after Easter vacations my sellers will have again stock of penelope V3 Jeff. As for short mode, I need more time buddy
Penelope V3
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
Looking for some help with my V3. I've got a 1.4 ohm micro coil and am running it on a SS Just GG with an AW IMR 18490 with a Kick2. The Kick2, which measures draw voltage, keeps going into stutter mode for low volt cutoff when the batteries are still at 3.7-3.8 volts. I checked the Kick2 in my other Just GG with Ithaka, and it works just fine therein. Is there something special about the connection or the adjustable center pin that I should be paying attention to?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Assuming that your Penelope is working ok at your other JGG and If your batteries are working from fully loaded to 3.7-3.8 volts, that means you have conductivity but somewhere not a good one.
Try to clean all the contacts from JGG axis and button's pin to adjustable ad pin of your Penelope.
Try to clean all the contacts from JGG axis and button's pin to adjustable ad pin of your Penelope.
Will you ever make a mod that takes something like the penny and sits it parallel to the battery for pocket use? It would pair with 18500 battery very well and make for a very small double tube device.
You mean like a sticker. I don't know why imeo never approached the sticker design or the box design. I would be interested to see imeo's take on them.
Sent from my SM-N9005 using Tapatalk
I am busy with constructions that I like most, so a box mod is not a priority for me guys
I am busy with constructions that I like most, so a box mod is not a priority for me guys
We have to find a way to make you like it. Ok whatever you like then, when proteus electronics are release I will make my own proteus box mod. Maybe a bottom feeder!! I will be rich!!!
(i call dibs on the idea)Sent from my SM-N9005 using Tapatalk
I am busy with constructions that I like most, so a box mod is not a priority for me guys
Oh yes, I couldn't agree more; I really HATE boxes!
If you're going to make a box mod, it would be the first GG I do NOT want to buy!
P.S. Sorry Aal
Last edited:
I dont know who vapes bottom feeder box mods but I am not one of them and if I make something like this, it would be only to make some quick money. 
We have to find a way to make you like it. Ok whatever you like then, when proteus electronics are release I will make my own proteus box mod. Maybe a bottom feeder!! I will be rich!!!
Sent from my SM-N9005 using Tapatalk
not asking for a box mod but something similar to the sticker and/ or microstick. Vaping in general is either a tube or box but mainly tube. Why not make a bridge or adapter for pocket use. If you want your products to leave the house then you have to make them portable. I would love to see gg outside and about. It's by getting these devices outside to the public eye that you not only increase sales but bring others to gg. IMEO I am happy you are building what makes you happy but that's not the way to "satisfy every vaper out there". I own 2 Peny v3 so clearly I am a fan but where I work a small flashlight stick only falls over in my pocket making it awkward for me to carry. I'm sure others feel the same. So before some of you gg fanatics start tearing me apart I'd like to say that I love what IMEO has provided but has yet to provide me a method to carry around my PV in my pockets comfortably at work and outside the house so I must say that I am yet to be satisfied.I am busy with constructions that I like most, so a box mod is not a priority for me guys
Box mods are like trucks where as the regular mods are like sedan. Well, GG is like luxury sedan.
They all have their area of specialties and, if well made, they can be quite effective on their own.
I have a Reo Grand and it is a very nice bottom feeder mod that are great for rough environments. I welcome all these varieties that will meet different type of people and enable vaping community to grow.
Having said that, as for BF, box, or sidewinder GG, I much rather see Imeo continuing to perfect the style he is comfortable with, instead of trying to be a jack of all trade. If someone really wants BF or box mod, there are options out there.
Who knows, Imeo might wake up one day and say "you know, I really like the shape of a box."
But unlike others, Imeo spends years (not weeks or months) working on a style. That's why GG is at "GG quality". So, whipping out another "me too" box mod quickly wouldn't be Imeo style nor GG quality. If that was the case, Proteus would have been yet another VV mod with DNA chip in it.
They all have their area of specialties and, if well made, they can be quite effective on their own.
I have a Reo Grand and it is a very nice bottom feeder mod that are great for rough environments. I welcome all these varieties that will meet different type of people and enable vaping community to grow.
Having said that, as for BF, box, or sidewinder GG, I much rather see Imeo continuing to perfect the style he is comfortable with, instead of trying to be a jack of all trade. If someone really wants BF or box mod, there are options out there.
Who knows, Imeo might wake up one day and say "you know, I really like the shape of a box."
But unlike others, Imeo spends years (not weeks or months) working on a style. That's why GG is at "GG quality". So, whipping out another "me too" box mod quickly wouldn't be Imeo style nor GG quality. If that was the case, Proteus would have been yet another VV mod with DNA chip in it.
