Penelope V3

[JMBH]

I cant really answer about the difference buddy. But its not the cap.

Mathematically is 2,05 and with your syrigne is 1,8

Ah sorry , I think I didn't explain well .. was not talking about the cap . I said cup , because looks like a cup thought . the part of the mouth piece that threads to the housing . This section I'm mentioning in the standard long mouth piece has 12 mm. tall . on the new short mouth piece is 13 mm. tall so that I think is the reason why it doesn't take 2.ml. it takes exactly 1.8 ml . I can adjust it to 12 mm. its simple to do . I just wanted to be sure what is your design measure for this section 12mm or 13 mm. ? Now I have both penelopes full of liquid . but i can make a drawing so yo can see exactly what I mean

 

[imeothanasis]

ah, I understand now JM

ok, let me check it and I will report back

 

[imeothanasis]

you are almost right JM. The fat place of the new mouthpiece is 1mm longer. So it takes exactly 1,9ml

 

[JMBH]

you are almost right JM. The fat place of the new mouthpiece is 1mm longer. So it takes exactly 1,9ml

Ah , ok so thats how its designed then I can adjust it to 12mm. easily or better live it like that .. What do you think ?

 

[imeothanasis]

I made it a little longer in case someone wants to put very fat wires, so the nuts that keep wires get high and touch the mouthpiece JM. So better leave it as it is

 

[JMBH]

How ever ,I believe that Penelope V3 short, with all features it has is the smallest and most precious 2ml. rba available ! I really like it
I'm planning to get another short kit when next batch is released . So I will have two short pe v3 when I go out . One on the proteus ( I hope soon ) the another one ready to use as spare kept in pouch with extra batteries .
Perfecto !

 

[JMBH]

I made it a little longer in case someone wants to put very fat wires, so the nuts that keep wires get high and touch the mouthpiece JM. So better leave it as it is

Ok Imeo , Thanks again for the info . I will leave it how it is . 0,1-0,2ml. is nothing

 

[imeothanasis]

yes, its the smallest 2ml tankomizer JM. And the smallest by far if I know well

How ever ,I believe that Penelope V3 short, with all features it has is the smallest and most precious 2ml. RBA available ! I really like it
I'm planning to get another short kit when next batch is released . So I will have two short pe v3 when I go out . One on the proteus ( I hope soon ) the another one ready to use as spare kept in pouch with extra batteries .
Perfecto !

 

[labin]

Does anybody have an idea, why I can't change (twist) the poles position, even if the centerpin is totally unscrewed?
I'm a bit afraid to apply to much force.

 

[monkkx]

Push the center pin to allow the poles to freely rotate without friction at the bottom. I think the base is kinda stuck ...

 

[FogNL]

Imeo, when will the V3 be available again. I'm afraid I need another one...

 

[j3suss]

hi guys!,
Hi Imeo!,

I had a penelope one but sold it because the system was tedious to set it Now I have bought a v3 and I am very happy, it's perfect and most use, I have always been waiting for one like this! Thanks Imeo.
I have a problem and I would like some advice. I use cotton, cut flush, microcoil 1.5 ohms and that is my setup. My problem is: when I keep penelope horizontally v3 works great! but when I use it upright, I hear gurgling, if I were to use horizontal disappears. Is this normal? thank you very much!

 

[monkkx]

If it's flooded, remove the excess juice by inserting a paper towel in the mouthpiece. Then adjust the juice control so that it works in both positions without gurgles.

 

[proteckt3d]

hi guys!,
Hi Imeo!,

I had a penelope one but sold it because the system was tedious to set it Now I have bought a v3 and I am very happy, it's perfect and most use, I have always been waiting for one like this! Thanks Imeo.
I have a problem and I would like some advice. I use cotton, cut flush, microcoil 1.5 ohms and that is my setup. My problem is: when I keep penelope horizontally v3 works great! but when I use it upright, I hear gurgling, if I were to use horizontal disappears. Is this normal? thank you very much!

Cut the cotton longer and stuff it inside the rebuildable part while still having the ends cut flush at the channels. Something like this setup here https://www.youtube.com/watch?v=xKVi5aCYFQs&list=UU-PMZ4hlGoA-PLSNyUDMt9g
When you open the liquid flow, turn the mouthpiece once and make small adjustments from there so that you let just enough liquid in to keep the cotton soaked. The only thing that you have to be careful is that you don't cover the airhole with cotton

 

[j3suss]

Thanks!!

I've tried everything, but to no avail.
I have looked at the O-RING of the top, it´s ok.
I have cotton in the canal, just cut flush. If I enter a little into the housing works well not me (single cut).
I have removed all the housing, and all is well. Regulate the hood well with 1 turn maximum.
I would appreciate anything that is uncomfortable I do not know what else to do ...

Thank you very much.

 

[j3suss]

28 gauge kanthal A1 tension wrapped around 1.58mm (1/16) drill bit. 9 wraps 1.1 ohms.


Test run



Installing the wick

Cutting the wick to size a little off the edges

Pushing wicks to form a blocking effect against floods while keeping channels empty





This is how I do it and this is how it works every time . Blocking the flood of liquid is important when ur coil is small in diameter or else no need.

I'll be grateful you did a video on how to enter the cotton in the housing.
Is the cotton has to get into the housing below?

Thank you!

 

[Aal_]

I'll be grateful you did a video on how to enter the cotton in the housing.
Is the cotton has to get into the housing below?

Thank you!

Cotton does not go into the housing below. It just makes a big bump at the entrance.

 

[proteckt3d]

I'll be grateful you did a video on how to enter the cotton in the housing.
Is the cotton has to get into the housing below?

Thank you!

Like aalwani says j3ssus. You can have an idea from here

This is how I have been building mine - I like to keep it simple.
https://www.youtube.com/watch?v=y538DuLOkuI

 

[j3suss]

I have tried very many different setups. I put the cotton in a thousand different ways but the gurgling is continuous in all setups. I do not know what else to do, I think that penelope is not for me...
sometimes it works fine but after a while again there gurgling. close the drip, drip blow by with a napkin and no liquid comes out, I can not do more things: (

A greetings.

 

[villarino1k]

I have tried very many different setups. I put the cotton in a thousand different ways but the gurgling is continuous in all setups. I do not know what else to do, I think that penelope is not for me...
sometimes it works fine but after a while again there gurgling. close the drip, drip blow by with a napkin and no liquid comes out, I can not do more things: (

A greetings.

this is exactly how I feel about my ithaka. Matter of fact, every GG atomizer I've had from ithaka, penelope, and iatty did the same thing. It sucks but I really think these aren't for me anymore

Although I might try the tilemahos and if that doesn't work out...I might have to look elsewhere.