RDA Origen Little 16mm Clone

[oplholik]

I have different sets of hex drivers + another set coming, but nothing that will fit these. I should have gotten a hex key with it, but can't find anything that would have come with it. It could be just misplaced somewhere, But anyway, a couple more of these are coming, so should end up with a hex key or two of whatever size they are.

 

[muzichead]

I have different sets of hex drivers + another set coming, but nothing that will fit these. I should have gotten a hex key with it, but can't find anything that would have come with it. It could be just misplaced somewhere, But anyway, a couple more of these are coming, so should end up with a hex key or two of whatever size they are.

Thats too bad... I know the authentic is 1.5mm which is the same as the screws in the Nuppin' also. You might just be out of luck getting the pin out at all, but then what do you expect for a chinese throwaway?

 

[herb]

Just be advised though,they are really getting slow,i placed my order for the beauty ring,and a couple Griffin bases on 11/10,here it is 11/25 and they still haven't even shipped my order yet.Everything said said ships in 3-7 days,but it's been a lot longer than that,i am not happy with them at all right now.

OMG, if i found out it didn't ship yet i would eventually be tossed in a Chinese prison for hopping on a plane and getting the person responsible for holding up my order in a head lock until he agreed to hand it over .

I paid for it , it's mine dammit , when it says ships in 3-7 days it better ship in 3-7 days or things are not going to end well lol.

 

[b.m.]

OMG, if i found out it didn't ship yet i would eventually be tossed in a Chinese prison for hopping on a plane and getting the person responsible for holding up my order in a head lock until he agreed to hand it over .

I paid for it , it's mine dammit , when it says ships in 3-7 days it better ship in 3-7 days or things are not going to end well lol.

Haha,that's pretty much how i feel right now.I went through this with them 1 time about a year ago too.I had ordered a mod that said the same 3-7 days.After a month,it still had not shipped,but i didn't want to cancel because they were the only place that had that mod,so i kept waiting,then Chinese new year hit and slowed it down more.It finally shipped 2 1/2 months after i ordered it,and i swore i would never deal with them again,but eventually started doing small orders and was getting them fairly quick.Now,i see they are right back to the same thing,so i am definitely done after this one.Their cs sucks too,i sent an email asking why it is taking so long,and the only response i got was a link to my order progress,or lack of progress i should say,so yeah that was a big help sending me a link to information i was already looking at haha.

 

[herb]

Haha,that's pretty much how i feel right now.I went through this with them 1 time about a year ago too.I had ordered a mod that said the same 3-7 days.After a month,it still had not shipped,but i didn't want to cancel because they were the only place that had that mod,so i kept waiting,then Chinese new year hit and slowed it down more.It finally shipped 2 1/2 months after i ordered it,and i swore i would never deal with them again,but eventually started doing small orders and was getting them fairly quick.Now,i see they are right back to the same thing,so i am definitely done after this one.Their cs sucks too,i sent an email asking why it is taking so long,and the only response i got was a link to my order progress,or lack of progress i should say,so yeah that was a big help sending me a link to information i was already looking at haha.

HOLY SH_ _ !!!, i would go ballistic , it's not like it will be at your door in 2 1/2 months it's just starting the shipping process 2 1/2 months after you ordered it, CS needs improvement , 3 -7 days my a_ _ .

I am not even the one who had to go through that & i got beads of sweat pouring off my forehead & i'm on the verge of blowing a gasket just thinking about it.

Need to go lay down now

 

[TheWestPole]

I took the finish of my grey Pico Squeeze down to bare aluminuim last night. Softened the edges around the squonk window while I was at it. Like the look better with Origen Little now. Pairing the two makes for the smallest squonker I've ever held in my hand.

 

[zoiDman]

I took the finish of my grey Pico Squeeze down to bare aluminuim last night. Like the look better with Origen Little now. Pairing the two has made for the smallest 18650 squonker I've ever held in my hand.

View attachment 617171

That Looks Sweet!

 

[TheWestPole]

That Looks Sweet!

And it's cheap, cheap, cheap...

 

[Danrogers]

Just ordered my O-16 from Hotecig and it came with a beauty ring for the same price as the the O-16 without one.
Now the waiting begins!

Been using my original for 6 months and love it, but now my wife wants one...

 

[Rathamar]

Anyone here know how you are supposed to change the center pin in these? I see no screw driver slots, or any way to use a hex wrench to screw it out, and screw another in.

Hey oplholik - which pin came installed from Fasttech? I have this item arriving today and am just curious if I am going to have a project at home tonight before I can use it on my Wraith.

 

[oplholik]

Mine came with the BF pin installed. I did find the allen key that came with it, and it seems like it will work, although I haven't tried to change the pin. But I swear, that even with magnification, I cannot tell there is a hex in the pin.

 

[Rathamar]

Mine came with the BF pin installed. I did find the allen key that came with it, and it seems like it will work, although I haven't tried to change the pin. But I swear, that even with magnification, I cannot tell there is a hex in the pin.

Thanks. Good to hear the BF pin is in there (hoping mine is the same way).

 

[Burnie]

Well decided to get another Origen Little and an Origen Little Tank from FT since they had the 10% off. Got both and a pack of iCare coils for just over $20. Went with the regular free shipping just to see how long it is taking.

 

[Rathamar]

So my Origen Little 16mm Clone & Beauty Ring arrived yesterday. I know others have stated it, but wow is this RDA small, though with the beauty ring, it looks great on my COV Wraith.

After I found a build that I like on this, the flavor is amazing! I am going to use this as the daily driver for a week or so to see if I still like it after that time.

Some things I learned last night -

1. Building on this is not easy (at least the 3 builds I did last night), but I finally found one that I like on it.
2. It is super easy to over squonk on this. Press a little too hard and there is juice everywhere. I think I have it down now.
3. Unrelated to the Origen, but the CopperVape Bottles do not work in the COV Wraith. They are very similar, but there is just enough difference where the juice will leak down the bottle instead of up the squonk hole.

I put a pic of my build below. It was not very easy to set it up this way, so if any of you that have more experience with this RDA have suggestions, I welcome them.

 

[oplholik]

What are the two post's for on the tank?

 

[Burnie]

Unrelated to the Origen, but the CopperVape Bottles do not work in the COV Wraith. They are very similar, but there is just enough difference where the juice will leak down the bottle instead of up the squonk hole.

I tried one of these yesterday, $2.82 E-liquid Refiller Bottle for Electronic Cigarette (10-Pack / 10mL) 10-pack at FastTech - Worldwide Free Shipping and it seemed to work without any leaks. I had gotten them back in 2013, had a test mix in one, and tried it, glad I have more empty ones. I'll let you know if it starts leaking at a later point.

I put a pic of my build below. It was not very easy to set it up this way, so if any of you that have more experience with this RDA have suggestions, I welcome them.

I do dual coils, and the only single i did was to remove one of the coils, but that looks like a good build to me.

 

[oplholik]

I install a coil in front of the posts, works great for me, and it's easy.

 

[Burnie]

What are the two post's for on the tank?

View attachment 617729

From what i understand,
1. To fill the tank
2. To feed juice to the coil

 

[oplholik]

Will be interested in hearing your experience with the tank. I may get one to play with.

 

[oplholik]

I got the 24mm dia. of the beauty ring down to 21mm. The door of the Reos slides up now.