!
And yes i think I'll stick with the frosted
Sent from my Passport using Tapatalk
My only gripe is that it's not glass. It's poly so it prob crack with certain juices etc.
But I'm loving it, esp coz you can see the juices and all the internals etc.
Sent from my Passport using Tapatalk
But I'm loving it, esp coz you can see the juices and all the internals etc.
Sent from my Passport using Tapatalk
Last edited:
Yeah, definitely gonna want to be careful about what juices you run in that bad boy. Of course, the seckzi hotness is totally worth not being able to run tank crackers
Haha yep exactly. But you never know what may crack it. Could be anything. Just have to be careful
Sent from my Passport using Tapatalk
Well I've had my Squape R for a few weeks now and I'm still impressed. Great flavor and just super easy to build, and it's been exclusively nickel builds. I just ordered the black nano tank from VapeRev yesterday and should have it early next week.
If you don't mind me asking, how do you do your nickel builds? I can't get mine to work on my ehpro zquape.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I don't mind you asking at all. I'm convinced I'm having repeated success with all my nickel builds because of the Tempered nickel I'm now using exclusively. I have a bunch of annealed nickel that will probably go to waste now but I don't care because the Tempered has worked so well for me. For me it has been night and day. I even tried twisted annealed nickel that still gave me fits. This stuff is repeatable every time.
I actually changed my Squape build last night after 2 weeks and it's rock steady. I don't do anything fancy. I do 30ga 7 spaced wraps on a 3mm rod, making sure it's wrapped tight. Then push it together until it's evenly spaced. Place the rod in the W deck and wrap the nickel around the posts and tighten down. Before I remove the rod, I make sure the coil is not touching any part of the deck, if it does it messes with resistance, and make sure the coil is evenly spaced. Then I remove the rod and wick the coil. It's easy to wick because the tempered nickel doesn't squish together or move like the annealed did on me. I can even rewick it after a week and have it hold its shape. I don't dry burn it at all, even when rewicking. If it looks gross, I just change it out because this tempered stuff is so easy to use.
It may be just me....but I swear by it now, I won't use anything else. I don't dread building nickel any more. It's stable and repeatable.
I should add, it's .15 at 450deg hitting at 20 watts and I never hit TP. It's a great vape for me.
Last edited:
Thanks for that! Needed something like that for when i get my dna30conversion done.
However need some help. Don't know if this is ok or not, but using the bell vape cap i can see the whole unit inside.
I'm always getting a trapped air bubble in one of the slits (channels on each side at the bottom). I move it out but it always gets trapped again. It does affect my vape.
Any solutions or know why this is happening?
Sent from my Passport using Tapatalk
However need some help. Don't know if this is ok or not, but using the bell vape cap i can see the whole unit inside.
I'm always getting a trapped air bubble in one of the slits (channels on each side at the bottom). I move it out but it always gets trapped again. It does affect my vape.
Any solutions or know why this is happening?
Sent from my Passport using Tapatalk
My black nano tank should arrive today, or it's supposed to any way. That bell vape cap tank you have looks awesome. Now I wanna get me one of those too. It's interesting you can see what's happening inside the tank. Since I can't see inside my tank, I don't know if the bubbles you're seeing are normal. But if your not getting a satisfying vape, I would say the bubbles probably shouldn't be there. But when mine is wicking good, I see lots of bubbles, so maybe they should be there.
That wasn't much help, sorry. We need to have someone with the bell cap to chime in and let you know if they have bubbles or not.
I was going to get the nano black version. But the lack of window is annoying. Then this bell cap came along and is so cool and I'm very very happy with it. You can't be disappointed with this bad boy esp on my lpg!! Mini stealth!
Lol thanks for the info, bubble are good. Unsure if they are trapped in the side slit tho.
Oh well time for a rebuild anyway haha
Sent from my Passport using Tapatalk
Twmpered nickel. That's what I have to look for asap.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Stealth Vape is the only place I know of to currently get it in cake sized quantities (noncommercial/industrial lol)
- Status
