Been using on pg. Understand vg gives better vapor. Is a 5050 mix a good idea. Usually use tw 36mg straight pg
Pg vg
- Thread starter Tonytiger1
- Start date
- th_trl_thread_readers 0
- Status
Everything is personal preference, but I think it's the perfect blend. The higher vg will give you better vapor (higher density) and you shouldn't sacrfice th much if you are using 36mg nic.
cheers,
cheers,
Generally speaking, PG is a cleaner, thinner medium that wicks very well, increases TH, enhances flavor and is very atty-friendly and easy to use. VG is thicker and more difficult to work with, especially in cartomizers and tanks. Some manufacturers specifically advise against using any VG (or very little) in their atomizers/cartos (Bloog, Janty w/Puromizers, and others).
The most user-friendly and versatile mix is 80PG/20VG. You can experiment a little, depending on what PV you are using; your sweet spot will be probably somewhere between 80/20 and 50/50. And if your VG liquid seems too thick, you can always thin it out with a few drops of distilled water or vodka (up to 10%).
Do you like that 36 mg eliquid? That's very high, as you probably know. Try adding a little VG to it to increase the vapor production and decrease the nic content. The flavor will diminish somewhat, but you'll find the consistency and the strength that you like.
Good luck.
The most user-friendly and versatile mix is 80PG/20VG. You can experiment a little, depending on what PV you are using; your sweet spot will be probably somewhere between 80/20 and 50/50. And if your VG liquid seems too thick, you can always thin it out with a few drops of distilled water or vodka (up to 10%).
Do you like that 36 mg eliquid? That's very high, as you probably know. Try adding a little VG to it to increase the vapor production and decrease the nic content. The flavor will diminish somewhat, but you'll find the consistency and the strength that you like.
Good luck.
- Status
Similar threads
