Pictures of your setup

[X-Puppy]

Ok so I'm a little excited and couldn't wait to post some Dibby porn.

Here’s the Dibby Canary Beta 0007 – for now I’m calling him 007:

No dust on this one either! It looks better in person.

I came home to it last night, unpackaged and scrubbed a brand new Cyclone AFC, wrapped a .6Ω coil, 7 wraps of 26g Kanthal A1 on a 1/16th drill bit, (redneck coil jig), tested continuity, voltage and resistance everywhere, (see pdibs advice on previous posts) plugged in the coil and cinched er down, and I knew right then this was ordinary bottom feeding wood mod. I haven’t measured voltage drop yet (coming soon to a theater near you) but while I was burning in the coil I could have easily melted it off the posts. No kidding! You won’t be holding down the button and making a flashlight on a Dibby! 

Wicked it up, loaded it with my favorite juice (the notorious NEMP) and…………..

WHOLLY-SEAMING-MONKEY-POO!!! This thing hits like a locomotive on take-off. I’ve never blown clouds like this before. (When you coming back monkey?)

Like others have said, “it’s beautiful”, fits good and feels good in your hand. (hmmm)
Every attention was paid to detail even with the hidden character of this particular beta. Pdib includes everything you need in your little bag of tricks for just about any setup.

Thank you for all your hard work pdib. When I made my first post on this thread #26 I knew exactly what I was looking at. “A work of art made by pdib”! It’s worth every penny and in my case I know I got the better end of the deal. After all, the “Canary Beta 0007 really is priceless”!

Come check it out:
http://www.e-cigarette-forum.com/forum/modder-accessories-supplier-forum/511889-pdibs-making-mods.html

 

[super_X_drifter]

Ok so I'm a little excited and couldn't wait to post some Dibby porn.

Here’s the Dibby Canary Beta 0007 – for now I’m calling him 007:

No dust on this one either! It looks better in person.

I came home to it last night, unpackaged and scrubbed a brand new Cyclone AFC, wrapped a .6Ω coil, 7 wraps of 26g Kanthal A1 on a 1/16th drill bit, (redneck coil jig), tested continuity, voltage and resistance everywhere, (see pdibs advice on previous posts) plugged in the coil and cinched er down, and I knew right then this was ordinary bottom feeding wood mod. I haven’t measured voltage drop yet (coming soon to a theater near you) but while I was burning in the coil I could have easily melted it off the posts. No kidding! You won’t be holding down the button and making a flashlight on a Dibby! 

Wicked it up, loaded it with my favorite juice (the notorious NEMP) and…………..

WHOLLY-SEAMING-MONKEY-POO!!!This thing hits like a locomotive on take-off. I’ve never blown clouds like this before. (When you coming back monkey?)

Like others have said, “it’s beautiful”, fits good and feels good in your hand. (hmmm)
Every attention was paid to detail even with the hidden character of this particular beta. Pdib includes everything you need in your little bag of tricks for just about any setup.

Thank you for all your hard work pdib. When I made my first post on this thread #26 I knew exactly what I was looking at. “A work of art made by pdib”! It’s worth every penny and in my case I know I got the better end of the deal. After all, the “Canary Beta 0007 really is priceless”!

Come check it out:
http://www.e-cigarette-forum.com/forum/modder-accessories-supplier-forum/511889-pdibs-making-mods.html

That is a bad AYuss mod. It is the only mod aside from REOs that I would even consider owning.

Great write up bro.

 

[xzmt]

Just got my Nano Kit from eBay to complete my setup!

 

[evgeny131]

...out...going to a drill press...to be back with more info...

 

[floridaBMW]

KF Lite brass Ohman DT and UVO Hades.

Ken

Sent from my iPhone using Tapatalk

 

[Dontknow]

Simple and straightforward...

Got a brass one too - so this ones got to go...

 

[pastubbs]

trident 1....
dual coil 0.28ohms...0.9mm ribbon 3 wraps...
im used to it...same wrap/ohms on trident 2- air holes a bit bigger- but the vape is perfect for me...
it seems like the 3d would not quite suit me at the time...unfortunately....or u think this kinda wrap is easy on it?

Atmomixani- Congratulations! Definitely a major winner here!

Naval Brass 69 #0080, 3D Dripper #0413

The 3D pump-action dripper gets 9/10 from me...it will deserve 10/10 when the air holes are big enough to accommodate a sub-ohm tolerance properly!
The air holes need to be drilled! The best vape I am able to get stock is -single coil, 3 wraps of 0.9mm ribbon. Resistance? It's a hybrid for a mech! The pump works great- the posts are very comfortable- overall build/design is fantastic! It's ridiculously fast to light up as a hybrid on a naval brass 69!

My Nemesis is begging for one of these.

 

[stylezuk]

Back: UDT-v9 with KFL+ "Klon" / The Vengeance with Trident v2 / Cerberus with Atomic
Front: UDT-TD / UDT-W3 / UDT-W3

 

[Oolong]

King Beta #1

 

[ions]

made pizza balls with my girlfriend. they are delicious. having a magic hat #9 and vaping unicorn blood on the SVD.

 

[Ahoy]

Another new tank, the aspire nautilus I freaking love this thing!


Sent from my iPhone using Tapatalk

 

[stylezuk]

Another new tank, the aspire nautilus I freaking love this thing!


Sent from my iPhone using Tapatalk

Awesome to have a 22mm tank just shame that it's like an acorn at the top.

 

[Ahoy]

Awesome to have a 22mm tank just shame that it's like an acorn at the top.

I kinda like the new-age style of it. But I would have been happy if they stole the PT2 style as well *shrugs*

 

[rojo]

made pizza balls with my girlfriend. they are delicious. having a magic hat #9 and vaping unicorn blood on the SVD.

+1 not quite pale ale. I might have to have one myself now.

Simplicity Ti 18350 + Immortalizer. I'm dripping diy coconut vanilla cupcake with a touch of cream cheese icing. Tasty!

Sent from my SCH-I405 using Tapatalk 2

 

[qorax]

Some pictures are worth pinning-up

My just arrived Mini alongwith it's month+ old elder bro

 

[Harleybarbie]

I just picked up a new tank today, my first!

I'm so lovin' this beautiful tank! It's a 22mm halfling, filled with DFW Blue Hawaiian on my MVP and on a 650 ego battery


Sent from my iThingy using Tapatalk

 

[Dominick0311]

"Aren't you tired of getting dirt dicked in your face" Nacho Libre

 

[RubyRoo]

My new kayfun mini 2.1 on a mini turtle ship. Hits like a champ

Hey! I have that same setup! Check out my post on page #1279. Hits like a little train. Great mod and GREAT RTA all together. Cheers!

 

[ckim0118]

Some pictures are worth pinning-up

My just arrived Mini alongwith it's month+ old elder bro

Which rings you using with your vari, I have heard some issues with certain rings and KFL+, trying to make sure I get the right one without problems for my KFL+ and vari


Sent from my iPhone using Tapatalk

 

[Benztee]

Still in my first month of vaping. But here is what I'm starting out with. Although I am quickly realizing I will be spending some $$$ on various other set-ups to gain a vaping arsenal of sorts.