Pictures of your setup

[StrikeIII]

Rocking this:

On this:

Cyclone AFC with 2 coils @ 12 wraps 26g nichrome 80 on a 1/16th bit comes out to .4Ω. Sitting on my Canary beta #0007 - Canary Wood, 10Amp fuse (sub-ohms like a monster, ~.3V drop on a .4Ω coil), SS post/juice nippoh, berrylium copper contact leaf.

You will find wood mods that eat subΩ coils for breakfast here: http://www.e-cigarette-forum.com/forum/modder-accessories-supplier-forum/511889-pdibs-making-mods.html

How do those mods feed into the atty?

 

[ions]

How did you remove the ring. From the picture it looks pretty clean.

Dremel tool more then likely. I've seen it done on my friends.

 

[FACE MEAT]

How do those mods feed into the atty?

The center post is either hollow or has had a channel cut into it to allow liquid to be squeezed up into the atty through the 510 connection.

 

[Jailbird]

Dremel tool more then likely. I've seen it done on my friends.

If this level of clean can be done with a Dremel, kudos to them! I actually used my CNC Mill.

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[Paksoy]

After some cheap (chinese) vv/vw devices I bought my first mech, the JM22. I got the 18350 tube in Carbon and the 18650 in SS.

Carbon

That looks Boss! Where did you get the Carbon JM22? ... it seems to be sold out everywhere.

 

[Paksoy]

If this level of clean can be done with a Dremel, kudos to them! I actually used my CNC Mill.

View attachment 296031

Wow ... I wish I had a million bucks to blow on my own CNC machine. Nice job on the VTR!

 

[gangstafish]

MVP with pt1,sidewinder with pt1,Nzonic v3 with prometheus clone,provari with fluid flask.

 

[X-Puppy]

The center post is either hollow or has had a channel cut into it to allow liquid to be squeezed up into the atty through the 510 connection.

Exactly - the cyclone is available in bottom fed configuration which has a hole drilled through the center post. Then I bought the Adjustable Air Flow cap which accommodates single or dual coil configurations. You change from cloud chasing lung hits to puffer mode with just a quick twist of the cap. Squeeze the bottle at the base until you see juice in your air hole and you're good for a couple of monster hits.

You can find the Cyclone here: AFC (Air Flow Control) Top Cap - for Cyclone RBA - Cyclone Rebuildable Atomizer & Accessories

You can get the AFC cap separately here but coming from London it takes a while: Vicious Ant AFC for Cyclone Atomizers Laser Engraved - NEW [CYCLONEAFC] - £28.99 : E-Cigz London, Discount Electronic Cigarette & cheap E-liquid suppliers, Atomizers, Cartomizers, Batteries, GGTS, Ecigs E-Cigs E Cigs E Cigz

 

[qorax]

GP-SnP, Sophia and Black Honey Tobacco, Wow!

 

[dylanlg2]

My avatar, titan with an igo-L. .4 ohm dual coil. 28g kanthal, 3mm silica. 18650 mnke imr 1500mah. piece of crap drip tip Getting a helios, sony 30amp, and bamboo wick, so I can start some quad coil action

 

[4WLO]

So much awesomeness, you people are a bad influence, lol.
I've only been vapin a few weeks but here's what I got so far.
I got a Kanger Evod starter kit for Christmas. Shortly after that I got a Mini ProTankII v2 and two 1300 Vision Spinners.



The Mini Protank with the spinner is probably my main vape, but I do switch out to the Evod depending on juice and time of day.

 

[WayfaringStranger]

GP-SnP, Sophia and Black Honey Tobacco, Wow!

that is stunning.

 

[Jim Mccarthy]

VTR with a PT2 recoiled with cotton wick

 

[Bunnykiller]

this is my SVD and RSST loaded up with my Nuclear Reactor juice

 

[Chris Waggoner]

Kayfun 3.1 @ 1ohm 3.2v Sigelei Legend Mod (Cotton & Kanthal Ribbon Coil)
Orbtronic 3500mAh Battery and Fogger V2 Drip Tip

 

[ions]

If this level of clean can be done with a Dremel, kudos to them! I actually used my CNC Mill.

Sorry couldn't see such detail on my phone. amazing work. My friend took his VTR ring off with a dremel and sanded it down and its pretty clean but not THAT clean

 

[Randizzard]

Here's today's

Nemmy clone
Patriot rda
With dual 28g cotton @ 0.4 ohm

 

[Randizzard]

Looks better on the poldiac clone tho

 

[Jarbs]

 

[aluren]

Just got my Provari Mini yesterday and it's pretty awesome. Have had only one analog since (hopefully my last)!