- Status
Sorry guys...rough week here. My mother-in-law passed away the day I returned from Chicago, so the shop has been on cruise control with me out of town again this week. Orders are going out as usual, but naturally this slowed everything down this week. Apologies for that.
But its time for us to get back up to full speed and do what we do best.
Sent from my Samsung Galaxy Note II using Tapatalk.
But its time for us to get back up to full speed and do what we do best.
Sent from my Samsung Galaxy Note II using Tapatalk.
Sorry to read about your mother-in-law. Condolences to you and your family.
On another note . . . Thank you! I received my pro v2, today. You folks make some really fantastic looking tanks.
- Andy
On another note . . . Thank you! I received my pro v2, today. You folks make some really fantastic looking tanks.
- Andy
Wow so happy to find this thread had so much questions about your product but went thru all 67 pages and found answers to most of them 
I just got a black provari mini v2.5 to go with my killer 705 and was hoping to get ur pro-v2 to finish the look
One question any news/eta on the Top fill holes for the v2?
I just got a black provari mini v2.5 to go with my killer 705 and was hoping to get ur pro-v2 to finish the look
One question any news/eta on the Top fill holes for the v2?
Thanks for all your condolences, greatly appreciated!
With the shop guys on their own while I was gone, I am afraid that a mistake might have occurred on some recently shipped Pro-V2's. I had a small box of 25 bottom skirt caps that had a different teardrop pattern than the Pro-V2 production version that were not for sale. The teardrops on these caps alternate up and down vs all pointing in one direction. The cap itself is otherwise completely the same. I think there are about 15 of these out in the wild.
So anyone that gets a Pro-V2 with this cap can contact me and I'll exchange the bottom cap if you wish. Or you may keep it. It is rare after all!
Sent from my Samsung Galaxy Note II using Tapatalk.
With the shop guys on their own while I was gone, I am afraid that a mistake might have occurred on some recently shipped Pro-V2's. I had a small box of 25 bottom skirt caps that had a different teardrop pattern than the Pro-V2 production version that were not for sale. The teardrops on these caps alternate up and down vs all pointing in one direction. The cap itself is otherwise completely the same. I think there are about 15 of these out in the wild.
So anyone that gets a Pro-V2 with this cap can contact me and I'll exchange the bottom cap if you wish. Or you may keep it. It is rare after all!
Sent from my Samsung Galaxy Note II using Tapatalk.
Hi sorry didn't see the previous post wast replying after having read back to page one my condolences to you and your family sir
On a different note if you get any of the alternating teardrops botoms back I would like to get those would you be able to re finish them in black? I think a black alternating teardrops botom would would match the alternating teardrop on the mini n look really hot on a black mini with the top cap n botom battery cover In silver
On a different note if you get any of the alternating teardrops botoms back I would like to get those would you be able to re finish them in black? I think a black alternating teardrops botom would would match the alternating teardrop on the mini n look really hot on a black mini with the top cap n botom battery cover In silver
We have toyed with the idea of powdercoating the outside of Stainless caps but its still being decided if it is worthwhile. As far as the alternating teardrop caps. There are about 10 new ones left of the original 25, so I guess I could offer those if people want them on their Pro-V2 or as a spare bottom cap. There won't be anymore
Here is the production cap next to the alternating teardrop version.
Sent from my Samsung Galaxy Note II using Tapatalk.
Last edited:
We have toyed with the idea of powdercoating the outside of Stainless caps but its still being decided if it is worthwhile. As far as the alternating teardrop caps. There are about 10 new ones left of the original 25, so I guess I could offer those if people want them on their Pro-V2 or as a spare bottom cap. There won't be anymore
Sent from my Samsung Galaxy Note II using Tapatalk.
Mine is supposed to arrive on Monday. I am curious if mine is one of the alternating ones.
Heads up, folks . . . Through no fault of Vaperfexion, I managed to crack the PETG tube on my new xl Pro V2, which I had received, yesterday afternoon. Like my cartotanks with a Pyrex tube, I lubed the tube's inside edge with juice, prior to inserting it. Uh, I used a lemonade flavor juice. Yeah, yeah, I know.
Well, late this afternoon, I noticed that the tube had developed quite a few vertical cracks. Arrrg, I was going to take this tank back to Vegas with me.
In any event, be mindful of what you put into your tanks. Here is a pic of when it was in perfect condition. Gotta say, it's a great looking piece of work.
- Andy . . . Challenge the day.
Well, late this afternoon, I noticed that the tube had developed quite a few vertical cracks. Arrrg, I was going to take this tank back to Vegas with me.
In any event, be mindful of what you put into your tanks. Here is a pic of when it was in perfect condition. Gotta say, it's a great looking piece of work.
