On stockpiling after FDA deeming regulations
- Thread starter dcdozer
- Start date
- th_trl_thread_readers 0
- Status
I already have those thoughts haha.My budget is really tight,so i'm grabbing everything i can,luckily i was hearing about the possibility of this happening back when i first started vaping in 2014,so i went into stock up mode back then on the essential and more expensive stuff like nic base,etc.,not to mention the shinyitus,that sort of helped me stock up on gear the last few years haha.Even though i have enough stuff to keep me going for most likely the rest of my life,i will still continue to get more until i either just can't get anything anymore or it becomes too expensive,either of those situations will be when i am finished.I definitely won't need to buy anything at that point haha.In a year from now we may be looking back and thinking "Why didn't I more. The price for vape stuff was so cheap back then!"
Congrats! Those went fast lol.Hammer tone
On the Way
I hate the FDA - Costing me a Ton of Money this year
Wow did they ever. I finished payment on my PayPal Master card. Checked my Email for verification
popped back to the page and 
nothing
Just got my latest order from Fast Tech! For the Kayfun lovers here nothing beats these Bell Cap kits and these bases...the only thing though if you use 28 guage that you will need to replace the post screws but thats no big deal. Even picked up one of the Kuro coil makers for fun and they are working very good. Now they discontinued the base that I usually get and this one only has one airflow hole where the others had 2 but so far working good enough for me.
$3.79 Kayfun Bell Cap Kit w/ 510 Drip Tip - acrylic + stainless steel / ohm logo at FastTech - Worldwide Free Shipping
$4.64 Replacement Base for Kayfun Lite Five Pawns - stainless steel at FastTech - Worldwide Free Shipping
$5.32 Kuro Koiler Wire Coiling Tool (3-Piece Set) - CW-20 + CW-25 + CW-30 at FastTech - Worldwide Free Shipping
$3.79 Kayfun Bell Cap Kit w/ 510 Drip Tip - acrylic + stainless steel / ohm logo at FastTech - Worldwide Free Shipping
$4.64 Replacement Base for Kayfun Lite Five Pawns - stainless steel at FastTech - Worldwide Free Shipping
$5.32 Kuro Koiler Wire Coiling Tool (3-Piece Set) - CW-20 + CW-25 + CW-30 at FastTech - Worldwide Free Shipping
Never got into all the Kayfun air hole hype. The hollow pin dictates maximum air flow anyway. No complaints with any of my Kayfun/KFLP Tanks
I'm old, but have several smoker family members. I'm careless about leaving my rigs lying around (except when there might be young folk in the house), and my family members can be grabsy. So...
I was also looking for a Kayfun base with dual airflow but nothing when i looked.
That Kayfun clone base is very nice ... a true clone with no Svoemesto markings.
Just a bit tighter draw compared to authentic, however, very good juice channels.
I bought a bunch of them and bellcaps for my extra ProVaris.
Sent via iPhone
Re: Utah HB 0415. Here's a quote from Bill Godshall.
"Details for "mail order sales" (which is what Internet sales are) cited on line 300 of the bill (and at the link below)
Utah State Legislature
specify that licensed retailers in Utah cannot sell via "mail order" to anyone other than another licensee.
Although Utah could prosecute violators who are located in Utah (although I think successful lawsuits can be filed challenging this provision in federal court), Utah law enforcement and prosecutors are unlikely to try enforcing this law against or prosecuting out-of-state Internet vendors (who sell to Utah consumers)."
I plan on doing business as usual online. Hope this settles it.
"Details for "mail order sales" (which is what Internet sales are) cited on line 300 of the bill (and at the link below)
Utah State Legislature
specify that licensed retailers in Utah cannot sell via "mail order" to anyone other than another licensee.
Although Utah could prosecute violators who are located in Utah (although I think successful lawsuits can be filed challenging this provision in federal court), Utah law enforcement and prosecutors are unlikely to try enforcing this law against or prosecuting out-of-state Internet vendors (who sell to Utah consumers)."
I plan on doing business as usual online. Hope this settles it.
