Picking Up My First Mod

[blindsight]

Hi everyone,

I think it's about time I commit to picking up our first mod for my spouse and I.

However, before I fill up the cart with goodies I wanted to get some feedback from the Super T Manufacturing faithful.

We currently both use the Smokeless Image Volt and don't have eGo's. Rather than buy adapters to use our old equipment I wanted to see what we will need to get for the default connection. I believe we can get the 501 to 901 adapter to use our cartomizers but this may be an optional spend. Will the adapter work with the Volt cartomizer?

I'm looking at getting the following:
2 x Precise Plus 18650
2 x AW protected 18650 batteries
2 x Vapemates
2 x Tips
1 x Ultrafire WF 188 Multi Voltage Battery Charger

Now the final pieces are the atomizers and cartridges. What should I pick up, the LR 1.5 or 2.0? Cisco or non cisco?

Finally, it appears that from Super T I can only get one at a time which means I may need to purchase from a reseller instead of directly for Super T.

I apologize for the long thread. We are both pretty excited and after considering pro and cons with the GGTS, Provari and the Precise I think this will be the final decision. If anyone could provide some feedback on the above or if there any other items that we should get it would be greatly appreciated.

Thanks in advance.

 

[GaryS]

I use a precise 16340 with a smoktek dual coil carto. I find they complement each other. With an 18650, you could easily handle any low resistance atty without any issues. Coming from a Volt, you will notice a HUGE improvement in vapor production and throat hit with the Precise with either a low resistance or the dual coil cartos.
1.5s burn hot. So if you like warm vapor and you don't mind your atty getting a little toasty, they are the way to go because they produce much more vapor. If you prefer a lighter hit, then the 2.0 might be better suited to you.

 

[blindsight]

Thanks GaryS. I made my purchase at Happy Vaper and can't wait for it to arrive. We ended up going with the Cisco Atty and got the 1.5 and 2.0 to see what we will like better.

 

[forcedfuel50]

Hi everyone,

I think it's about time I commit to picking up our first mod for my spouse and I.

However, before I fill up the cart with goodies I wanted to get some feedback from the Super T Manufacturing faithful.

We currently both use the Smokeless Image Volt and don't have eGo's. Rather than buy adapters to use our old equipment I wanted to see what we will need to get for the default connection. I believe we can get the 501 to 901 adapter to use our cartomizers but this may be an optional spend. Will the adapter work with the Volt cartomizer?

I'm looking at getting the following:
2 x Precise Plus 18650
2 x AW protected 18650 batteries
2 x Vapemates
2 x Tips
1 x Ultrafire WF 188 Multi Voltage Battery Charger

Now the final pieces are the atomizers and cartridges. What should I pick up, the LR 1.5 or 2.0? Cisco or non cisco?

Finally, it appears that from Super T I can only get one at a time which means I may need to purchase from a reseller instead of directly for Super T.

I apologize for the long thread. We are both pretty excited and after considering pro and cons with the GGTS, Provari and the Precise I think this will be the final decision. If anyone could provide some feedback on the above or if there any other items that we should get it would be greatly appreciated.

Thanks in advance.

Good morning and welcome Blindsight!

The default connection on the entire PrecisePlus line is 510. You can run a 510 to 901 adapter too if needed for your cartos or experiment with some of the 510 threaded cartos if you aren't a fan of adpaters. On atomizers types and resistances, especially with the harder hitting PrecisePlus, you'll want to grab a couple of each to experiment what fits you tastes. The initial release was one per customer, just to make sure everyone has a chance at one. Theres a big batch in the works now that i hope to have in in December and the limit 1 per customer will be no longer.

David

 

[blindsight]

Thanks David for the response. I've ordered from Happy Jack at HV. Can't wait to try it and patiently waiting for P+!

 

[blindsight]

Day 1
Hot damn! We have received our P+18650's and these are awesome. Well done David on making such an excellent mod! The button lock is pure genius and the VapeMate is an awesome complement to our vaping machines at home. We are both getting used to the VapeMate and its not taking too much time at all. Highly recommended for any mod! The finish is as its called is Super Precise. When using it for the first time is it recommended to lube the threads before using it?

Again i can't say how much we love our P+'s. Plumes of vapour on our Cisco 510 1.5 LR attys. I was initially a bit concerned about the flavour without using a cartomizer and I would have to say that my concern has disappeared. In addition, I was also worried about the finish and thought i would have preferred a shiny P+ but the finish is impeccable and I don't have to worry about polishing it all the time and cleaning fingerprints. Just use, vape and repeat. Low maintenance and works as it should.

Now we both have the bug to have something portable while we are out and about. Any suggestions on what people prefer? The P10 or the P+350? I might have to get both of these... Now I understand how everyone ends up with their collections!

Again well done David and I'm glad to be part of the Super T following.

 

[GaryS]

My 18500 arrived today and I was very surprised how small it was. The photos I had seen were all close-ups, so it appears larger than it actually is. Sitting next to my 16340, it still looks "portable."
I haven't had a chance to use it yet though, because the battery is still charging.

The button clearance is not as smooth as my 16340 however. There is a distinct scratching sound of metal against metal as I push it in. Hopefully it will stop with use. Was the clearance made tighter for a reason on the Precise+ line?

Best,
G

 

[snork]

Now we both have the bug to have something portable while we are out and about. Any suggestions on what people prefer? The P10 or the P+350? I might have to get both of these... Now I understand how everyone ends up with their collections!

The P+350 is really something special, though it's hard for me to express a preference between the 350, 500, or 18650. Each has developed its own "personality" and use in my life.
The only experience I've had to compare between a 350 and a P10 is with an older non + P10, and the winner hands down is the 350 if only for battery life, but additionally it's super portable, hard hitting, and exquisitely proportioned. It's like an engineer/mathematician/artist used the ultimate formula to design maximum power within the smallest size.
For some unknown reason I prefer to use a 901 atty on my 350.

 

[blindsight]

Thanks for the feedback! Is the PrecisePlus 16340 much smaller than PrecisePlus 18350? The 16340 isnt available at HV and all the pictures of the Precise Plus line comparisons only show the difference between the P10 then the P+350 and up.

 

[artyoh]

Thanks for the feedback! Is the PrecisePlus 16340 much smaller than PrecisePlus 18350? The 16340 isnt available at HV and all the pictures of the Precise Plus line comparisons only show the difference between the P10 then the P+350 and up.

http://www.e-cigarette-forum.com/fo...reciseplus-18500-18350-a-169.html#post4597919

 

[blindsight]

Thanks artyoh. It took a while but I found that the P+340 is 2mm shorter in diameter than the P+350. Other than that they are the same size.

 

[forcedfuel50]

My 18500 arrived today and I was very surprised how small it was. The photos I had seen were all close-ups, so it appears larger than it actually is. Sitting next to my 16340, it still looks "portable."
I haven't had a chance to use it yet though, because the battery is still charging.

The button clearance is not as smooth as my 16340 however. There is a distinct scratching sound of metal against metal as I push it in. Hopefully it will stop with use. Was the clearance made tighter for a reason on the Precise+ line?

Best,
G

The surface preparation has made the clearances a bit tighter, but it should still be smooth. Maybe disassemble and look for a burr or some debris. Has it smoothed out for you with use? I would rather machine them up on the tight side, as tighter will wear in.

 

[vapn]

I like using my P+18650 everywhere I go. The long lasting battery insures me that I am not going to need to carry extra batteries. I fill up my bottle on the vape mate and pop in a fresh battery before work and I am good to go for the day. I've got the P16340 and hardly use it so I would stick with the P+18 if I were you.