Out of all the mods and toppers you own.... What is your favorite setup?

[Baditude]

Rocketpunk and I have similar tastes and experiences.

Three Provari's with IBTanked cartotanks. One MVPv1 with IBTanked.

I also have tried rba's. Mixed results. In all, I found them to be too time-consuming and fiddly (for me). I just want to vape; a new cartotank setup takes me 5 minutes and zero maintanance thereafter. A new coil and wick in the rba would take me at least 1/2 hour.

 

[eMats]

Provari/IBTanked XL/Smoktech carto/Panasonic 18650 3400 mah batt - for work, I get 2 days easy - especially since I drip or Kayfun at home so I save battery time there.

 

[StarsAndBars]

MVP version 1 and Sigelei Mech mod. Honestly, the mech mod gets almost all of the use these days. With a twisted .9 ohm coil it's pretty hard to beat in terms of vaping bliss.

BTW using an Igo-L mostly. Strong proof that a ridiculously good vape can be had with a $14 RDA

 

[KiLLeRr KeN]

VTR with my protank3 :] love the flavor. I cant wait to pick up my NES mod in june though!

 

[rastapete69]

Provari with Russian 91 filled with Bobas Bounty all day.
Sigelei mech topped with Igo W .5 ohms dripping at night.

Couldn't be happier

 

[donnah]

I have several setups that I use and enjoy pretty much equally. A Provari and a kayfun/R91%... A Roller (kicked and unkicked) and a kayfun/R91%... A Provari and a DID (wicked with cotton) and my Reo Grand with a RM2.

If I HAD to get rid of everything and keep just ONE device and topper? That's tough! I want to say I'd keep a provari and kayfun but I believe it might be the Reo/RM2 that I'd keep But only because it's so simple and currently has my favorite juice in it

 

[KenD]

Until recently it was my Kayfun 3.1 (clone) on my Hammer (clone), but then I got an Aqua RBA. Waiting for an Origin mod that I'm sure will be great, but as I'm nearing my mid-age crisis I'm expecting the Hammer to remain my favourite mod...

Edit: oh, and I run the Aqua at 9.4 ohms (dual coil), and my. Aquas are set with 1 and 1.2 ohm coils.
Sent from my GT-I9100 using Tapatalk

 

[Mechmaster]

Right now I'm vaping on a cheap gas station ego style PV.... and that being said, this thing isn't doing bad at all. But my main setup is a Smoktech SID w/ PT3 @ 15w. I do use my Scar RDA every now and then when I feel like tinkering with something. I can't wait for my MVP v2 to come in next week though.

 

[StarsAndBars]

Until recently it was my Kayfun 3.1 (clone) on my Hammer (clone), but then I got an Aqua RBA. Waiting for an Origin mod that I'm sure will be great, but as I'm nearing my mid-age crisis I'm expecting the Hammer to remain my favourite mod...

Edit: oh, and I run the Aqua at 9.4 ohms (dual coil), and my. Aquas are set with 1 and 1.2 ohm coils.
Sent from my GT-I9100 using Tapatalk

9.4 ohms? How's that working for ya?

 

[TruSound]

I don't have many, as a matter of fact only two...a genuine Nemesis matte and what you see below, a JD Tech Stingray topped with a KFL+ upgraded with a titanium top cap...the Stingray setup is pure vaping bliss for me, all day every day.

 

[cope]

zombie mini topped with a russian 91 @ 1ohm 2.9v

 

[super_X_drifter]

Try messing with either of these two mechs of mine and were fighting. Your have to beat me till I lose consciousness to get either one.

REO grand with a cyclone and an oliveR by pdib with a mark bugs chalice.

A bottom fed RBA can be completely rebuilt with a micro coil and cotton wick in about 5 minutes if you take your time - just look how simple it looks:

And that coil will last a month ( or more ) and the wick lasts easily a week.