I'm an old geezer with myopia. I can see threads on a screw but can't see the calendar across the room well enough to see the date.
OK. So I'm the one who forgot those were on sale tonight until I saw your post.Hammer tone
On the Way
I hate the FDA - Costing me a Ton of Money this year
That's a nice looking rig!
Then again, some of us might be saying, "See I told you to buy more while it was still available and dirt cheap!"In a year from now we may be looking back and thinking "Why didn't I more. The price for vape stuff was so cheap back then!"
OK. So I'm the one who forgot those were on sale tonight until I saw your post.
That's a nice looking rig!
Had a family emergency. Nice Family Van decided to lose the Transmission leaving 6 stranded at a Lake 1.5hrs. away. Just got back from retrieving everyone.
Also just realized this is the Most I have spent on any Mod(Reo P67) including my SX Mini M Class
I usually average $38-$60
Thinking Seriously about Time Capsuling this one for 2050 opening. Should be worth a Fortune as a Historical relic
I have the Nic to go the Distance but not so sure about the body.
97yrs
Had a family emergency. Nice Family Van decided to lose the Transmission leaving 6 stranded at a Lake 1.5hrs. away. Just got back from retrieving everyone.
Also just realized this is the Most I have spent on any Mod(Reo P67) including my SX Mini M Class
I usually average $38-$60
Thinking Seriously about Time Capsuling this one for 2050 opening. Should be worth a Fortune as a Historical relic
I have the Nic to go the Distance but not so sure about the body.
Well I can't like this post because car breakdowns and repairs totally stink.
I say enjoy the living heck out of that P67 every day for the rest of your life
it is build like a tank and should last forever!
Well I can't like this post because car breakdowns and repairs totally stink.
I say enjoy the living heck out of that P67 every day for the rest of your life
Wiff da Spar parts I'ma hoping to do jest that.<<<<<<<, That's hillbilly for FDA Bite Me!
Y'know, I kinda like the look of those bell caps, but they are too short to utilize the ring on the Kato Square mod I prefer.
Also, I just realized that the Health Cabin ehPRO $5 KFL'S don't qualify for free shipping. But shipping would only take them to <$10. I think....lol
Also, I just realized that the Health Cabin ehPRO $5 KFL'S don't qualify for free shipping. But shipping would only take them to <$10. I think....lol
w00t! w00t! Love vape mail. Sounds like you're stocking up the right way. I'm all over the place. Hey, +chanelvaps , I'd like to have a few Kayfuns around. I heard the new v5 was good but Busardo needed more air restriction and they made him 3 different airflow adjustments to try. It's a recent video ....maybe 2 days ago? With all of the hell going on, I'd like to revert back to some MTL tanks. Any advice? I'm looking at mech mods too. AND, we'd better be looking at the old ecig (newer technology of course) for when we're out and about. Check out the review Ruby Roo did on the Juul. Lots of nic to keep us from chain vaping. Quite interesting.
Putting used batteries back into storage:
I bought a handful of DNA40 mods and am running them for several days each before putting them into the stash.
I didn't want to take the VTC4 and 5 out of my daily-drivers, so I'm using one of the 25Rs already in the stash. I'd put them in without charging, having read that the partial charge state they ship in is the best for long-term storage.
When I get ready to put this battery back into storage, after verifying these new mods, what charge level do I want to bring it down to before putting it away?
I'm not terribly worried about battery availability, but don't want to waste it, either, considering it may be a year or two before I come back to it.
I bought a handful of DNA40 mods and am running them for several days each before putting them into the stash.
I didn't want to take the VTC4 and 5 out of my daily-drivers, so I'm using one of the 25Rs already in the stash. I'd put them in without charging, having read that the partial charge state they ship in is the best for long-term storage.
When I get ready to put this battery back into storage, after verifying these new mods, what charge level do I want to bring it down to before putting it away?
I'm not terribly worried about battery availability, but don't want to waste it, either, considering it may be a year or two before I come back to it.
- Status
Similar threads
- Locked
