Origen Genesis v2 Clone

[Limbeckx]

Anyone know where I can get the tobecco clone?

Healthcabin sells them but they are have been out of stock for at least the last week: Tobeco Origen V2 Genesis Stainless Steel Rebuildable Atomizer (Clone)

Focalecig just in a new version btw....

I ordered one from Gearbest.com btw. I will report how it is, once I receive it

 

[TrollDragon]

My Origenny has arrived from Gearbest. Lots of sharp edges and a cut o-ring but nothing that a little emery paper won't take care of and they give you lots of spare parts.
The 510 threads are aluminum so you have be very careful with them when.

It performs great but doesn't have the flavor of the Origen V2 dripper. Since I am still playing with builds on it, that could very easily change.
Pictured drip tip is this one here which fits well with a minimal wobble.

 

[TrollDragon]

Well I snapped the center post screw... Need to find a replacement or make something instead.

Any idea of the thread size on that post?

 

[TrollDragon]

I did a repair on the Origenny and a mesh build the other night. Excellent flavor, just gotta remember to tilt it now.

 

[TrollDragon]

I'm loving mine.Super easy build

Nice... But isn't that a Kennedy rda?
Which is nothing at all like a Origen Genesis...

 

[Retro138]

Nice... But isn't that a Kennedy RDA?
Which is nothing at all like a Origen Genesis...

T,
Damn you're right. I bought both today and setup the Kennedy. I should delete that build and pic. Also have to edit my setup pic.

 

[TrollDragon]

T,
Damn you're right. I bought both today and setup the Kennedy. I should delete that build and pic. Also have to edit my setup pic.

It's all good, I like the looks of the Kennedy, hows the flavor on it?

 

[Retro138]

It's all good, I like the looks of the Kennedy, hows the flavor on it?

Flavor and clouds. 3 drops on each corner and I get 6-7 great pulls using buckshot XXX. Kind of all around good.

 

[DJD]

is there a decent Origen V2 clone worth spending your money on?

 

[Vaslovik]

Then you're doing it wrong....

I beg to differ, you can do it right on the AGA-T2 and it's still an obnoxious, clumsy, and cantankerous device to use, with those tiny little thumbscrews that you have to use two pairs of hemostats to tighten, and then they come loose under heat. I started with one so I know. I gave it away. I'm perfectly content with my RSST's for the last couple years. A far better gennie in my experience.

 

[Vaslovik]

Dont be ridiculous the aga t-2 is a piece of crap.....in it's day it was a decent cheap gennys for beginners but even then it's appeal was that it was cheap, although it was a far better vape than it's chief rival the RSST which trully is a piece of crap.....

While I will readily agree with you regarding the AGA-T2 I must strenuously disagree with you regarding the RSST. It's served me very well for the last couple years and I'm very happy with it. Many others will disagree with you as well. The RSST has given me far better vaping than that AGA-T2 ever did, far better flavor and it's far more reliable as well as far easier to build.

May I ask what you use?

 

[Equality 7-2521]

If you can learn how to build on a difficult genny all others are a cake walk.....ease of building is no reason to buy a genny...if you want easy go get a dripper or a sub ohm tank.

 

[Equality 7-2521]

While I will readily agree with you regarding the AGA-T2 I must strenuously disagree with you regarding the RSST. It's served me very well for the last couple years and I'm very happy with it. Many others will disagree with you as well. The RSST has given me far better vaping than that AGA-T2 ever did, far better flavor and it's far more reliable as well as far easier to build.

May I ask what you use?

stormrider V2, Pulse G, Satburn 22,IN'AX, Nextgen,....and a few others....Oh I'm well aware of the RSST fanboys.... that proves nothing...The AC-9 the atty the rsst was cloned from wasn't even designed to deliver good flavor it was desgined to be easy to build for genny noobs.and it does what it is designed for,and that's about all it does. In fact it was such a lousy flavor atty that there were 2 companies that I know of that actually went to the extremes of building chamber reducer inserts for the rsst to try and improve it's flavor by cutting down the massive volume of the top cap.

 

[Equality 7-2521]

is there a decent Origen V2 clone worth spending your money on?

Haven't heard of one..not to many people have cloned it and those that have all did a bad job....

 

[sampleit]

Well I have a genuine mk2 which has fluctuating ohms also getting check atty if I screw down only just tight on my sx mini so hmm bad clones?
Ps iv done several build cotton mesh diff size wire etc all with same results

Haven't heard of one..not to many people have cloned it and those that have all did a bad job....

 

[ccwaters]

I have 3 different clones, and an Authentic which I recently purchased, Both Yeahsmo, and Tobeco make decent clones of it, Tobeco being the best of the three. Even the $9.00 Fasttech clone is functionally identical to the OG. I would suggest buying an authentic used as I did, some real bargains can be found since most everyone wants the newest version.

If you are unable to get the authentic the above mentioned clones are pretty decent.

I've had no issues with any of the clones, or the authentic. I will also add all of them vape exactly the same. I do know that many had issues with the one FT sells, mine had none of those issues. Kanvape as of this post does have some Tobecos in stock, unfortunately the sale they were running just ended, it was 30% off of the current price which is $17.95

 

[ccwaters]

If your still looking for one of these, look no further then the Tobeco MRK II clone, absolutely fantastic. Purchased mine from Kanvape, in stock, shipped free, $26.95 and had a 20% off code to boot. Ordered, June 30th, shipped same day, arrived July 2.

Sorry about the poorly done video, must work on that a bit.

 

[TrollDragon]

Looks great!
Is the base and 510 threads stainless now as my Origenny's aluminum threads are starting to wear down.

I put one of these on it to save the threads, work great and doesn't look to bad.
$3.90 510 Heat Dissipation Heat Sink for Atomizers (2-Pack) - stainless steel / 22mm diameter at FastTech - Worldwide Free Shipping

 

[ccwaters]

I'm not 100% certain, but it looks/feels like the base/510 is stainless, either way it appears to me it is a big improvement over the previous one

 

[TrollDragon]

Thanks!