Emonty: When you use the solid mesh build, did you cover the other wick hole?
Orion V2 roll call
- Thread starter tierrataz
- Start date
- th_trl_thread_readers 0
- Status
I keep the other wick hole open, actually I always do as it performs way bitter that way IMHO
I just tried with the other screw that bring up the coil, I can't believe that only few mm. higher make such a difference... It bring way more vapor... The coil is 4/5.
Last edited:
My Orion tank split. The orings are bad. Can some please pm me where I can get a new tank and new orings please! It's new and I'm freaking out right now
Thread #176, Post #1752 by Turbo for the Orings. For tanks, Look for Terry over @ UKVapers.
My Orion tank split. The orings are bad. Can some please pm me where I can get a new tank and new orings please! It's new and I'm freaking out right now
PM me your address. I can't help you with the o rings but I have a spare glass tank for you.
Sent from my SGH-T999 using Tapatalk 2
I'm curious if you guys are drilling your air holes?
Crypto, emonty?
I think vapor/flavor and throat hit are all on point but the draw is a little tight. Problem is I don't really want to change the flavor I'm getting now and something tells me changing the air hole is going to mess with that.
For reference: Using 3/4 wrap of braided 34g which is about the same as 3/4 wrap of 32. Liking the braided 34 over the straight 32. Vape seems more saturated.
Crypto, emonty?
I think vapor/flavor and throat hit are all on point but the draw is a little tight. Problem is I don't really want to change the flavor I'm getting now and something tells me changing the air hole is going to mess with that.
For reference: Using 3/4 wrap of braided 34g which is about the same as 3/4 wrap of 32. Liking the braided 34 over the straight 32. Vape seems more saturated.
Not any of the guys you quoted but if you're thinking of drilling it out, try it on a 10ml bottle or the Vivi tank has same threads as top cap. You do risk loosing flavor w/ a larger hole, there's a fine line. Seems like 1.2mm would be the max, but try it out on plastic before drilling.
+10 on this...
I personally like it the way it was designed, but if you're going to try it, why not do it in an easily reversible manner...
I personally like it the way it was designed, but if you're going to try it, why not do it in an easily reversible manner...
I'm happy to hear from anyone, they had just posted on the previous page so I thought they might be around
Yea I've got some bottles and old vivi nova's laying around. I'll try that.
As I said I'm not really sure about drilling so I'm not going to for the time being. I like everything about it...fantastic vapor, GREAT flavor and throat hit. Just having trouble adjusting to the draw.
I suspect that messing with the draw will change the flavor though which is the part I like the most.
Yea I'll do that before anything else. I wasn't really going to try it in the near future, I was just gathering information.
I like everything about the vape just wish it wasn't quite so tight. However I do understand that the tightness of the draw contributes to the way it vapes so it's probably a trade of. Mute flavor and get more open draw? Not sure if it's a good trade off. I won't be doing anything for a while of testing, if I do anything at all.
Keep mine stock here. On the V2, I did open the mouth piece up though. V2.1 hasn't been touched other then to add an extra o-ring to help seal the switch better...
That's about the only modification I wanted to make but I can't find the right silicone tube that Nosmoker is using in the new V2.1. He said ebay but the measurements he gave, I can't find. The switch worries me a bit.
He says "silicon tubing can be found on eBay dimensions are 1.8 x3,5mm and about 3cm long"
So I assume that means 1.8mm ID of tube..no problem. But anything with a .5mm wall will have 3.37 mm OD, I think. Maybe that's close enough? Not sure.
I'll either find the tube eventually or settle for o-rings and maybe a little silicone. I like the tube idea though.
I used an extra o-ring and some silicon here. No problems since. I check it occasionally to ensure I am not getting any leakage. I was one that had an early on switch failure on the V2.1 also.
FWIW, I bored mine to 1/16" and it still has better flavor than all my devices.
You could get on the list for one of those drip tip top caps and try boring out that one.. I'd buy it if you didn't like it lol
Sent from my SGH-T999 using Tapatalk 2
You could get on the list for one of those drip tip top caps and try boring out that one.. I'd buy it if you didn't like it lol
Sent from my SGH-T999 using Tapatalk 2
Hmmm...
The list on this board or elsewhere? Mind PM'ing it to me? That's a good idea.
I'll get a couple. If I don't like the 1/16th I'll just send it to you.
Edit: NM Found the list.
Last edited:
- Status
Similar threads