- Andy . . . Challenge the day.
Not sure what you mean by "locking"?
Sent from my Samsung Galaxy Note II using Tapatalk.
Heads up, folks . . . Through no fault of Vaperfexion, I managed to crack the PETG tube on my new xl Pro V2, which I had received, yesterday afternoon. Like my cartotanks with a Pyrex tube, I lubed the tube's inside edge with juice, prior to inserting it. Uh, I used a lemonade flavor juice. Yeah, yeah, I know.
Well, late this afternoon, I noticed that the tube had developed quite a few vertical cracks. Arrrg, I was going to take this tank back to Vegas with me.
In any event, be mindful of what you put into your tanks. Here is a pic of when it was in perfect condition. Gotta say, it's a great looking piece of work.
- Andy . . . Challenge the day.
That is a first! Do I congratulate you? In any case, I'll replace your tube. PM me with your order #.
Sent from my Samsung Galaxy Note II using Tapatalk.
Last edited:
I think the carto locking is in reference to the UDCT Tanks China has been rolling out. Those aren't my cup of tea due them blocking air flow, but maybe a setting screw or something in the bottom of the tanks that can be tightened from the side, might be a good idea, possibly under the o-ring for the base of the carto. Just an idea though, but the o-rings on my Vaperfexion Tank is the tightest I've ever had, there's been no need for locking on mine.
Sorry to hear about the Mother-In-Law Cuse, that's always rough. My condolences to you and yours.
Andy, I managed to haze the inside of my original PETG Tube last month, but I literally have one of the most corrosive juices ever, using Red Hots Concentrate at 15% in DIY, it will crack polycarb in less than 10 seconds. It didn't do the same thing to my second one, but you, sir, deserve a congratulations cause the PETG stood up to mine better than lemonade
Sorry to hear about the Mother-In-Law Cuse, that's always rough. My condolences to you and yours.
Andy, I managed to haze the inside of my original PETG Tube last month, but I literally have one of the most corrosive juices ever, using Red Hots Concentrate at 15% in DIY, it will crack polycarb in less than 10 seconds. It didn't do the same thing to my second one, but you, sir, deserve a congratulations cause the PETG stood up to mine better than lemonade
LMAO . . . No, I'm more embarrassed than anything else. Simply reminding others to be careful. Wanted the quartz tube initially, but per our previous chat, they are not yet available. I simply couldn't wait to get one of these great looking tanks..
Thank you, I really appreciate your kind gesture, but no worries, I ordered another 2 PETG tubes, yesterday.
Lol . . . Just get those quartz tubes available.
- Andy . . . Challenge the day.
Andy, I managed to haze the inside of my original PETG Tube last month, but I literally have one of the most corrosive juices ever, using Red Hots Concentrate at 15% in DIY, it will crack polycarb in less than 10 seconds. It didn't do the same thing to my second one, but you, sir, deserve a congratulations cause the PETG stood up to mine better than lemonade
MVB listed their Lemonade as one of the juices, which could cause damage. As Phil (pbusardo) would say, "Okay, I get it, now!"
On a serious note, it was all my own doing. We live and learn through trial and error.
My only one true issue with Vaperfexion is that, they make damn good sexy looking tanks, which is going to cost me.
- Andy . . . Challenge the day.
I think the carto locking is in reference to the UDCT Tanks China has been rolling out. Those aren't my cup of tea due them blocking air flow, but maybe a setting screw or something in the bottom of the tanks that can be tightened from the side, might be a good idea, possibly under the o-ring for the base of the carto. Just an idea though, but the o-rings on my Vaperfexion Tank is the tightest I've ever had, there's been no need for locking on mine.
Sorry to hear about the Mother-In-Law Cuse, that's always rough. My condolences to you and yours.
Andy, I managed to haze the inside of my original PETG Tube last month, but I literally have one of the most corrosive juices ever, using Red Hots Concentrate at 15% in DIY, it will crack polycarb in less than 10 seconds. It didn't do the same thing to my second one, but you, sir, deserve a congratulations cause the PETG stood up to mine better than lemonade
Thanks for the condolences and also clarifying the "locking" mechanism L7! I usually follow developments like that, but I am a little behind at the moment.
Not sure a locking mechanism is really that worthwhile right now. We have our r&d resources tied up in a pair of new mods (one rba, one 510) that we will introduce this year as well as improvements and upgrades to our carto tanks. So we have a pretty full plate ahead.
The thing with PETG. It looks EXACTLY like clear Poly. We are pretty tight on our inventory controls, but the remote possibility exists that a poly tube could somehow jump into the PETG bins! Thats why I like to see if it is truly a PETG failure or just a rogue poly tube!
- Status
Similar threads
- Locked