Phoenix 1.5ml BC/eGo Question

[The White Rabbit]

Searched all over for this info, can't find the answer. I use the Phoenix 1.5ml Bottom coils on my eGo Twist, they work great, but because they thread onto the little thread on the eGo they just don't LOOK right. Something like this covering the bottom of the tank would look slick, but apparently this specific product the diameter of the non threaded side is too small to allow the Phoenix to pass through. Ego Cone/Atomizer Cover Black or Stainless

Is there something like this that someone has found to work?

Also: What's the proper way to describe the little thread and big thread on the eGo? The big one is the 510 connection and the little one is the eGo style connection?

 

[Big Screen D]

Ratsey, the small threads are 510 threading. The larger outer threads are referred to as eGo threading.

Some vendors do carry cones for eGo batteries that have a slightly larger opening at the top. Ask in the Gotvapes forum. They likely have them, or one of the posters can probably help you out.

If you already have cones for your eGo, you could grind off some off the top so they will fit.

 

[REET_AZ]

I bought thread covers - and ego cones - I prefer now the steam punk look of the threads. The Phoenix BC on the ego twist is just awesome. Threads and all

 

[Big Screen D]

Really is a great little carto. I have vaped over 100ml of VG juice through one, cleaned and dryburned probably 20-30 times, and it still keeps trucking along.

 

[Disk4mat]

For the cone, check out this great tip spaceballsrules posted... Just might work for the phoenix.
http://www.e-cigarette-forum.com/forum/tips-tricks/312572-how-bore-out-ego-cone-easy-way.html

 

[The White Rabbit]

Grinding the top off: Duh, why didn't I think of that? Good idea. And thanks for the threading clarification.

Steampunk look: Yup, it does look a lil steampunk, hrm, just need some brass fittings... I personally get a very Sonic Screwdriver vibe from my Ego paired with this one or the 3ml. I WANT a Sonic Screwdriver mod.

Needlenose pliers: Also genius.

Since I haven't bought anything yet, I will continue to look for a cone/cover that does work. It really isn't that important to me. Next juice order... Thanks all.

 

[Jixchel]

These say kgo, but I believe they are the same threading as the egos KGO Cones Bigbore

There are also shorty cones that will cover the threads and give a better look eGo Thread Sleeve - Fts All Std eGos CHROME [gv-egoTHREADSLEEVE-CHROME] - $1.65 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more
and sleeves for the vision cartos GotVapes Vision eGo CONES - STAINLESS [gv-visioncone-stainless] - $3.50 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more

 

[jnnfrlsw]

I have one of the kgo big bore cones and just tried it on my twist /pheonix and its not big enough either.

These say kgo, but I believe they are the same threading as the egos KGO Cones Bigbore

There are also shorty cones that will cover the threads and give a better look eGo Thread Sleeve - Fts All Std eGos CHROME [gv-egoTHREADSLEEVE-CHROME] - $1.65 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more
and sleeves for the vision cartos GotVapes Vision eGo CONES - STAINLESS [gv-visioncone-stainless] - $3.50 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more

 

[Jixchel]

I have one of the kgo big bore cones and just tried it on my twist /pheonix and its not big enough either.

Thanks jnnfrlsw, I'm not familiar with the kgo products, so it is good to know so that I don't steer someone in the wrong direction. Hopefully you caught the bad info before he bought it!

Do you happen to know if that sleeve would fit? I know the shorty cone would.

 

[The White Rabbit]

Thanks jnnfrlsw and Jixchel. Think I'm going to go with one of the shorties, that'll just hide the thread and not obscure the amount of liquid in the tank.