Thank you cif
I make what I like and I think most vapers like what I like. Of course there are people like you that like something like box mods. And because I am going small as you know, thats why I made esterigon and proteus. I think they are pocket friendly enough?
I make what I like and I think most vapers like what I like. Of course there are people like you that like something like box mods. And because I am going small as you know, thats why I made esterigon and proteus. I think they are pocket friendly enough?
exactly as you said Zero. And also be sure that proteus is not just a VW device. I will let you know when time comes
Box mods are like trucks where as the regular mods are like sedan. Well, GG is like luxury sedan.
They all have their area of specialties and, if well made, they can be quite effective on their own.
I have a Reo Grand and it is a very nice bottom feeder mod that are great for rough environments. I welcome all these varieties that will meet different type of people and enable vaping community to grow.
Having said that, as for BF, box, or sidewinder GG, I much rather see Imeo continuing to perfect the style he is comfortable with, instead of trying to be a jack of all trade. If someone really wants BF or box mod, there are options out there.
Who knows, Imeo might wake up one day and say "you know, I really like the shape of a box."
But unlike others, Imeo spends years (not weeks or months) working on a style. That's why GG is at "GG quality". So, whipping out another "me too" box mod quickly wouldn't be Imeo style nor GG quality. If that was the case, Proteus would have been yet another VV mod with DNA chip in it.
I truly meant no disrespect IMEO. I also DO NOT want from you a box mod. What I would like to see from you is a way to make your mods like very few other modders have done and make a connector that's has the option to put the gg atomizer by the gg battery tube thus reducing the size in length but able to continue to use my current gg products. I enjoy the simplicity of gg products and IMEO's minimalistic designs.. That is my wish. Take it with a grain of salt IMEO you have earned the right to do what you love even like. I just would like to see a sticker/base/u-connector because you have proven yourself time and time again. Thank for your time and you will here no more of this from me because i think you may have misunderstood me the first time. Thank you again.
We have to find a way to make you like it. Ok whatever you like then, when proteus electronics are release I will make my own proteus box mod. Maybe a bottom feeder!! I will be rich!!!
Sent from my SM-N9005 using Tapatalk
Ha I agree I would love to see a GG box mod but I don't think we will ever convince Imeo.
I would like to see U design GG take on Penelope:
battery 14500 with 510 connector 17MM to the bottom side of it.
there are many designs out there but no one have all or such variety in one brand like we do.
the last year we got Ithaka tank upgrade to one of a kind tank system that can take R and NR
with different attys configurations.
we had two Penny version riding out fresh from the oven.
small tank for the V2
JGG in 3 metals
JGG 1 18650 tube
iatty again
Odysseus again
many other parts
now Proteus
and Esterigon
this is unparalleled to any on the market.
we have the most unique inventory of vaping Items from one solo man.
Imeo does what he like but also what we like Ithaka with R?? Penny with R? one tube 18650 ?
this all things he did not want to do but did on members request.
there are more request from Imeo then any because we all know that he can make
the better of any design.
but "espera un poco" (wait a bit)
I'm sure time will come for many more,it's the nature of our designer
edit:
the U designe with the GG electronic inside should have add that in the begining
and 17mm for Penelope with 14500
or capability to change the baterry tube in the U from 14XXX to 18XXX
battery 14500 with 510 connector 17MM to the bottom side of it.
there are many designs out there but no one have all or such variety in one brand like we do.
the last year we got Ithaka tank upgrade to one of a kind tank system that can take R and NR
with different attys configurations.
we had two Penny version riding out fresh from the oven.
small tank for the V2
JGG in 3 metals
JGG 1 18650 tube
iatty again
Odysseus again
many other parts
now Proteus
and Esterigon
this is unparalleled to any on the market.
we have the most unique inventory of vaping Items from one solo man.
Imeo does what he like but also what we like Ithaka with R?? Penny with R? one tube 18650 ?
this all things he did not want to do but did on members request.
there are more request from Imeo then any because we all know that he can make
the better of any design.
but "espera un poco" (wait a bit)
I'm sure time will come for many more,it's the nature of our designer
edit:
the U designe with the GG electronic inside
should have add that in the begining and 17mm for Penelope with 14500
or capability to change the baterry tube in the U from 14XXX to 18XXX
Last edited:
I was wondering does anyone know if Imeo will make any more penelope v3? I want one :/ and it been out of stock for awhile so hope it not out of stock forever!!!
- Status