Refilling the onboard 6 ml juice bottle and putting in a fresh 18650 once a day takes about 2 minutes if you take your time.

 

[Vwls]

I have to say it... and this is hard for me because I love my Caravelas more than life, and like super_X_drifter said about his mods, you would have to practically kill me to separate me from them. Any good dripping atty on top of those gorgeous, power-house mods is pure vaping heaven. Cyclone with AFC and the 3D have been my go-to's of late...

But tonight I fired up a cute little white Reo Mini 2.1 with an AW IMR 18490 battery in it (punches out 16.5 amps, which is bad-a$s for a small battery), and a simple RM2 atty on top (air hole drilled out to 3/32"). Coil is drill-twisted 24 gauge Kanthal - 7 wraps on a 5/64th" precision screwdriver. Wick is CVS rolled cotton. And damned if it isn't the easiest, most powerful, most perfect vape in the whole wide world. Fresh dripped flavor - massive clouds - squonk to re-saturate... paradise.

 

[super_X_drifter]

I have to say it... and this is hard for me because I love my Caravelas more than life, and like super_X_drifter said about his mods, you would have to practically kill me to separate me from them. Any good dripping atty on top of those gorgeous, power-house mods is pure vaping heaven. Cyclone with AFC and the 3D have been my go-to's of late...

But tonight I fired up a cute little white Reo Mini 2.0 with an AW IMR 18490 battery in it (punches out 16.5 amps, which is bad-a$s for a small battery), and a simple RM2 atty on top (air hole drilled out to 3/32"). Coil is drill-twisted 24 gauge Kanthal - 7 wraps on a 5/64th" precision screwdriver. Wick is CVS rolled cotton. And damned if it isn't the easiest, most powerful, most perfect vape in the whole wide world. Fresh dripped flavor - massive clouds - squonk to re-saturate... paradise.

Damn V, that's just so....SEXY woman

 

[Mikey6]

Kraken riding on my Nemesis (both clones, I can't afford the real deals yet) looks sexy and flavor, Vapor and throat hit are right in my sweet spot. Dual ss mesh wicks with .7 ohm coils. Killer Juice Apple Cinnamon at 12 mg.

Sent from my SCH-I605 using Tapatalk

 

[stevegmu]

ProVari with IBTanked.

 

[etherealink]

IGO-F and AGT.

OK, gotta dig the builds but I'm still wrapping my head around the concept of micro coils. Stop me if I'm wrong but, ohms is basically measured as gauge of wire over the length of the wire, with higher gauge (ie: 32 > 28) making a higher resistance rating.

So, if you take the same length of 32ga it has a higher resistance than 28ga. Also why longer extension cords must have a lower gauge (larger diameter) to handle the same voltage and amp draw without literally burning them up (ie: the wire breaking from thermal failure, which is what breaks coils).

I guess what I'm getting at is how do you use the comparable length of wire to make the micro coils (even considering that duals cut the resistance in half) and keep the coil:

A: Large enough to give the surface area for heating that micros are known for

B: Low enough in resistance to pull that 1.3ohms

C: Still large enough to put in what appears to be a rather close to 2mm wick with the set up.

Sorry about the long post I've just been interested in a while and not found the info I was looking for... 70+ hrs a week at work doesn't help. Just hoping you've got a link or a smack on the head lol

****
Fogging out my Bulldog with an Igo-W on a k101 or an I30 when I don't have time to drip.
****
About analogs vs ecigs :
http://www.janty.com/en/news/item/vapor-test-results-by-keca

 

[tricci]

Semovar V3 with a Kayfun 3.1es (1.5 ohm micro-coil).

 

[BigLiquid530]

BCV XXIX with my KFL

 

[^Top-Shelf^]

K100 (silver) 18350 mode topped with my 2014 addition Kayfun Lite Plus.
Boy did I not know what I was missing until the Kayfun came in the mail the other day! Compared to the cartos I was using I'm loving all my juices 10x more can't put it down