Orion V2 roll call

[tierrataz]

Thanks the_great for those pics. This is a mod I want to do to my Mark T to run mesh. ;-)

 

[brian272465]

A clearer pic of the elevated nuts and screws I made a few weeks back.

View attachment 128167

This is my older tune. springs are much easier to find.

View attachment 128173

I did "the_great tune" to my orion this paired with a 3 wrap twisted coil is the best vape I have had . All I can say is wow . Thanks for sharing this it makes warping your coil high much easier and thanks jslick for the nuts and bolts to do this.

Sent from my HTCEVODesign4G using Tapatalk 2

 

[Greenbox619]

hey jslick....where did you get the nuts and bolts to do this tune and what are the specs? I'm very interested in trying this tune!

 

[rwechsler]

Here to confirm that the brass nuts from the DID do in fact fit the post on the orion v2.1. They're a huge improvement over the spring/washer setup.

 

[dspin]

Looks great RW - that seems to be the perfect way to go. Im not a fan of the spring and washers.

 

[*ASH*]

What I think that my Orion now work fine but with 5/6 6/7 warb -_- i dont know why but that how it's work fine with me !!

 

[emonty]

Ash

If you are happy I am happy!! Vape on Brotha!!

 

[*ASH*]

Here a pic for my setup now to make it more clear I think so far work fine

View attachment 128596

 

[*ASH*]

Ash

If you are happy I am happy!! Vape on Brotha!!

Yes exactly bro as u said to me before it's just need practice, what the point from have the best if can't make it work as the best

 

[emonty]

Here a pic for my setup now to make it more clear I think so far work fine

View attachment 128596

looking great Ash!!!! very nice coil/wick setup if you like it vape it!!!

 

[*ASH*]

looking great Ash!!!! very nice coil/wick setup if you like it vape it!!!

And now just now after I saw emonty comment I make it to work just PERFECT as it's should be lool I just moved the Cup so I made the Hole of cap to be straight with the mesh and it's just work perfect with alot of Vape .So it's not always need to close the cap so tight to make it work better for me in last round for it I just made it straight with mesh and it's just came with alot of vape.
Now all will now why emonty is my IDOL YES

Hope this advice will help alot here lool some time even who asked alot can give an good advice

I think emonty today umade my day just perfect one's with ur PM and now when u made me think a lil pit to make it Vape better and glad u like the setup I told u soon I will be just so good as u expect me to be bro.

Am happy

 

[emonty]

The Orion delivers the best flavor in the world!!!



and that is what it is about not only the vapor as that is just hot air

 

[*ASH*]

The Orion delivers the best flavor in the world!!!



and that is what it is about not only the vapor as that is just hot air

That what I was looking for and that what I get finaly it's about the Vapoer and the test and I made it

 

[the_great]

The Orion delivers the best flavor in the world!!!



and that is what it is about not only the vapor as that is just hot air

true monty

 

[emonty]

And!!!! Less is the best guy to deal with, besides that he knows what he is doing he is a true Master!!!

 

[Turbo]

hey jslick....where did you get the nuts and bolts to do this tune and what are the specs? I'm very interested in trying this tune!

I don't know what he sent 'brian', but in his picture a couple pages back he mentioned 2mm hex screws (6mm long) and he used two nuts by the looks of it.

Correct me if I'm wrong 'jslick'.

 

[brian272465]

All you need is 2 m2 nuts .you can get them on eBay for $ 3 for 20 of them

 

[jslick_007]

I don't know what he sent 'brian', but in his picture a couple pages back he mentioned 2mm hex screws (6mm long) and he used two nuts by the looks of it.

Correct me if I'm wrong 'jslick'.

That's correct! I didn't have the "spacer" that The_Great used so I had to improvise. And I got them from RTLfasteners.com. Also, I found a local RC car shop that also stocks those parts so you can try your local hobby store.

 

[jslick_007]

Here to confirm that the brass nuts from the DID do in fact fit the post on the orion v2.1. They're a huge improvement over the spring/washer setup.

Didn't Imeo say something about not using brass for things that go in contact with juice? Also why Jim switched to SS with the latest batch of DIDs?

 

[rober36]

Didn't Imeo say something about not using brass for things that go in contact with juice? Also why Jim switched to SS with the latest batch of DIDs?

Imeo won't because there is some lead in brass and that could potentially leach out. I don't know if having nuts on the positive post would be enough for concern, but it's something to consider. The nuts on the post are not inside a tank where they would have lots of liquid on them for extended periods of time so maybe it's not a problem.