P4U/Green Leaf IPV2 50W - Product Spec, Performance, Usage & Issues Thread

[nopoison]

I guess the ipv2 is getting some upgrades.

Here is a list of improvements in the new version:

-Improved Battery Compartment Area

-Battery Compartment Held Down with 4 Screws instead of 2

-Added a Battery String to remove the Battery Easier

-Newer Look With a Thicker Shell

-New Back Cover Screws that are Stronger Hex Screws

They did nothing good imho.
Magnets preferable or just 2 bigger screws.
A 510 connector that stays where you adjust it.
A spring for the battery that doesn't need stretched once a week.
Ha!

 

[STEAM_P0WERED]

So it will still have only two larger screws and the four screws will be on the inside i guess.

 

[nopoison]

So it will still have only two larger screws and the four screws will be on the inside i guess.
View attachment 375113

View attachment 375115

Hexagon? Who needs that? Dumb ... ....! Maybe, just maybe post holes on a rba but come on!! Sorry im in a funky mood tonight!

 

[herb]

They did nothing good imho.
Magnets preferable or just 2 bigger screws.
A 510 connector that stays where you adjust it.
A spring for the battery that doesn't need stretched once a week.
Ha!

I agree , nothing really worthwhile at all actually . Still the useless long plastic window on one side and a more firm interior , didn't realize the interior needed more screws , seemed very solid to me .

What happened to the SX330S upgraded model with the weatherproofing ? Any news on Asmodus , i keep hearing a one time warranty claim but that can't be right.

 

[eLCruz]

After further contact with assMODus:

Blatant disregard for customers...

Sent from Gallifrey using a Sonic Screwdriver via Tardis #5 :what:

 

[CaCHooKa Man]

Here's comparison pictures of the newer version from Reddit

http://www.reddit.com/r/electronic_cigarette/comments/2gtals/ipv2_v1_vs_ipv2_v12/

 

[Hammerfyst]

I like the old one better.

 

[suspectK]

I like the old one better.

Lol..joking..right?

 

[cynik]

This should have been the release version. It baffles me how these mod manufacturers continue to release beta-quality products when all it takes to figure out the faults is a few days using the mod and a bit of common sense. It's not like this is their first mod, either.

EDIT: ... Hex screws? Fixed one issue only to replace it with another. I give up.

 

[CSULAguy]

I know, I'm lazy and didn't want to read all 75 pages. With that being said, I apologize if this has been asked already. I ordered one of these on ebay, after seeing it in my local vape shop.

Anyways, I'm wondering how long of battery life I should expect on a .4 or .5 build. I'm looking at a parallel 24g build, about 6 wraps, and I think I could get away with a VTC4, right? Or would I need a different battery?

 

[suspectK]

Yeah...vtc4 lasts me 1/3 a day vaping normal...but usb...convenient.. my battery doesn't ever come out.. except to inspect it randomly.

I recommend the Samsung 25r.

 

[snipeslayer]

I was running VTC5's and unless I was chain vaping I would get a good 10-12 hours out of it on a 0.5 ohm build at 30-40 watts. I do have some Samsung 25r's in transit currently though, I will update upon arrival.

 

[Hammerfyst]

Lol..joking..right?

No Actually. I have more Philips head screwdrivers than I do Hex drivers. I also like the battery cutout. Looks like more care has gone into it. Now If I get it back from ASSMODUS and it is operational, I would be happier with it.

 

[suspectK]

I suppose I understand...but looking at pictures isn't good for that type of comparison... it's mounted by 4 screws...and protecting internals more than the first release. Edit- almost looks like it won't allow any liquid inside plastic housing.

And hex/allen screws are easy-peasy to replace my brother..

 

[herb]

This is a mediocre at best fix it solution by P4U , why not just apply a waterproof heat resistant tape across the top seam on the previous versions to block juice intrusion .

This 4 screw plastic shield still looks like it will allow juice penetration.

 

[herb]

No Actually. I have more Philips head screwdrivers than I do Hex drivers. I also like the battery cutout. Looks like more care has gone into it. Now If I get it back from ASSMODUS and it is operational, I would be happier with it.

How long has your mod been at Asmodus ?

 

[CSULAguy]

Yeah...vtc4 lasts me 1/3 a day vaping normal...but usb...convenient.. my battery doesn't ever come out.. except to inspect it randomly.

I recommend the Samsung 25r.

Which battery is the 25r? High drain? I saw a Samsung at my local vape shop, but I didn't ask if it's the 25r. I'm presently using an unregulated mod and stick with the VTC4. So with the 25r, what would I be looking at for normal vaping?

 

[suspectK]

https://www.google.com/url?sa=t&sou...BQpEzH3LdPpi27bow&sig2=TYS1U13NqZp3u0wvRIoFjQ

I'd like to see a pulse test on them.
http://www.illumn.com/18650-samsung-inr18650-25r-2500mah-high-discharge-flat-top.html

 

[Hammerfyst]

How long has your mod been at Asmodus ?

It was only there a week but mine was bad when I got it. The only reason I got it back fast was I paid for shipping both ways before they could hold it hostage.

 

[herb]

It was only there a week but mine was bad when I got it. The only reason I got it back fast was I paid for shipping both ways before they could hold it hostage.

Well thats certainly better than waiting a month before they even get to look at it , sounds like you got a quick replacement despite paying shipping both ways . Makes it easier to handle if they take care of it quickly , the waiting forever and paying shipping both ways had me outraged lol.