I think you might be right. The deck doesn't even look like it's made of SS. I contacted FC about this and will be returning it. I guess that's what we get for buying crappy clones.
Origen Genesis v2 Clone
- Thread starter crazelee
- Start date
- th_trl_thread_readers 0
- Status
I think you might be right. The deck doesn't even look like it's made of SS. I contacted FC about this and will be returning it. I guess that's what we get for buying crappy clones.
Hello,
I contacted FC.too but they don't seems receptive… they want me to send them a video ^^
I contacted FC.too but they don't seems receptive… they want me to send them a video ^^
Bonjour didooz,
Yes, I have an ohm meter and this is how I realise why it doesnt work.
And I made a few tests tonight.
And, finaly, this is not what I.though.
The deck is not made of plastic but aluminium I guess, but it is painted and this is the paint which is blocking powerflow.
When I.test the bottom, where it is engrave "Origen etc", the power flow pass along.
But, in this state, power flow can reach atomiser's burn chamber.
I must scratch the paint, I will do some tests.
Yes, I have an ohm meter and this is how I realise why it doesnt work.
And I made a few tests tonight.
And, finaly, this is not what I.though.
The deck is not made of plastic but aluminium I guess, but it is painted and this is the paint which is blocking powerflow.
When I.test the bottom, where it is engrave "Origen etc", the power flow pass along.
But, in this state, power flow can reach atomiser's burn chamber.
I must scratch the paint, I will do some tests.
This is exactly what I thougt.
you can use cap code and a little time to take the paint out of the 510 connector without cratching it.
I ment "Cape cod". It's a kind of lightly abrasive tissue impragnated with polish, very efficient.
You can get some here (in france):
Polish Cape Cod
Ok thanks
Matew any luck with getting the Origen going? FC said they are contacting the supplier to figure out what the issue is. That will end up taking forever I'm guessing.
My AGA T2 is still one of the best vapes there is. Mesh and 26 gauge kanthal.
Never any leaking issues or wicking issues. Just got away from tube mods. REO far more travel friendly and vapes almost as good. Splitting hairs with the nod towards the AGA T.
Never any leaking issues or wicking issues. Just got away from tube mods. REO far more travel friendly and vapes almost as good. Splitting hairs with the nod towards the AGA T.
Hey,
FC said same to me.
We will see but I'm not going to let it go
I'm still testing some moves to make it work.
I'm trying to remove the paint with acetone, I let it step, I'm not so confident but still hope.
I will be back here to say if it was a success
FC said same to me.
We will see but I'm not going to let it go
I'm still testing some moves to make it work.
I'm trying to remove the paint with acetone, I let it step, I'm not so confident but still hope.
I will be back here to say if it was a success
You have to use a dremel or so to remove the paint on the 510 connector and inside the tank, where the desk bloc is making contact (around the positive connector).
Use a brass brush for the 510 connector and a sanding stone for the tank.
You must also make shure that the desk is very tight on the tank, for good contact: use pliers to tighten the screw.
I've done all this, and mine works great.
Use a brass brush for the 510 connector and a sanding stone for the tank.
You must also make shure that the desk is very tight on the tank, for good contact: use pliers to tighten the screw.
I've done all this, and mine works great.
I also got the one from FC and I just sanded off the paint from the 510, took about 3 minutes and now it works flawlessly. The taste is on par with the Sat22 and the vapor production trumps the Kraken. I couldn't recommend this atty enough.
I just got mine also and I am having the same problem.
What is the "desk block" your talking about sanding?
this thing sounds like a piece of crap..hopefully someone like ehpro will make a decent clone.is this the only clone of the origen genny or are there others.
Last edited:
I cut my teeth on the aga t-2....a big roomy atty to learn on, but not what I'd call a great or even good genny. I'm glad it was around back then I owned a couple and modded them,but if I was going to recommend a starter genny it wouldn't be the aga-t2
Dont be ridiculous the aga t-2 is a piece of crap.....in it's day it was a decent cheap gennys for beginners but even then it's appeal was that it was cheap, although it was a far better vape than it's chief rival the RSST which trully is a piece of crap.....genny desgin has come a long long way the agat-2 is garbage put up against the high end gennys even the mid range gennys of today..even a mid range genny like the storm rider blows it out of the water, not to mention the duddenberg ......but alongside things like the rsm rocket,the in'ax.the pegasus 22 the origen genisis v2, the pulse G.the Lon the Sat 22, and a dozen others the aga-t2 is crap.....even a novice genny builder I'd recommend the stormrider ,the agat-2 won't deliver as good a flavor and I vaped the agat-2 with mesh and ceramic wicks,and .there is no better wick for flavor than porous ceramic wicks...by the way how many diffrent gennys have you actually owned.........and seriously if you haven't found a better genny than the aga-t2 you are doing alot wrong......because I've been vaping gennys for 3 years and there is not a single experinced genny owner I know that has not thrown his aga t-2 in the garbage a long time ago... hell the aga-t3 was a much better atty.
Last edited:
El oh el oh el
Cmon we're discussing ecigs. I explained what I liked. You in turn told me that what I liked sux. Then wrote a book on why what I liked sux.
It's a wick hole and a chamber. The wick hole on the aga t2 ideal diameter imho. Mine vapes wonderfully. I could show you how to set one up since you've clearly had such a bad experience.
Not that I would question your vast knowledge or imply that you don't know everything genny and your"say"is final even though we're discussion opinions....
Cmon we're discussing ecigs. I explained what I liked. You in turn told me that what I liked sux. Then wrote a book on why what I liked sux.
It's a wick hole and a chamber. The wick hole on the aga t2 ideal diameter imho. Mine vapes wonderfully. I could show you how to set one up since you've clearly had such a bad experience.
Not that I would question your vast knowledge or imply that you don't know everything genny and your"say"is final even though we're discussion opinions....
Last edited:
- Status
Similar threads
- Locked
